1998 Ford E-250 technical service bulletins
30 technical service bulletins and manufacturer communications cover the 1998 Ford E-250.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This SKU is a front upper ball joint
- Brake booster system may exhibit a brake pedal kickback and/or grabbing condition when applying the brakes
- Vibration/harshness above 45 mph (72 km/h) after tire balance
- A bump steer steering feeling, noted when the vehicle's front wheels/tires contact road surface irregularities
- Malfunction indicator lamp (MIL) illumination with no hard fault
- Vibration / roughness on acceleration or under load at about 50-55 mph. tt
- Concerns with bump steer steering feeling noted when front wheels / tires contact road surface irregularities
- Some vehicles without front brake dust shields may exhibit premature wear of the front wheel bearings
- Some vehicles may exhibit a fuel fill valve sealing condition
- Subject regarding overview of bi-fuel cng vehicle parameter identification data (PID), inputs and outputs...
- Driveline vibration / roughness on acceleration or under load at about 50
- Some bi-fuel vehicles may exhibit a no start condition
- This bulletin involves fuel door label application / replacement
- Vehicles without front dust shields may exhibit premature wear of the front wheel bearings due to damaged...
- Subject on engine coolant leaking into the engine oil on some vehicles
- Information regarding a change in the torque values of the engine front cover water pump bolts
- Information regarding front cover & water pump bolts-torque valve revision/3.8-4.2L
- Concerns with the oil dipstick and / or pcv valve dislodging from the engine and / or engine oil leaking...
- Concerns with engine coolant leaking into engine oil on some vehicles
- Addressing tire balance hints
- Subject regarding tire balance hint
- Special field action regarding revised waranty information
- Malfunction indicator lamp on, with P0300 - P0308 misfire diagnostic trouble codes with a 4.6L engine
- Some vehicles may exhibit brake rotor checking or signs of excessive heat build-up
- Excessive white smoke
- Symptoms regarding P0300-P0308 misfire dtcs with 4.6L engines
- Some vehicles with the 4.2L engine may exhibit a vibration or boom, off idle between 870-900 rpms
- Some vehicles equipped with the 4.2L engine may exhibit a vibration or boom, off idle between 870 - 900 rpms
- Some vehicles may experience boom / vibration noise off idle during acceleration and deceleration
VIN decoder
See the problems and recalls for an exact car
Buying a used 1998 Ford E-250?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history