2010 Ferrari 458 Italia problems

What is wrong

Ferrari North America, Inc. (Ferrari) is recalling certain 2010-2015 458 Italia, 2012-2015 458 Spider, 2014-2015 458 Speciale, 2015 458 Speciale Aperta, 2016-2019 488 GTB, and 488 Spider vehicles. The brake system may leak brake fluid, resulting in a loss of braking ability.

Risk

Loss of braking ability increases the risk of a crash.

Remedy

Dealers will replace the brake fluid reservoir cap and update the software, at no charge. Owner notification letters were mailed on March 4, 2022. Owners may contact Ferrari customer service at 1‑201‑816‑2668. Ferrari's number for this recall is 78.

Recall number 21V833000 · Recall details

What is wrong

Ferrari North America, Inc. (Ferrari) is recalling certain 2009-2011 California and 2010-2011 458 Italia vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Risk

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy

Ferrari will notify owners, and dealers will replace the front passenger air bag assembly with an alternate one, including a new non-ammonium nitrate inflator, free of charge. The recall began March 8, 2020. Owners may contact Ferrari customer service at 1‑201‑816‑2668. Ferrari's number for this recall is 60FL.

Recall number 20V007000 · Recall details

What is wrong

Ferrari North America, Inc. (Ferrari) is recalling certain 2009-2011 Ferrari California, and 2010-2011 Ferrari 458 Italia vehicles that have not had their passenger frontal air bag replaced. These passenger frontal air bag modules have air bag inflators that may explode in the event of a crash due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk

An inflator explosion may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy

Ferrari will notify owners, and dealers will replace the passenger frontal air bag assembly with one that uses an alternate inflator, free of charge. Owners may contact Ferrari customer service at 1‑201‑816‑2668. Ferrari's number for this recall is 60A. Note: This recall supersedes recall 16V‑341.

Recall number 18V188000 · Recall details

What is wrong

Ferrari North America, Inc. (Ferrari) is recalling certain model year 2009-2011 Ferrari California vehicles manufactured February 16, 2009, to July 8, 2011, and model year 2010-2011 458 Italia vehicles manufactured March 5, 2010, to July 29, 2011. These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment. In the event of a crash necessitating air bag deployment, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy

Ferrari will notify owners, and dealers will replace the passenger frontal air bag assembly, free of charge. The recall began October 30, 2017. Owners may contact Ferrari customer service at 201‑816‑2668. Ferrari's number for this recall is 60.

Recall number 16V341000 · Recall details

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA21002

the federal safety agency's Office of Defects Investigation (ODI) has received two complaints and verified a third allegation in a public forum alleging fuel loss from the subject vehicle originating from the fuel fill location while in motion. The Model Year (MY) 2010 ? 2015 Ferrari 458 (subject vehicle) has two built-in systems that are designed to prevent fuel loss: the capless fuel filler and the anti-spit back valve. Damage to the capless fuel filler was noted in all three incidents. Failure of the capless fuel fill neck and/or the anti-spit back valve to seal the fuel system may allow fuel loss from the vehicle during left-turn maneuvers. Fuel loss amounts may vary based on the lateral load exerted during these maneuvers and the level of fuel in the system.ODI is opening this preliminary investigation to characterize the scope, severity, and circumstances of the reported conditions and to fully assess their safety impact. The ODI reports cited above can be reviewed at: http://www-odi.the federal safety agency.dot.gov/owners/Searchreference using the following complaint identification numbers: 11383083, 11400409

PE21012