1999 Dodge RAM 2500 seat belts problems

Filed Dec 18, 2018 · Seat belts · OK

After relatively short life, the seat belt control timer module fails, leaving seat belts inoperable - a significant safety hazard!! Seat belts remain in a locked position, preventing use while driving. Dodge p/n 56043003ad. Dodge has received reports about the problem along with requests to purchase part, for many years but has chosen to stop production of the part. That would not be as big an issue if they had ensured an ongoing supply from third party vendors. As it stands, they have created a major safety crisis for tens of thousands of users of the late 90's to early 2000's trucks.

Filed Dec 13, 2016 · Seat belts · 235,000 miles · TN

Seat belts fail to lock at braking and also fail to retract

Filed Nov 30, 2016 · Seat belts · 130,000 miles · NC

Seat belts are locked in a retracted position. This was first noticed upon entering the vehicle after it had been parked. The seat belt control timer module (sctm) is likely the cause of this malfunction. This part is no longer being manufactured, so the seat belts remain unusable.

Filed Oct 30, 2014 · Seat belts · 200,000 miles · WA

Seat belts lock and can not be pulled out. This happens when vehicle is and is not moving. It also happens when passengers are able to wear them. It is so random. The seat belt light is on and seat belts are locked so they can not be put on. The seat belt timer, located under the middle of front seat which is the cause of this issue can not be purchased from dodge, it is on long term back order. This is a safety issue that dodge corporation needs to address as it is not legal to operate vehicle under these conditions.

Filed Jul 28, 2014 · Seat belts · 168,000 miles · AL

Tl* the contact owns a 1999 dodge ram 2500. The contact stated that while driving approximately 70 MPH the seat belts suddenly seized. The contact eventually experienced difficulty breathing because the seat belt had erroneously tighten too much. The contact indicated that the failure was present with all the seat belts in the vehicle. The vehicle was taken to the dealer who diagnosed that the seat belt module was defective and would need to be replaced but parts were not available. The manufacturer was notified of the failure. The failure mileage was 168,000.

Filed Jul 28, 2014 · Seat belts · 168,000 miles · AL

When traveling on interstate seat belts starting retracting and would not release and gets tighter with every little movement. The only way to release was to shut off vehicle and open door. This has started to happen every time when going more than 25 - 30 miles. I contacted the dealership and was told the part to fix this was on national backorder. I searched the internet to see if I could find a part and was told by another dealership that 129 of these parts were on backorder and seems that none have been shipped in a while. My vehicle is inoperable with out the use of the seat belts.

Filed Sep 22, 2011 · Seat belts · 104,000 miles · WY

Tl* the contact owns a 1999 dodge ram 2500. The contact stated both the driver and passenger side front seats belts failed it does not pull out, extend, or protract. The vehicle was not taken to the dealer for diagnostic testing, but the manufacturer was contacted and confirmed the VIN did not qualify under the federal safety agency campaign id number:01v119000(seat belts:front:retractor). The vehicle was not repaired. The failure and current mileage was 104,000. *tr updated 09/27/10

Filed Feb 1, 2010 · Seat belts, Visibility · 112,000 miles · NY

Tl*the contact owns a 1999 dodge ram 2500 which was purchased in 2008. He stated that the front drivers side seat belt retractor would lock intermittently without depressing the brakes. He could not operate the vehicle adequately while locked tightly into the seat. The dealer stated there were no recalls and no repairs were made to the seat. He also stated the front windshield wiper motor failed and the wipers were inoperable. The dealer stated that the tire module needed to be replaced at the owner's expense. No repairs were made to the vehicle to date. The failure and current mileages were under 112,000.

Filed Dec 8, 2009 · Seat belts · 124,000 miles · TX

Tl* the contact owns 1999 dodge ram 2500. While driving between 55-60 MPH the "seat belt" warning light indicator illuminated on the instrument panel, and then the front passenger and driver shoulder belt violently tightened on the occupants without warning. The driver pulled over to the side of the road and was able to release from the webbing by exerting great force. The driver assisted the passenger side occupant out of the seat belt entrapment. The failure occurred intermittently. The vehicle was in the process of being taken to an authorized dealer for inspection. The failure and current mileages were 124,000. The vehicle identification number was unavailable.

Filed Dec 1, 2008 · Seat belts · 150,000 miles · WA

Tl*the contact owns a 1999 dodge ram 2500. He noticed that the front passenger and driver side seat belt assemblies are stuck in a retracted position. The retractor does not work properly and will not adequately protect occupants in the event of a crash. He notified the dealer in reference to recall# 01v119000 (seat belts:front:retractor). A technician stated that his VIN was not included; therefore, they would not assume financial responsibility for the repair. The vehicle was not repaired. The failure mileage was 150,000. The current mileage was 152,000.