The vehicle stalls when slowing down or stopping at a stoplight. No codes appear and the power steering and brakes no longer work. The vehicle may startup immediately or take two hours to restart. The radio and lights work, but the gauges don't engage when trying to restart the car. The problem occurs during warm weather days. The problem has occurred a number of times when my teenage son has been driving the vehicle. I'm afraid the vehicle will stall and place me in a dangerous situation. The problem has occurred a tremendous amount of times over the past year.
2000 Dodge RAM 1500: engine stalls while driving
13 of the 513 complaints about the 2000 Dodge RAM 1500 describe engine stalls while driving.
- owner complaints
- 13
- of this car's complaints
- 3%
- typical mileage
- 90,567
- recalls
- 0
Engine stalls while driving by model year
What owners say
Tl* the contact owns a 2000 dodge ram 1500. While driving 55 MPH, the vehicle stalled. The vehicle was taken to the dealer for diagnostic testing. The contact was notified that the PCM (pulse code modulation) needed to be replaced. The contact stated that the PCM had been replaced three times; however, the failure recurred. The contact also stated that while driving, the vehicle stalled and caused the contact's vehicle to become rear ended by another vehicle. The contact sustained injuries to the back and neck that did not require medical attention. A police report was not filed. The vehicle was towed to the dealer. The vehicle was repaired, but the details were unknown. The manufacturer was notified of the failure. The approximate failure mileage was 205,000. The VIN was not available.
Tl* the contact owns a 2000 dodge ram 1500. The contact stated that the dashboard was cracking and the electrical wires shorted and melted. The contact also mentioned that the vehicle stalled. The vehicle was merged to the shoulder of the road and was towed to the contact's home. The contact replaced the defective wires. The VIN was unavailable. The manufacturer was not notified of the failure. The approximate failure mileage was 120,000.
Tl* the contact owns a 2000 dodge ram 1500. The contact stated while driving 65 MPH, the vehicle suddenly stalled without warning. The vehicle was towed to a mechanic shop who advised the contact that the computer was faulty and needed to be replaced. The parts needed for repair were on back order. The vehicle was not repaired. The manufacturer was not notified. The failure mileage was 104,000.
Engine shuts off while driving and stops in the middle of the highway. This happens several times per day. To start the engine back up, I have to come to a complete stop, cut the ignition switch completely off, wait 1-5 minutes, cut the ignition switch completely back on and if the gas meter gauge comes on, then the engine will start up again. The engine will cut off again while driving in 1 minute to a few hours.
My dodge truck driving on the freeway at 65 all gauges zero out and the no bus reading is displayed on the odometer readout the truck is unresponsive losing power all warning lights are displayed on instrument panel. The truck now stalls at stop lights and runs rough. It has been at two shops the shops have replaced the computer the instrument cluster the body control module and has checked every wire and has not found any solutions.
Tl*the contact owns a 2000 dodge 1500. While driving 40 MPH, the air idle valve did not open and caused the vehicle to stall when the brakes were applied. The contact believes that there is a defect in the design of the vehicle. The air idle valve was installed backwards and should remain in the open position to allow air to enter and for the vehicle to properly close. The failure occurred on two occasions. The contact took the vehicle to the dealer and they replaced the valve, which was installed in the same manner. The repair lasted for a year, but the failure has recently resurfaced. The VIN was unknown. The failure mileage was 100,000 and current mileage was 112,000.
Vehicle keeps stalling out while driving. I could be doing 60 MPH or I could be doing 25 MPH. There would be no warning it would just die. Lucky for me I was able to restart the vehicle in a few minutes. I brought it into the dealer 5 times to fix still it isn't running properly. They replaced numerous wires & the crank sensor. This has been going on since 10/07 and as of 1/5/08 problem still occurring. (5 times in total).
Dt*: the contact stated while driving various speeds the vehicle stalled without warning. The vehicle was maneuvered off the road and restarted. The dealer replaced the battery cable last week however the problem reoccurred. The dealer ordered a power train control module.
While driving at 55 MPH, the vehicle made a grinding noise and stalled. Other than the grinding noise, there was no other indication that there was a problem with the vehicle. The manufacturer and the dealer are aware of the problem.
The vehicle stalled, which caused consumer to abruptly pull over.
While driving vehicle will stall. Vehicle has been checked by dealer several times, who advised consumer he could not duplicate problem. Very consumer concerned about safety while driving.
Service bulletins that may apply
Related recalls
No recalls on record for this model year.
Questions about the 2000 Dodge RAM 1500 stalling
Is engine stalls while driving a common problem on the 2000 Dodge RAM 1500?
13 of 513 owner complaints about the 2000 Dodge RAM 1500 (3%) mention engine stalls while driving. The model year with the most reports is 2004.
Is there a recall or service bulletin for this on the 2000 Dodge RAM 1500?
There are 0 recalls and 3 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2000 Dodge RAM 1500
No deployment 20Ball joint 17Headlights 14ABS 9Transmission failure 8Grinding brakes 6Slipping 5Pulling 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2000 Dodge RAM 1500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history