Consumer received recall 96v099000 concerning ABS brake failure. Abs brake light came on and stayed on. After driving 45 MPH, consumer smelled a burning odor. Consumer left the vehicle, but saw nothing burning. After getting back into the vehicle, and when pressing the brakes, consumer felt a pulsing sensation. Also, vehicle had four transmissions installed.
1990 Dodge Dynasty: brake failure
5 of the 55 complaints about the 1990 Dodge Dynasty describe brake failure.
- owner complaints
- 5
- of this car's complaints
- 9%
- recalls
- 2
Is there a fix? There are 2 recalls for this area of the car. See below
Brake failure by model year
What owners say
The ABS system failed and driver went through red light with no brakes. I am a friend of colledge student who is a friend of my sons, so I am kind of in the middle attempting to get this serious problem fixed. I know the car is old and chrysler says no recall is in effect now but this car has ABS recalls and we want to know if chrysler should contribute to the resolution of this obvious defect?
While driving at 30 MPH went to apply the brakes and the ABS brakes failed, causing the consumer to go around another vehicle and the vehicle slowed down. The consumer took the vehicle to the shop for repair service, and the dealer took care of the problem replacing the wire that had corrosion
Abs/brake warning lights came on due to loose bleeder screw, also brakes failed twice, once due to failed accumulator.
Brake and anti brake warning light came on pedal went to the floor hit a deer. Resulting in extended stopping distance. Tt
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- The ABS hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
- Risk
- If this condition occurs, the ABS function could be lost and reduced power assist would be experienced during vehicle braking increasing the potential for a vehicle accident.
- Remedy
- Dealers will test the vehicle's anti-lock brake system and repair the vehicles if necessary. Also the warranty on all ABS components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). Owners will also be reimbursed for previous ABS component repair costs.
Recall number 96V099000 · Recall details
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- The anti-lock brake system high pressure hose may leak or detach at its crimped end fitting resulting in the discharge of hydraulic fluid.
- Risk
- Fluid discharge eventually causes the loss of both theanti-lock brake system and hydraulic assist for the brake system, resulting inincreased likelihood of brake lockup and increased stopping distances, whichcould result in a vehicle accident.
- Remedy
- Replace the ABS high pressure hose with a hose of different design and construction.
Recall number 91V191000 · Recall details
Questions about the 1990 Dodge Dynasty brake failure
Is brake failure a common problem on the 1990 Dodge Dynasty?
5 of 55 owner complaints about the 1990 Dodge Dynasty (9%) mention brake failure. The model year with the most reports is 1992.
Is there a recall or service bulletin for this on the 1990 Dodge Dynasty?
There are 2 recalls and 0 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 1990 Dodge Dynasty
VIN decoder
See the problems and recalls for an exact car
Buying a used 1990 Dodge Dynasty?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history