Ford F-150 Hybrid slipping problems

Filed Oct 23, 2026 · TX

Formal Financial Assistance Statement RE: Goodwill Cost-Share Request for 2021 F-150 King Ranch VIN: [XXX] Current Mileage: 119,000 miles Diagnostic Trouble Codes: P2704, P07E6, P2886, P2885 Dealer Repair Quote: $9,820.50 (Full Internal Transmission Replacement) To Whom It May Concern at Ford Motor Company and Dealer Leadership: I am formally requesting a corporate Goodwill Cost-Share for the catastrophic internal transmission failure on my 2021 F-150 King Ranch. While this vehicle is slightly past its 100,000-mile powertrain coverage, a total mechanical failure on a top-tier luxury vehicle at this stage—caused by well-documented, inherent factory defects—is entirely unacceptable. The diagnosis and fault codes pulled by the certified mechanic map directly to systemic, factory-recognized hardware flaws in the 10R80 10-speed transmission: 1. The Core Mechanical Failure (TSB 24-2209 / TSB 23-2250): My truck exhibits severe gear slippage and loud internal clunking, triggering code P2704 (Friction Element E Apply Time). As documented heavily by Ford’s own service network, this code is the direct result of a design flaw where the internal CDF clutch drum bushing migrates out of place under heat, slicing internal seals and destroying line pressure (triggering pressure codes P2885 and P2886). 2. The Safety Concern (Code P07E6): My transmission has also thrown code P07E6 (Unable to Engage Park), which directly mirrors the mechanical components Ford is actively tracking for transmission parking pawl issues. Ford Motor Company has issued multiple Technical Service Bulletins acknowledging this exact failure sequence and has since redesigned the CDF drum assembly to correct the manufacturing flaw. I should not be held solely responsible for a $9,820.50 repair bill caused by a component that Ford has publicly acknowledged was defectively designed from the factory. As a loyal Ford customer driving a premium vehicle, I expect Ford to stand behind its product. I am req INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION

Filed Oct 2, 2026 · Driver assistance, Engine · SC

I have a 2026 F150 3.5L Twin-turbo ECOBOOST Hybrid King Ranch. I have experienced the following behaviors: (1) rough transitions when climbing grades; (2) rough transitions when braking hard/coming down grades; (3) 10-speed transmission - electric motor slippage during de-accerelation (especially when Adapted Cruise is activated); (4) transmission seems to have gear hunting at low speeds/stop and go; and (5) harsh shifts/unpredictable downshifting with adaptive cruise. I purchased this f150 since Ford advertised the Eco-Powerboost Hybrid/10-speed transmission was built for heavy duty hauling/towing. In my mind, heat is the silent killer of hybrid long-term reliability and longevity (I live in SC - a hot climate). In my mind, I feel this electric-gas powertrain guesses my driving habits instead of responding to my driving habits.

Filed Aug 21, 2026 · Transmission · FL

I am reporting a safety-related transmission problem I'm experiencing with my 2022 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly shakes violently downshifting from 6th to 5th gear and during upshifting from 2nd to 3rd gear. This occurs every single time while accelerating or braking, only in different gears , creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or deceleration. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Also because this violent shaking startles the driver (lot of times it feels like the truck was hit by another car) and can provoke dangerous breaking. This shaking started in April and has not stopped ever since. Because I'm personally experiencing these unexpected transmission events, as well as my wife, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 3, 2026 · Transmission · TX

I am reporting a safety-related transmission problem I experienced with my 2022 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission FAILS TO ENGAGE AT SLOW SPEEDS, THROTTLE WILL NOT RESPOND FOR UP TO 8 SECONDS This creates a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or propulsion. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 3, 2026 · Acceleration, Brakes · TX

I am reporting a safety-related transmission problem I experienced with my 2023 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly does not accelerate for up to 3 seconds while pressing the gas pedal, brakes either harshly or too soft at varying times, and very irregularly. This occurred while accelerating onto the highway, and almost every time I am braking at a stop sign or light, creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration, propulsion, or deceleration. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, traveling at highway speeds, slowing down, and stopping, can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 2, 2026 · Transmission · CA

I am reporting a safety-related transmission problem I experienced with my 2021 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly has lost propulsion and RPMs flare while driving steadily uphill. This occurred while merging onto a fast moving highway and while traveling at a steady speed going uphill, creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or propulsion. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 2, 2026 · Engine, Fuel system · AL

I am reporting a safety-related transmission problem I experienced with my 2021 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly shifts hard/lags on gears 3-5 and sometime higher gears 7-9 at higher speeds. I’ve also noticed a buzzing/metallic rattling coming near the engine from inside. There is also times i can tell i have no power when trying to speed up and the other day i almost thought i was going to get T-Boned. This occurred while on my daily traffic commute to work, creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or propulsion. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 1, 2026 · Transmission · GA

I am reporting a safety-related transmission problem I experienced with my 2021 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly slipped at least twice, and shifts violently often. The truck while driving on a 35mph road after just going over a railroad track I went to accelerate and lost gear and the transmission slipped really bad and violently caught a gear after reaching around 4000 rpm. The truck also shifts violently when under moderate acceleration at almost all times in gears 2-5 creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or propulsion. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This condition can result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder/sleeve condition in Ford F-150s. Please review Ford warranty claims, dealer repair records, transmission replacements, consumer complaints, and field-failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed.

Filed Aug 1, 2026 · Transmission · TN

I'm reporting a transmission problem on my 2021 Ford F-150 with the 10R80 automatic transmission that I believe is a safety issue, not just a reliability one. The truck currently has about 55,000 miles on it. Right now the truck shifts hard and jerks every time I drive it, and it's especially bad at low speed. The worst situation is creeping through a parking lot looking for a spot, the transmission drops down into first with a clunk and a jerk, and then kicks again when it shifts back up out of first. It's rough enough that I've taken to putting the truck in "Eco" drive mode on purpose, because that softens the shift profile and takes a little of the edge off. Once I'm out of the low-speed stop-and-go and up to normal road speed, it seems to smooth out and drive okay, but the low-speed shifting is genuinely excessively rough. From what I've read, this matches the known 10R80 problem where the CDF clutch sleeve can move axially and cause hydraulic-circuit leaks, which leads to slipping, RPM flares, delayed or harsh engagement, and unexpected shifts. Everything I've found says this condition progressively worsens as the transmission degrades. That's exactly why I'm filing now rather than waiting. A hard, unpredictable shift or a loss of propulsion at the wrong moment — pulling into traffic, crossing an intersection, merging — can easily cause a collision. I don't want to wait until it fails in a dangerous spot and someone in my family gets hurt. I'd like the federal safety agency to investigate the 10R80 CDF clutch-cylinder/sleeve condition on Ford F-150s and to review Ford's warranty claims, dealer repair records, transmission replacements, and other owner complaints to determine whether this is a defect requiring a recall. Owners shouldn't have to wait for a dangerous failure before a known condition like this is addressed.

Filed Aug 1, 2026 · CA

I am reporting a safety-related transmission problem I experienced with my 2022 Ford F-150 equipped with the 10R80 automatic transmission. While driving normally, the transmission suddenly did not engage when I turned a corner when in 2nd gear it disengaged and I coasted to side of road safely good thing there was no traffic. I then noticed that the transmission would slip (not hard just slightly 1st-5th gears). This has happened a few times especially when I first start moving. This is creating a potentially dangerous situation because the truck did not respond as expected when I needed predictable acceleration or propulsion. I believe this incident may be related to the known 10R80 CDF clutch-cylinder/sleeve problem. Ford technical information identifies axial movement of the CDF sleeve that can cause hydraulic-circuit leaks and harsh or delayed engagement and shifting. This result in slipping, RPM flares, delayed engagement, unexpected gear changes, harsh downshifts, lurching, or loss of propulsion. This is a safety concern, not merely a transmission quality or reliability issue. Unexpected loss of propulsion or unpredictable shifting while merging, accelerating into traffic, crossing an intersection, turning, or traveling at highway speed can create a collision hazard. Because I personally experienced this unexpected transmission event, I request that the federal safety agency investigate the 10R80 CDF clutch-cylinder sleeve condition in Fords f150s. Please review Fords warranty claims, dealer repair records, transmission replacements, consumer complaints and field failure data to determine whether this is a safety defect requiring a recall. I believe owners should not have to wait for a potentially dangerous transmission failure before this known condition is addressed. Thank you [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)