Windshield wiper blade action slows down or comes to a stop, no matter low speed high speed or intermittent. Driving at 55 mph at early morning darkness during a heavy rain the windshield wipers come to a complete stop. Oncoming traffic headlights glaring through the rain soaked windshield provided almost zero visibility. Quick action had me reaching for the wiper control to fiddle with it upon which the wipe motor started up again, no matter the position the blade continually stopped, unless I constantly flipped the wiper stalk from high to low to keep the blades functioning. I have a manual transmission, imagine trying to shift gears with one hand, flipping the wiper stalk with another all while maintaining control of the vehicle. This not only endangers me, but others on the road should I lose control and hit them head on! What component or system failed or malfunctioned, and is it available for inspection upon request? WINDSHIELD WIPERS How was your safety or the safety of others put at risk? TOTAL LOSS OF VISION OUT THE WINDSHIELD Has the problem been reproduced or confirmed by a dealer or independent service center? NO HOWEVER OTHERS HAVE REPORTED THE SAME ISSUES. VISIT THE FOLLOWING FORUMS - BRONCO6G - https://www.bronco6g.com/forum/threads/wiper-control-speed-issues-urgent-safety.31809/ - BRONCO NATION - https://thebronconation.com/issues-repair-and-warranty-n.154/bronco-2-door-windshield-wipers-weird-%E2%80%9Cfeature%E2%80%9D-when-on-high-or-low-speed-t.16155/page-1 Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? AS OF NOW SEVERAL NEW CAR DEALERSHIPS HAVE BEEN CONFRONTED WITH CUSTOMERS PROBLEMS, SOME HAVE REPLACED THE WIPER MOTORS Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? NO PRIOR WARING, JUST COMPLETE STOPPAGE
2023 Ford Bronco visibility complaints
Page 3 of 4: complaints 41 to 70 of 96, newest first, as owners wrote them.
When windshield wipers are on high speed during a storm they will slow down after 30 seconds to a speed of wiping the window maybe every 5 seconds causing a significant reduction in visibility.
The contact owns a 2023 Ford Bronco. The contact stated that while driving approximately 70 MPH in inclement weather, the windshield wipers were activated on high-speed but failed to operate at the highest setting. The contact stated that the windshield wiper defaulted to intermediate speed and deactivated and turned off independently on other occasions. The contact stated that there was a safety feature to deactivate the windshield wipers if the windshield was dry however, it was raining and snowing so the feature should not have been activated. The contact stated that his vision was affected by the failure. The contact toggled with the settings, causing his attention to be diverted from the road which could have caused a crash. The contact stated that the windshield wipers then activated independently. The vehicle was driven and parked at the residence. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 2,200.
Wiper control issue - when the wipers are set to the standard slow or fast speed the wipers start to slow down after about 30 seconds and eventually go into intermittent. We have experienced this in the pouring rain, while traveling with children and it makes it impossible to see. We have contacted 2 dealerships, and both were able to replicate the problem and acknowledged it. However, Ford will not acknowledge that there is a problem, and we are told that there is nothing that they can do. We also called Ford Customer Service and were told to read page 100 of our owner's manual and if we still had problems to seek out dealerships until we got a resolution.
During moderate rain the wipers were turned on and switched between the top 2 speeds. After a short period of time it automatically goes into a very slow intermittent mode causing loss of visibility. From my understanding this is part of fords “smart wiper” system to save the motor from burning out. This is extremely dangerous and almost caused an accident. I have video of this condition.
When wipers are used on higher settings during moderate rain it will maintain speed for a short period of time then automatically go to a very slow intermediate speed on its own. This caused zero visibility without warning. My understanding is they do this to protect the wiper motor and do not value lives by causing obstructions in my vision. I have video of the issue.
When driving at any speed from local roads to highways in inclement weather from light rain to sleet to heavy rain, the wipers revert from high speed to intermittent (slow) speed after a period of 30 seconds to 2 minutes and do not revert back to the necessary speed for safe vehicle operation. During sleet and heavy rainfall it became difficult to see out of windshield and I had to keep adjusting the speed of the wipers every 30 seconds to 2 minutes in order for them to operate correctly. Vehicle was brought into the service department at a Ford dealership and I was told it is a “feature of the Smart Wiper Motor Operation” and to pick up the vehicle with no repair available. According to service department it is Ford Special Service Message #51377. I have also found the statement referred to as “SSM 50692” in my own research.
While driving in the rain the windshield wipers will randomly slow down to a very unsafe level, making it very difficult to see out of the front windshield. I talked with the dealership and they said there is no known fix for this issue. Ford does not seem to have an answer either. This happens every time the wipers are on. And happens frequently, like every 30 secs the wipers will slow way down. They are not rain sensing wipers.
Windshield wipers operate for a limited time before slowing & then stopping completely. Multiple adjustments are required of the wiper control to reactivate the wipers. However, after a few minutes, the wipers will again slow & stop functioning completely. This situation creates a safety hazard, due to limited visibility & obscured driving conditions, during wet conditions.
When driving in rainy conditions, the windshield wipers cease to function at the selected setting. This happens at any setting. Specifically, after approximately 30 seconds, the windshield wipers slow to a greatly reduced and intermittent speed. This causes extreme issues with visibility, which in turn, creates a major safety issue, especially at highway speeds. This is not one incident. It happens every time the windshield wipers need to be turned on due to visibility.
This is the same complaint as #11509166. I couldn't find a way to add more documentation to the already filed complaint so here is the original information plus more complaints and examples of the safety issue. .... https://www.bronco6g.com/forum/threads/wiper-control-speed-issues-urgent-safety.31809/ .... https://youtu.be/9F8Gc2Huejo .... After less than a minute of running, the wipers suddenly slow down to the lowest wiper delay setting. You notice because, if you're in a storm or rain, you suddenly can't see out of the windshield. It does this on all of the wiper settings. If you're in a bad storm and you have the wipers running on maximum, they suddenly stop and go to like a once every 30 second wipe. you have to constantly turn the wiper control back and forth the whole time you're driving to keep the wipers working.
I was driving in rain and the wipers were initially working fine. Then for no reason they just started slowing down. The rain was still heavy and the vehicle does not have rain sensing wipers so there is no reason they should have slowed down. I had to keep changing the wiper speed from high to low to high to get it back to the necessary speed. This is a major safety issue that the wipers do not work consistently.
In moderate or even heavy precipitation the vehicle will reduce wiper speed from high or low continuous to intermittent, severely reducing and limiting visibility. I took it to Corwin Ford in Reno to fix this and they say that it does this on purpose and it is working as designed. Picture was taken while it was doing this, even with this much rain on the windshield the wipers won't stay in low constant and reduces the wiper speed to intermittent resulting in this level of visibility.
Windshield wipers stop moving at regular wiping speed. After a short time the wipers change from regular speed to intermittent speed causing loss of vision to the road ahead during rain and snow.
When attempting to use the wipers on low speed setting (constant on at a low speed, not on any of the intermittent settings) in medium and heavy rain situations, the wipers will initially operate at the constant low speed, and then after 1 to 2 minutes, the wipers will slow down significantly to a very low speed intermittent speed. The only way to get the wipers to return to the constant low speed setting is to switch the control stalk setting to high speed wipers and then return the switch to the low speed setting. Even when turning on the wipers at the high speed setting, the wipers will slow down significantly to a very low intermittent speed. This is a dangerous condition that creates issues in attempting to see during steady rain conditions.
Windshield wipers slow down when driving in rain/snow. Even on the highest setting, they start to slow down after a few minutes and you have to toggle them off and on again to get them back to normal speed.
Wiper motor does not stay on Low or High. Within a minute, they revert back to Intermittent and the driver must constantly switch between Low and High in order to keep visibility. This has been happening since the day I took delivery (in the rain). I will be contacting the dealer on 3/6 to discuss. Many others in forums have reported the same exact behavior. There has been no inspection yet. No warning lamps, etc.
Wipers automatically dramatically slow down when placed in the high setting during heavy rains causing unsafe driving conditions
I was driving in moderate rain today and had the windshield wipers in the low setting (continuous wipe, not intermittent). After approximately 60 seconds, the wipers stopped continuous wipe and I could not see. I switched to high, the wipers began working again so I switched back to low. 60-90 seconds later, the wipers once again stopped their continuous wipe, I could not see, so switched to high to get them working again. I continued my drive, having to switch the function from low to high to keep them operating. When the rain let up, I was able to see when the wipers quit and noticed they decided to wipe intermittently, despite being in the low (continuous) position. As my drive continued the rain let up a little, I switched to intermittent high (shortest delay). This function worked for about 10 wipes, then the delay increased and I couldn't see between wipes and had to manipulate the switch again to gain visibility of the road and oncoming traffic. To answer the questions I offer the following: 1. The wipers do NOT work in the position selected even if there is significant water on the windshield. 2. When the wipers stop working, you can't see out of the windshield. This requires constant manipulation of the switch, taking a hand off the wheel which endangers me, any occupants, and others on the road. 3. I have not gone to the dealer. I read the 25 page post on the B6G forum and found many others have experienced this as well and a link for this site to post the issue. 4. It has not been inspected by anyone. 5. There were no warning lamps, messages, or other symptoms. The vehicle only has 700 miles and this is the first time I've driven it in the rain when I needed continuous wipers.
Wipers run normal speed for 39 seconds and they revert back to five seconds in between wipes, no matter what the rain conditions or settings
Windshield wipers fail to maintain consistent operation. Cadence slows down on its own to an unusable speed causing unsafe visibility. Clearly there is something wrong with the programming.
When wipers are on they will intermittently stop even when in run mode. No change in how hard the rain is coming. Causes inability to see anything. Will sometimes start back up but usually can't wait that long and chandelier to fast mode to get them moving again
Wipers will slow down during constant on operation is selected, in low and high speed mode. They wipe as normal for 30-45 seconds, then start a slow speed wipe (in high or low, both slow to a crawl) for 2-3 wipes, then stop completely until the switch is changed to another setting. Then the cycle repeats. Makes driving in anything more than a drizzle challenging to see while constantly fiddling with the wiper switch.
The contact owns a 2023 Ford Bronco. The contact stated that while driving at an undisclosed during inclement weather, the contact activated the windshield wipers; however, the wiper blades started wiping very slowly until the wiper blades became inoperable. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 900.
Wipers have some type of smart setting and the will actually stop working in heavy rain situations. Very dangerous configuration
Wipers function for about 30 seconds on continuous, then go to intermittent, then stop. Does this at all speeds and all rain settings (heavy to light rain). Constantly having to turn wiper off and on to get it to function. Makes it difficult to see in rainy weather.
The wipers slowed and stopped during heavy rain making visibility very poor. I had to manually turn the wiper speeds in order to see the road.
When wipers are on slow speed, after 17-22 sweeps will either stop, or to slow intermittant, does not matter on amount of water on the windshield. SSM FROM FORD IS NOT AN ANSWER. WIPERS SHOULD STAY ON
After less than a minute of running, the wipers suddenly slow down to the lowest wiper delay setting. You notice because, if you're in a storm or rain, you suddenly can't see out of the windshield. It does this on all of the wiper settings. If you're in a bad storm and you have the wipers running on maximum, they suddenly stop and go to like a once every 30 second wipe. you have to constantly turn the wiper control back and forth the whole time you're driving to keep the wipers working.
So when wipers are on fast or slow constant mode that they slow down and go into a slow intermittent mode all on their own. After about 35 seconds the wipers start to slow down then after 50 seconds they stop causing a serious safety concern. This has now happened several times. I was unable to see in front of me and almost hit another’s car. There were no warning lights. I am taking to a dealer next.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2023 Ford Bronco?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history