The contact owns a 2015 Ford Edge. The contact received notification of the federal safety agency Campaign Number: 25V544000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted and stated that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.
2015 Ford Edge brakes problems
133 complaints (18% of all complaints for this car). Typical mileage when it fails: 88,000. 5 crashes reported.
- owner complaints
- 133
- of this car's complaints
- 18%
- typical mileage
- 88,000
- crashes
- 5
- recalls
- 2
Which part fails
- Power assist: hydraulic: hoses, lines/piping, and fittings1
- Pedals and linkages1
- Foundation components: hoses, lines/piping, and fittings1
At what mileage
Complaints by mileage at the time of the problem.
0k-25k
25k-50k
50k-75k
75k-100k
100k-125k
125k-150k
150k-175k
175k-200k
200k+
Ford Edge brakes problems in other years
Specific symptoms reported on the 2015 Ford Edge brakes
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- Ford Motor Company (Ford) is recalling certain 2016-2018 Lincoln MKX and 2015-2018 Edge vehicles. The rear brake jounce hose may rupture and leak brake fluid.
- Risk
- A brake fluid leak can extend the distance required to stop the vehicle, increasing the risk of a crash.
- Remedy
- Dealers will inspect and replace the brake jounce hoses and adjust brake jounce hoses with no damage present, free of charge. Owner notification letters were mailed September 17, 2026. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 25S87.
Recall number 25V544000 · Recall details
Service brakes
- What is wrong
- Ford Motor Company (Ford) is recalling certain 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The front brake hoses may rupture prematurely.
- Risk
- A ruptured front brake hose will cause a brake fluid leak, lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
- Remedy
- Ford will notify owners, and dealers will replace the front brake hoses with the new hoses that have a revised braid material, free of charge. Owner notification letters were mailed on May 13, 2021. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 20S42.
Recall number 20V469000 · Recall details
Related investigations
Loss of braking caused by rear brake hose failure
On October 3, 2024, the federal safety agency’s Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate instances of rear brake hose ruptures causing a sudden and unexpected loss of braking in model year (MY) 2015-2017 Ford Edge vehicles manufactured by Ford Motor Company. The complaints allege that, without warning, the vehicle lost its ability to brake causing an unanticipated increase in the vehicle’s stopping distance. The complaints also allege that, prior to the rear brake hose rupture event, the vehicle had been serviced under recall 20V‑469. Recall 20V469 involved MY 2015-2018 Ford Edge and MY 2016-2018 Lincoln MKX vehicles which may experience front brake hose ruptures causing increased brake pedal travel and a reduction in the rate of deceleration. Ford identified the cause of this safety defect as a consistent localized failure of the internal reinforcement braid of the brake hose due to cyclic fatigue via tensile/bending and torsional inputs during suspension and steering articulations. Ford also identified that only 88% of suspension articulation was utilized on the front brake hose test rig during life cycle testing. These findings, along with ODI’s identification of an emerging trend involving rear brake hose ruptures, prompted the opening of this investigation. ODI identified 64 Vehicle Owners Questionnaires related to this investigation, 2 involving a crash. These consumers were interviewed and reported experiencing sudden loss of braking ability while traveling at low and highway speeds without any prior warning such as a “low brake fluid” warning indicator. Consumers reported that, as they tried to stop their vehicle, the brake pedal traveling to the floorboard and the vehicle required more stopping distance than anticipated or considered normal. Consumers also observed brake fluid present on the rear tires and roadway near the rear tires immediately after the incident. Some consumers provided photographs of the rear brake hose ruptures which depicted a similar rupture pattern and location (near the crimp on the dynamic section of the brake hose). 1 photograph showed an installation alignment mark pulled out near the crimp suggesting exposure to unanticipated tensile forces pulling the hose away from the crimp. During this investigation, Ford responded to Information Request Letters detailing information such as warranty claim data, brake hose specifications and engineering drawings, production part changes logs, and Ford’s assessments of potential root cause. Ford reported that the front and rear brake jounce hoses equipped on the subject vehicle population utilized the same construction and material. Therefore, Ford’s analysis consisted of a comparison between the front and rear hoses demonstrating that the rear hose bend radii in full jounce and full rebound were larger than the front hose. Ford also described that the two hoses are exposed to different loading environments as the rear brake hose is exposed to suspension inputs only, while the front hose is exposed to both suspension and steering inputs; thus, the rear hose is subjected to lower tension and fatigue loads. However, it is important to point out that larger bend radii alone do not necessarily mean a brake hose can withstand the dynamic loading requirements of a brake hose (as discussed earlier, the defect identified in the front brake hoses were attributed to the hose material). Rear brake hose failures were identified through exemplar vehicle and parts inspections conducted by the federal safety agency’s Vehicle Research and Testing Center. Ford stated that its investigation did not identify any specific or common root cause for this safety defect, and that brake hoses can fail for many reasons including contact with road debris, improper vehicle servicing, and fatigue, as well as vehicle age and miles in service. Based on its assessment of failure rates and warranty claims, Ford concluded that the rear brake hose ruptures did not present an unreasonable risk to motor vehicle safety because consumers would experience a progressive leak accompanied by a red brake warning indicator within the instrument panel and would not experience a total loss of braking due to the diagonally split brake system. Note that these assessments are contrary to the consumer experiences described above. As previously described, consumers described a sudden, unexpected loss of braking ability with no prior warning in their instrument cluster (not a progressive leak) and an increase in anticipated vehicle stopping distance (presenting an unreasonable risk to motor vehicle safety). ODI conveyed these perspectives and investigative findings to Ford during a technical discussion on July 23, 2025. On August 22, 2025, Ford submittedrecall 25V‑544 which included MY 2015-2018 Ford Edge and MY 2016-2018 Lincoln MKX vehicles, for a total recall population of 499,129 vehicles. As described in the Part 573, in September 2024, Ford concluded that this concern did not present an unreasonable risk to motor vehicle safety and closed its investigation into allegations involving rear brake jounce hose ruptures within this vehicle population. Ford reopened this investigation in July 2025 following the technical discussion with ODI referenced above. Ford identified the safety defect as a rupture of the rear brake jounce hose resulting in an increase in pedal travel and increase in vehicle stopping distance elevating the risk of a crash. To date, Ford has not fully determined the root cause of this safety defect and is currently working to develop a remedy program. In view of the recall action taken by Ford, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to
PE24027
What 2015 Ford Edge owners say
Most recent owner complaints, unedited.
My 2015 Ford Edge Titanium (VIN provided) suffered a catastrophic engine failure at 85,475 miles requiring a Ford long block replacement. After driving only 53,000 miles on the new corporate engine component, the vehicle began shaking violently and suffered a sudden, dangerous loss of power while driving, rendering it completely inoperable (it is sitting in my driveway unable to be driven). The vehicle threw critical fault codes P050B (Cold Start Ignition Timing) and P061B (Internal Control Module Torque Calculation Performance). Diagnostics indicate a terminal internal failure of the timing chain or torque converter. This vehicle has a severe, documented history of manufacturing and safety defects, including catalyst monitor sensor failure 08/23/16, fan relay failure 11/20/18, purge valve failure 02/27/21, a total loss of brakes while driving on 02/15/22 due to a rear caliper failure, a faulty throttle body on 03/06/22, and an incorrectly installed engine wiring harness by the dealership when engine was replaced. This list is not all inclusive. I have a 1.5" binder of repairs and services dating back to purchase date which are too numerous to attach. This failure directly mirrors the engine defect patterns currently being evaluated under the federal safety agency Defect Petition DP26008 / ODI 11754989.
The contact owns a 2015 Ford Edge. The contact stated that while reversing at approximately 5 MPH, the rear-view camera became darkened. No warning lights were illuminated. The contact received notifications of the federal safety agency Campaign Numbers: 25V572000 (Back Over Prevention) and 25V544000 (Service Brakes, Hydraulic); however, the parts to do the recall repairs were not yet available. The local dealer was contacted and confirmed that the remedy was not yet available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the failure. The failure mileage was unknown.
Look like a year and there is still no remedy
See attached document for complaint.
The contact owns a 2015 Ford Edge. The contact recieved notice of the federal safety agency Campaign Number:Â 25V544000 (Service Brakes, Hydraulic). The contact stated that while waiting for a community get to open, and the brake pedal was depressed, the brake pedal floored and the brake warning light illuminated. The vehicle was carefully taken to the residence via back roads and parked. The vehicle was then taken to a dealer where it was diagnosed that the rear brake hose would be the only part replaced. The vehicle was not repaired as of yet. The manufacturer was not notified of of yet. The failure milage was approximately 83,000.
The contact owns a 20115 Ford Edge. The contact received a recall notification, the federal safety agency Campaign Number: 25V544000 (Service Brakes, Hydraulic) however the parts were unavailable. The dealer was contacted, however the contact was informed that the parts would be available September 2026. The contact stated that the vehicle was unsafe because of the unrepaired recall repair. In addition, the contact stated that the vehicle was used for daily transportation, and the vehicle was unsafe when traveling up and down hills. The manufacturer was contacted, and confirmed that the parts would be available September 2026. The contact had not experienced any failure regarding the unrepaired recall repair.
See attached document for complaint.
The contact owns a .2015 Ford Edge The contact received notification of the federal safety agency Campaign Number 25V544000 (Service Brakes, Hydraulic);however, the part to do the recall repair was not yet available. The local dealer was/was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was/was not made aware of the issue. The contact had not experienced a failure. The VIN was invalid./The VIN was not available.
The contact owns a 2015 Ford Edge. The contact received notification of the federal safety agency Campaign Number: ( ); however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced the failure.
Questions about the 2015 Ford Edge brakes
Does the 2015 Ford Edge have brakes problems?
Owners have filed 133 complaints about the brakes of the 2015 Ford Edge, 18% of all its complaints.
At what mileage do 2015 Ford Edge brakes problems start?
The typical (median) mileage in owner complaints is 88,000 miles.
Was there a recall on the 2015 Ford Edge brakes?
Yes, 2 recalls: 25V544000, 20V469000. Check your VIN to see if your car still needs the free repair.
What year does the Ford Edge have bad brakes?
The Ford Edge model years with the most brakes complaints are 2013 (634 complaints), 2011 (308 complaints) and 2012 (273 complaints).
Other 2015 Ford Edge problems
Engine 214Transmission 118Visibility 54Electrical 53Body 51Driver assistance 49Steering 41Fuel system 31Acceleration 30Wheels 23Airbags 10Lights 9Seats 6Locks 5Seat belts 4Suspension 2Tires 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2015 Ford Edge?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history