The contact owns a 2013 Ford Edge. The contact stated that while driving 35 MPH and coming to a stop light, the brake pedal was depressed, and the brakes were inoperable. The contact stated that he was able to safely drive the vehicle to the residence. The vehicle was taken to the dealer where it was diagnosed with hydraulic control unit failure. The contact was informed that the hydraulic control unit needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 127,526.
2013 Ford Edge brakes complaints
Page 7 of 22: complaints 161 to 190 of 634, newest first, as owners wrote them.
The contact owns a 2013 Ford Edge. The contact stated that while depressing the brake pedal, the brake pedal went to the floorboard with an abnormal whining sound coming from the brake pedal without warning. The vehicle was taken to an independent mechanic and was diagnosed with a defective brake booster. Upon investigation, the mechanic discovered Technical Service Bulletin: 13N02 (Brake Booster) which he linked to the failure. The manufacturer was notified of the bulletin but offered no assistance. The vehicle had yet to be repaired. The failure mileage was approximately 143,000.
Braking is delayed Car is still traveling once brake is applied Hear a hissing noise Took to auto repair Technician said he cannot fix This is the 8th Ford Edge that he has unsuccessfully repaired Believes it is actuator
In my experience, as I was driving the vehicle in July of 2021, I pressed on the brake pedal with my foot and the vehicle did not stop. I rolled directly into an intersection. Thankfully I was not traveling at a high rate of speed and no one was coming in the opposite direction. This could have 100% caused a serious accident. I feel extremely lucky that it did not. I have 2 young children that were in the vehicle. There was absolutely no prior warning that there was any issue with the brakes or anything else for that matter. According to the independent service center that the vehicle was taken to, the problem was confirmed to be a faulty Brake Booster. The Brake Booster was replaced for a total cost of $743.81 including parts and labor which I paid for out of my pocket. I am the second owner of this vehicle which I purchased in earlier in 2021. At the time of the repair I was not aware of the fact that Ford Motor company had issued an extended warranty for the Brake Booster (which has since expired). I only found this out in August 2023 when I brought my vehicle in for inspection. I have tried to contact Ford Motor Co regarding this issue and I have requested a reimbursement for the parts and labor which has been denied (even though the repair was made within the extended warranty period). I am strongly suggesting that this part be RECALLED as it presents a serious life safety concern that Ford Motor Co is obviously aware of.
My vehicle on paper would qualified for the Ford Customer Satisfaction Program 13N02 for brake booster replacement. Not sure why VIN is not coming up under the program. I have a 2013 Edge and just had a brake booster failure with delayed braking (not sure when the vehicle would come to a stop) and hissing when brake pedal is pressed. I took it to a Ford affiliated repair shop for diagnostic and found brake booster "inoperable". Other 2013 Edge vehicles assembled at the same factory in the same year were included in the replacement program. I have attempted to contact local Ford dealerships and Ford corporate with no response. This extension of warranty was 10 years or 150,000 mile. I purchased the vehicle January 2014 as a new car.
The contact owns a 2013 Ford Edge. The contact stated while driving at an undisclosed speed, the brake pedal was depressed, and the vehicle made an abnormal sound. Additionally, the contact stated that while driving at an undisclosed speed, the vehicle stalled. The vehicle was taken to the dealer, who informed the contact that the brake booster needed to be replaced. The contact related the failure to Technical Service Bulletin: 13N02 (Brake Booster). The manufacturer was made aware of the failure and referred the contact to file a complaint with the federal safety agency Hotline. The failure mileage was approximately 113,600.
The contact owns a 2013 Ford Edge. The contact stated while driving 30-35 MPH and depressing the brake pedal, the brake pedal was hissing. The contact stated that she applied more pressure to the brake pedal to stop the vehicle. The contact stated that the failure had been recurring while driving. The vehicle was taken to an independent mechanic, where it was diagnosed that the brake booster needed to be replaced. The vehicle was not repaired. The dealer was notified of the failure. The manufacturer was notified of the failure and referred the contact to the federal safety agency Hotline for assistance. The failure mileage was approximately 114,650. The contact stated the brake booster has failed and is now having the engine to stall.
The contact owns a 2013 Ford Edge. The contact stated that while stopped at a traffic light, there was an abnormal hissing sound coming from the vehicle. The contact stated that the brake pedal was depressed and went to the floorboard. The contact released the brake pedal, and the power brake functionality would return. The contact stated that the brake failure had become a recurring failure. The contact stated no warning light was illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The contact researched online and related the failure to Manufacturer Customer Satisfaction Program: 13N02 - Extended Warranty Brake Booster (Service Brakes, Hydraulic). The contact stated that the vehicle was no longer under warranty coverage. The manufacturer had been informed of the failure. The failure mileage was approximately 75,000.
* Brake booster failure. * Ford posted a letter dated 1/9/14; it’s a Customer Satisfaction Program (CSP) 13N02 for “certain” 2010-2013 Edge and MKX vehicles; an extended warranty coverage for brake boosters. * Vehicles covered; “certain” vehicles built at the Oakville Assembly Plant from 5/3/10-3/28/13. * The program extends the coverage of the brake booster to 10 years of service or 150,000 miles from the warranty start date of the vehicle, whichever occurs first; it is a one time repair program. * Reason for additional coverage; brake booster may develop a small tear in the diaphragm; if this happens there is a “hissing” noise when the brake pedal is depressed and there is also a “spongy” pedal feel. * Service action; dealers will replace the brake booster at no charge. Details about my 2013 Edge: * It was built in Nov 2013 at the Louisville Assembly Plant. * I purchased it in April 2014; a little over 9 years ago. * It has almost 77,200 miles. * My brake booster has a “hissing” noise and a “spongy” pedal. Why does this CSP extended warranty only cover vehicles built at the Oakville Plant and not other plants? I “assume” my Edge has the same brake booster in it as the ones built in Oakville. That’s the only reason mine is not covered. Ford obviously knows they had problems with these brake boosters but only provided the extended warranty to vehicles built at the Oakville Plant. Why? I think it should cover ALL brake boosters from the manufacturer who made the ones for Oakville regardless of where the vehicle was built. What difference does it make where a vehicle was built if it has a defective brake booster? Please review and assess the situation and advise at your earliest convenience. Thank you. Ernest Franklin (Frank) Burdette Jr. 2061 Wilkerson Road Ringgold, VA 24586 [email protected] 434‑489‑6045
I am having problems once again with my brake booster...I had to have it replaced twice so far in the last 2 years. And now i suddenly have to push much harder on my brakes to stop my car & therefore have it repaired or replaced, yet again.
While driving on 2 lane highway coming to a Stop sign, brake pedal depressed all the way to the floor without fully stopping vehicle. There was a hissing sound when depressing the pedal. Had to implement the emergency parking brake in order to stop completely. There were no warning lights and this has not happened before. I drove it home with hazard lights on and at every stop I pumped the brakes, heard the hissing sound but pedal goes to floor. When got home I checked brake fluid reservoir, it was full. I do not see any fluid leaks on driveway. I checked a Ford forum and see many incidents like this described, too many. Apparently this is a known issue by Ford and there is a TSB 13N02 (brake booster). This could have been a horrible incident if there had been other cars in the intersection.
I have a 2013 ford edge and I was driving at 40=45 mph and when I came up to a light the brake peddle went to the floor and was very hard to stop. The result was me having to leave the road to the right to avoid a collision. I took it to ford who stated it needed a brake booster and said my vehicle doesn't qualify for an extended warranty on the booster. Car had 88k miles at time of incident.prior to the incident no lights or signs. After this I hear a loud hissing noise from under dash.
The contact owns a 2013 Ford Edge. The contact stated while driving 30-40 MPH and making a turn, the brake pedal was depressed and went down to the floorboard, and the vehicle hesitated to respond. The contact stated that the failure recurred while driving. There was no warning light illuminated. The dealer was notified of the failure and referred the contact to the manufacturer for assistance. The vehicle was not diagnosed nor repaired. The manufacturer was notified of the failure and informed the contact that the vehicle could not be covered under Ford Service Campaign Number: 13N02 because the campaign had expired. The failure mileage was approximately 86,000.
When I hit a pot hole or bump I have no brakes. They go all the way to the floor. My mechanic will not touch them due to brake failure on all the Ford edges. I was told To contact you.
Since first purchasing the vehicle from Larry H. Ford in Mesa, AZ in 2019 and returning it for repair due to inoperable brakes, the issue has returned time and time again. It is now happening again where I either have to either press the brake peddle completely to the floor or the vehicle will not come to a complete stop at all. This has become extremely costly and I would like to know if this is an issue specifically associated with the 2013 Ford Edge and find some resolve.
Brake vacuum pressure system went out. Only 101k miles and 10 years old......
The contact owns a 2013 Ford Edge. The contact stated that while approaching a red traffic light, the brake pedal was depressed and went to the floorboard. The vehicle failed to come to an immediate stop and instead coasted at a low speed. The contact turned off the vehicle and the vehicle come to a complete stop. The vehicle was taken to a certified mechanic who replaced the rotors and brake pads. The contact stated that after the repairs the brakes started to lock-up. The service stabili-trac, stability failure, and other warning lights were illuminated. The vehicle was returned to the certified mechanic who replaced the brake booster and brake master cylinder. The failure persisted. The manufacturer was not made aware of the failure. The approximate failure mileage was 195,582.
The abs module has gone bad numerous times and is in a shop again for the third time in two month. I've havent been able to drive my car for two months at first it was the master cylinder and then the abs unit and then the brake booster and now the new abs unit again! After extensive research my husband and I found that this is very common in my vechile model but not enough cars to be issued a recall. Which I think is a massive safety issue because your brakes are very important. If your brakes fail you, you could not only injure yourself and your passengers but others around you. Right now my vehicle is at my local ford dealership and they also agree that this is a very common problem and ford isn't recalling them and making customers pay thousands of dollars for the new part and service. I was even told some times you don't get a working abs unit and have to keep going through the service part warranty until you get a good one. Which I feel causes more lost time with my vehicle staying in the shop until I get a good one.
when was driving pushed the brakes and it went straight to floor almost causing me to rear end the car in front of me. dealer said said it is the booster. no police or manufacturer inspection. no warning lights or any other symptoms
I was driving on the highway and someone rapidly stopped in front of me. When I went to push my brakes, my brake pedal with straight to the floor and the car would not stop, almost causing a collision with the car in front of me. Brake system failed, no warning lights. This has been an known issue with this car for others but still no recall.
The contact owns a 2013 Ford Edge. The contact stated that while driving at an undisclosed speed and approaching a stop light, the brake pedal was depressed but was extremely firm. The brakes failed to respond as needed. The driver placed both feet on the brake pedal and the vehicle stopped. The contact pulled over, and her husband drove the vehicle to the residence. The contact stated that while her husband was driving at an undisclosed speed, the failure recurred. There were no warning lights illuminated. The vehicle was taken to the local dealer where it was diagnosed that the brake booster needed to be replaced. The vehicle was repaired. The manufacturer was contacted but no assistance was provided. The approximate failure mileage was 151,049.
Three times over the past month I have experienced a soft brake pedal that would go all the way to the floor and the vehicle would fail to stop normally. The first two (2) times where at low speed approaching a gas pump. More frighteningly the third time was at 45 MPH with my young daughter in the vehicle and evasive maneuvers had to be mad to avaoid a collision. After the first time I had the brake pads changed. Earlier on the day of the third incident my vehicle was at a national service center for a brake inspection, because of the alarm from the second incident, and no issue was found. The issue is completely random with no noise, dash lights, warning, or indication of impending failure at all. I have read multiple accounts of 2013 Ford Edge drivers with accounts matching mine detail for detail. Reports of multiple brake booster and master cylinder replacements and HCU replacements with no success. This is extremely dangerous and will eventually result in the loss of life for someone. This needs to be addressed by Ford via recall immediately.
With no warning lights or other apparent issues brake pressure suddenly disappeared resulting in the brake pedal sinking to the floorboard before the vehicle would even slow down or stop. This first happened in September 2022. The issue can better be described in both the federal safety agency Complaints 11339440 and 11343191. The brake master cylinder was replaced. It worked until May 2023 and I am now having the same issue. There is almost no brake pressure. The problem has yet to be resolved. This is a very serious safety risk for both the passengers of this vehicle and others on the road. It is almost impossible to come to a full stop within a few seconds.
The contact’s daughter owns a 2013 Ford Edge. The contact stated that while his daughter was driving at an undisclosed speed, his daughter had to apply added pressure to the brake pedal to coast the vehicle to a stop. No warning lights were illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the vacuum pump and brake booster had failed and needed to be replaced. The vehicle was not repaired. The dealer was notified of the failure and the contact was provided an estimate for the repair. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in Customer Satisfaction Program Number: 13N02. The failure mileage was approximately 48,000.
The brakes failed to function with no warning whatsoever! The pedal immediately went to the floor with no result. This would have cause an accident had we not been on an empty road with no traffic. The vehicle is available for inspection. The is a HUGE risk to the safety of my family and other drivers and pedestrians who might be struck by a vehicle that cannot stop. This can definitely result in severe injuries or death. The vehicle was taken to a repair shop where the problem could not be duplicated, even though they tried by slowly driving the vehicle for 2 days. For precautions sake, the rotors and pads were replaced and the brake system components checked and fluid bled. We then took the vehicle back and drove it for about a week in various traffic situations without incident. Today, the same failure occurred. By shear grace of God, we were on a road with no traffic again! I have now been reading all the reports on this the federal safety agency site and am extremely concerned that the federal safety agency has not forced a recall. This is clearly a repetitive and frequent issue. with Ford Edge vehicles! DO SOMETHING NOW BEFORE SOMEONE DIES OR IS SERIOUSLY INJURED. There were no warning lamps, messages or other symptoms of the problem prior to the failure. This first appeared April, 2023.
My 2013 Ford Edge is making a hissing noise when the brakes are applied. It has been a few months; I’ve tried to brush it off that it was just my imagination because my brakes are working (for now), there is nothing leaking, but now there is also a jerk feeling. As I’m driving and then slow down, somewhere between 35-40 mph, there is a little jerk or “hiccup” feeling. I have noticed that sometimes the pedal feels hard to press. I’m worried what is going on will eventually cause my brakes to fail and cause injury. Nothing has been inspected yet, but I did research and see that there is a recall for this exact problem. However, I have not received anything in the mail regarding this. I looked up my VIN and found there are 0 recalls for my vehicle. I believe that my vehicle should be included in this recall.
We began experiencing a "hissing" noise when the brake pedal was depressed. Additionally, the pedal feels stiff, and occasionally the brakes will not engage at all without significant pressure being applied to the brake pedal. We took the vehicle to a Ford dealership, they ran diagnostics, and they confirmed that the brake booster is failing. We discovered that this was a known issue with 2013 Ford Edge vehicles. Ford has a Customer Satisfaction Program (13N02) that was published in its TSB (SB-10054925-6246). This CSP recommends that the brake booster be repaired and extends warranty coverage of the part for certain "2010-2013 model year Edge and MKX vehicles built at the Oakville Assembly Plant from May 3, 2010 through March 28, 2013." I have been told by Ford Motor Company that my vehicle is not covered under this CSP because its VIN was not identified as being affected and, while it was made at Oakville, it was made in November of 2013. Therefore, according to Ford, they are not liable to cover the part replacement despite the fact that the issue we're having is the same issue that Ford has identified in other vehicles of the same make, model year, and built at the same assembly plant.
The contact owns a 2013 Ford Edge. The contact stated while driving 45 MPH and depressing the brake pedal, the contact heard air coming from the brake pedal. The contact stated that the low brake air pressure warning light was illuminated. The contact stated that after pumping the brake pedal several timed the vehicle came to a complete stop. The vehicle was taken to an independent mechanic and the mechanic stated that the brake booster needed to be replaced. The vehicle was not repaired. The dealer was contacted but provide no assistance. The manufacturer was contacted, and the manufacturer stated that the vehicle was out of warranty. The contact was referred to the federal safety agency Hotline for assistance. The failure mileage was 257,000.
I had my brakes repaired and since having my brakes repaired, I continued to have issues with the suspension, vehicle handling and imbalance (vehicle not stopping properly). I was dropping my friend girl's grandsons off at school and my brakes went out...almost causing me to have a head on collision with the vehicle in front of me. I was overwhelmed and hysterical! I had taken my vehicle back to the repair shop that replaced my brakes and I tried to explain what happened. I was bewildered because my vehicle didn't have any warning messages of any sort. I remember riding over some bumpy streets and when the traffic slowed down, I pressed my brakes and they were gone. I had to press the brake pedal all the way down to the floor and I wasn't getting any pressure through the brake line at all, which caused me to almost run into the vehicle in front of me. When I pressed the brake to the floor, my vehicle slid rapidly and made a strange noise before I was able to come to a complete stop. We were terrified because I had ran into the curb trying to stop my vehicle! The repair shop mechanic stated that it could be the caliber connected to the brake line, because my vehicle did not have sweaking noises that you usually hear when your brakes need to be replaced. My vehicle is still in need of repairs, I'm afraid while driving it still. I'm bewildered because I honestly don't know what caused my brakes to just go out like that!
Brake pedal goes to the floor when you press on the breaks and you hear a sound as it happens
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 Ford Edge?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history