Ford Excursion recalls

What is wrong

Ford is recalling certain model year 2011 ranger trucks built from january 25, 2011, through april 25, 2011 at the twin cities assembly plant, and service parts distributed to dealers for certain 2004 through 2011 model year ranger trucks, 2002 through 2005 model year excursion vehicles, and 2002 through 2007 model year f-250, f-350, f-450, and f-550 trucks for failing to comply with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." the multi-function switch was shipped with a subcomponent (slider) that may experience deformation. A multi-function switch with a deformed slider may malfunction causing the turn signal, tail lights, hazard warning signal flashers and/or brake lights not to activate.

Risk

Non-functioning lights could increase the risk of a crash.

Remedy

Dealers will replace the switches free of charge. The safety recall began on august 15, 2011. Owners may contact ford motor company customer relationship center at 1‑866‑436‑7332.

Recall number 11V352000 · Recall details

What is wrong

Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 f-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). The scds may leak internally and then overheat, smoke, or burn.

Risk

A vehicle fire could occur with or without the engine running.

Remedy

Ford will notify owners that dealers will install a fused wiring harness in line with the scds. On 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the ABS control module connector and repair as necessary. Repairs will be completed free of charge. The safety recall began on october 27, 2009. Owners may contact ford at 1‑888‑222‑2751.

Recall number 09V399000 · Recall details

What is wrong

On certain heavy duty trucks equipped with 7.3l diesel engines, the camshaft position sensor located on the engine of the vehicle may function intermittently, possibly resulting in an engine stall.

Risk

In the event of an engine stall, a crash could result without warning.

Remedy

Dealers will inspect the sensor and replace it with an improved camshaft position sensor free of charge. The recall began on december 29, 2007. Owners may contact ford at 1‑866‑436‑7332.

Recall number 07V553000 · Recall details

What is wrong

On certain trucks equipped with speed control, gasoline or natural gas engines, the speed control deactivation switch may overheat.

Risk

Overheating could result in smoke, burn, or an underhood fire.

Remedy

Dealers will install a fused wiring harness into the speed control system free of charge. The recall began on march 12, 2007. Owners may contact ford at 1‑800‑392‑3673. (note: also see recalls 05v017, 05v388, and 06v286)

Recall number 07V078000 · Recall details

What is wrong

On certain trucks equipped with speed control, gasoline or natural gas engines, the speed control deactivation switch may overheat.

Risk

Overheating could result in smoke or burn and an underhood fire.

Remedy

Dealers will install a fused wiring harness into the speed control system free of charge. The recall began on august 7, 2006. Owners may contact ford at 1‑866‑436‑7332. (note: also see recalls 05v017 and 05v388)

Recall number 06V286000 · Recall details

What is wrong

Certain pickup trucks, sport utility vehicles and vans equipped with 6.0l diesel engines may experience stalling without warning while driving and may or may not restart.

Risk

Should the engine stall, a vehicle crash could occur.

Remedy

Dealers will upgrade the fuel injection control module (ficm) wire harness or replaced, and/or have a new injection control pressure (icp)) sensor connector installed free of charge. The recall began on july 22, 2005. Owners may contact ford at 1‑800‑392‑3673.

Recall number 05V270000 · Recall details

What is wrong

On certain pickup trucks and sport utility vehicles equipped with 6.0l diesel engines, the engine ground stud that attaches the negative battery terminal eyelet to the engine block may be loose.

Risk

If the ground wire is loose, electrical current may flow to the radio suppression strap causing it to heat and potentially melt or ignite adjacent components which could result in a fire.

Remedy

Dealers will replace the engine ground stud and the radio suppression strap and adjacent components will be inspected for damage and replaced, if necessary. The recall began on july 23, 2004. Owners should contact ford at 1‑800‑392‑3673.

Recall number 04V327000 · Recall details

What is wrong

Vehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. A switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ice obstructs the blades from returning to the "parked" position at the bottom of the windshield. These vehicles were built at the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.

Risk

Loss of visibility while driving increases the risk of a crash.

Remedy

Dealers will inspect the date code on the wiper motor. Motors built with the suspect time frame will have the wiper motor gear case cover replaced. Owner notification began august 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1‑866‑436‑7332.

Recall number 01V258000 · Recall details

What is wrong

Vehicle description: passenger and sport utility vehicles, pickup trucks, and minivans. Equipped with seat belts supplied by trw. It is possible that the driver's and/or front passenger's outboard seat belt buckle may not fully latch. Ford crown victoria built at st. Thomas assembly plant from 4/17/00 - 5/29/01 mercury grand marquis built at st. Thomas assembly plant from 4/17/00 - 5/29/01. Lincoln town cars built at wixom assembly plant from 3/27/00 - 5/30/01. Lincoln navigators built at michigan truck plant from 4/11/00 - 5/31/01. Ford windstars built at oakville assembly plant from 3/23/00 - 5/30/01. Ford rangers built at twin cities plant from 3/28/00 - 5/30/01, and also at the edison plant from 3/13/00 - 5/25/01. Ford f-150 truck built at norfolk plant from 4/18/00 - 5/25/00; at ontario plant from 5/10/00 - 5/28/01; at kansas city plant from 9/11/99 - 5/25/01; and at cuautitlan plant from 5/16/00 - 6/9/01. Ford super duty f-250, f-350, f-450, and f-550 trucks built at kentucky plant from 4/17/00 - 5/27/01; and at cuautitlan plant from 5/16/00 - 6/19/01. Ford excursions built at kentucky plant from 4/17/00 - 10/2/00. Ford expeditions built at michigan truck plant from 4/11/00 - 5/31/01.

Risk

In the event of a crash, the restraint system may not provide adequate occupant protection, increasing the risk of personal injury to the seat occupant.

Remedy

Dealers will inspect the front outboard seat belt buckles and if the buckle fails the inspection process, it will be replaced. Owner notification began july 25, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1‑866‑436‑7332.

Recall number 01V227001 · Recall details

What is wrong

Vehicle description: passenger and sport utility vehicles. The inflator canister in the driver air bag module may have an inadequate weld near the igniter.

Risk

In the event of a vehicle crash, the driver air bag may not deploy as intended, potentially resulting in reduced occupant protection, or a burn injury.

Remedy

Dealers will install a driver air bag module. Owner notification began march 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1‑800‑392‑3673.

Recall number 01V082000 · Recall details

What is wrong

Vehicle description: passenger and sport utility vehicles. Due to the use of incorrect material by a supplier, the headlamp switch knob can fracture and separate from the headlamp switch.

Risk

This would cause difficulty for the driver to activate the headlamps, which could affect driver visibility, increasing the risk of a crash.

Remedy

Dealers will replace the headlamp switch knob. Owner notification began april 9, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1‑800‑392‑3673.

Recall number 01V075000 · Recall details