Check a VIN

2001 Ford F-250 transmission complaints

Page 2 of 2: complaints 11 to 28 of 28, newest first, as owners wrote them.

See the summary of 2001 Ford F-250 transmission problems: which part fails, at what mileage and related recalls.

Filed Oct 22, 2003 · Transmission · 16,550 miles · OR

While driving uphill at 15-20 MPH the driver heard a sound coming from the transmission. The transmission shifted to neutral, then the vehicle rolled backward. After stopping, the driver was unable to shift to drive or reverse. The vehicle was towed to the dealer where a clutch mechanism inside the automatic transmission was replaced. *nlm *scc

Filed Oct 6, 2003 · Transmission · 35,800 miles · AL

Consumer said the vehicle was shifting improperly. Took vehicle to dealer, and dealer indicated that transmission needed to be replaced.

Filed Aug 22, 2003 · Transmission · 36,316 miles · CA

Automatic transmission was making a noise while driving. Vehicle was taken to the dealer,who replaced the driveline. 1200 miles later, transmission had to be replaced again.

Filed Apr 18, 2003 · Transmission · TX

While driving the vehicle the clutch broke. The dealer has replaced it three times but the problem re-occurred.

Filed Oct 8, 2002 · Transmission · MD

Consumer states that while driving can feel transmission slipping. Contacted dealer. Transmission failing. Please provide more information.

Filed Sep 7, 2002 · Transmission · TX

Previous failure (2nd) reported under odi#759329 on same subsystem -march 2002.

Filed Jul 9, 2002 · Transmission · GA

Without warning the hydraulic line from the master clutch cylinder ?term came off and rendering the clutch completely useless (pedal went to the floor and stayed there). Was luckily in a parking lot just about to pull onto a highway with a 4000 lb trailer. Realized how dangerous that could have been. Forrest cate ford in lafayette, ga says the part they are replacing it with is updated so that the line doesn't do that. This should be a recall. If that happened on the highway with zero warning, I could have had problems stopping quickly or controlling the vehicle. I was lucky but want no one else to be unlucky. Thank you.

Filed Apr 3, 2002 · Locks, Steering · CA

Consumer stated there was a squeak in the steering wheel when making turns, also the steering was hard to adjust on tilt wheel.

Filed Mar 13, 2002 · Transmission · TX

First hydraulic cylinder failure occurred (while living in fl) on 06 jun 2001 (odo: 2188 miles) at approx 30mph. Lost use of clutch while shifting between 2nd & 3rd gear. Hydraulic cylinder replaced by orville beckford ford under warranty. Second occurrence is described earlier in this report --occurred after moving to tx. To be repaired by gillespie ford, san antonio, tx.

Filed Mar 4, 2002 · Transmission · CA

While driving 55mph and hitting passing gear, vehicle went into idle, it would not accelerate. Dealer contacted. *ak consumer states recently when attempting a lane change at 70 MPH, the rpms dropped to 600, consumer pumped the accelerator twice before the engine began to accelerate again, consumer states this is an intermittent problem.

Filed Feb 8, 2002 · Transmission · MI

Transmission problem. While driving transmission burned up. Contacted dealer, and dealer was not willing to do anything.

Filed Feb 7, 2002 · Transmission · OK · fire

We had this truck into a dealership 9 days prior to the fire for what we thought were transmission problems, the dealership failed to find any problem with our truck and advised us that there was nothing that prevented us from driving it. 9 days later we were experiencing the same problems and felt the need to get another opinion so we were in route to a dealership and did not make it due to the truck failing and catching fire. Transmission fluid escaped the filler tube and went on the ehaust manifold which caused a flash fire. We were fortunate to get ourselves and our small children out of the truck in time. The dealership prior to the fire said that if we were in fact having transmission problems that we would have seen the overdrive light on the shifter column flashing, this never occurred which leads us to believe that there may be a failure in the computer of this truck that they refused to find. We pleaded with the service advisor at this dealership to investigate what could have caused the problems we were experiencing and they refused. Now we have a truck that has been at a dealership for almost 90 days and they have yet to find the cause of fire. And due to the fire ford motor company refuses to take responsibility to their product. They denied helping us and referred us to our insurance company. We have incurred a drastic financial loss due to this and fear being put back in this vehichle knowing that it could happen again, becaus the initial cause of fire has not been found. We have faught a hard fight with allstate insurance to get them to fix our truck properly to no avial. We know of others that are experiencing similar problems and we feel ford needs to pay attention to this mecahnical failure, due to faulty production of these trucks with their transmissions.

Filed Feb 1, 2002 · Transmission · NM

While traveling at highway speeds clutch became disengaged from mechanism that it was attached to. Driver could not get out of gear. Driver felt this was very unsafe. Dealer replaced master cylinder and clutch.

Filed Jan 26, 2002 · Engine, Suspension · OK · fire

Upon entering the highway, the truck suddenly started having problems, the r.p.m. Gauge started fluctuating from 1000 to 3000 r.p.m., it squealed and jerked into gear and a popping noise was coming from the right side of the front end. The dealer could not find any problem, but he suggested that it could have been the clutch fan slipping. Consumer experienced again what he felt was transmission problems but the light never flashed on the overdrive column so taking note of what was happening and continued driving. Then the light started flashing on the overdrive column, within seconds, consumer noticed a large puff of black smoke coming from under the truck, the r.p.m. Gauge went to below 1000, the truck lost all power, and the cab started filling with smoke, fire was escalating under the truck and hood. Possible engine failure. *yd

Filed Oct 16, 2001 · Brakes, Transmission · CO

Automatic fails to shift into lower gears for engine braking. When decending a steep grade the automatic transmission fails to apply. This has the same effect of putting the truck in neutral when going down hill. When driving in the mountains this is extremely dangerous in that it requires the brakes to do the work of slowing the truck. If the brakes overheat then the truck will "run away".

Filed Jul 10, 2001 · Transmission · FL

From the beginnig there was trouble when starting the engine (very long crank). The vehicle was serviced at least 3 times for this problem and was never solved. Then a few months later, while driving at a speed of about 70 MPH, the entire system shut off (engine, electric, everything) and after a few terrifying seconds it would all kick back on. When the engine kicked back on there was a major jolt to the engine (and to the passengers). This happened several times even after the truck was taken in for servicing to "correct" the problem. Lastly, while returning home from vacation, we noticed that the truck was shifting hard, lunging rather than shifting smoothly. After stopping for a toll and then proceeding the engine almost cut out and would not go passed 2nd gear. We were in a very bad section of town and there was no way in hell we were going to stop. So we drove slowly to a relatives house that was closest to where we were. We have contacted ford's customer service department in the past and were not at all satisfied with their handling of the situation. All they did was call the dealership and relay the same information we had already given them. Now we are being told that ford must put in a whole new "different" transmission, why? They must already be aware of the problem because we were told by one of their mechanics "yeah, we had a couple of other trucks come in with the same problem. They were diesels too". Hmmm.

Filed May 22, 2001 · Transmission · WI

Hose blew out of the bottom of clutch master cyclinder due to the keeper pin missing. This caused the clutch pedal to go to the floor and remain there. If there would have been an obsticle in front of the vehicle it would have been hit.

Filed Apr 3, 2001 · Transmission · WA

Clutch hose line that runs from the master cylinder down to the slave cylinder melted across the exhaust manifold thereby releasing all the hydraulic fluid, upon shifting out of overdrive due to the trailer and the grade on the freeway, the clutch pedal stayed on the floorboard of vehicle resulting in vehicle effectively being stuck in neutral.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2001 Ford F-250?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history