Dt*: the contact stated while attempting to start the vehicle the key failed to turn. The dealership determined the ignition switch needed to be replaced.
2003 Ford Focus electrical complaints
Page 16 of 19: complaints 431 to 460 of 522, newest first, as owners wrote them.
I purchased a used 2003 focus in january of 2004. The car only had about 42000 miles on it. I went to work one day and when I went to start my car the key would not turn. It gets stuck. The wheels lock and I have to jiggle it until it finally comes unstuck. I had to leave my car at work overnight once because of this and the ford dealer told me that it is a common problem but it is not a recall. This needs to be a recall. I will not pay over $200 for something that is happening to more people.
The key goes into ignition but will not turn at all to start the car. This is a continued problem. In minnesota when it is 30 below, there is no excuse to not be able to start your car and failure to do so could result in serious adverse events on consumer health. I do not feel safe traveling in the vehicle and plan to sell is very soon.
The ignition to my 2003 ford focus would not turn when the key was inserted. Was towed to dealership (family ford in netcong, nj) and they said not under warranty or is a recall and charged me $514. After this I searched on internet and see several class action lawsuits and many forums describing the same problem. I also saw statements on the forums that ford is overcharging and should go to a locksmith to get it done for under $150.
The ignition switch on our 2003 ford focus has locked up for the second time. The first incident was in a movie theatre parking lot 600 miles away from home. We had it towed to a dealership and the part replaced. The most recent took place at home last night. We haven't gotten it fixed yet.
I am the owner of a 2003 ford focus and I have several issues. In the last year I have experienced problems with the ignition locking and as well as the steering wheel, I contacted the dealer carey paul ford in decatur, ga and was told that I had to pay for repairs, which I did, after being stranded with my son. This cost me 260.00, I am a single mother and cannot afford to spend money on problems that the manufacturer clearly was aware of. The trunk on the vehicle just randomly opens at any given moment, you're riding along the road and the trunks just opens for no reason. This I find just annoying but would also like to have corrected. My latest issue is that on yesterday 04/16/06, while driving along the steering wheel just became loose and I could barely control the car, I made it to a firestone dealer that recommended that I take the vehicle to the dealer, which I will do first thing in the morning. I can't stop thinking that I or someone else on the road could have been seriously injured or killed. I can't understand how a manufacturer can continue to market a product as safe when clearly there are issues with it. I have found numerous web sites and personally spoken with focus owners with the same problems, what will it take to get ford to take responsibility for it's product. Any feedback would be greatly appreciated.
On 4/12/06, the ignition in my 2003 ford focus jammed and was unable to start I was stuck I called the tow service who had me try different ways to start my car however it didn't work. When the driver arrived he hit the key 4-5 times then it unjammed and started up after he turned the car off he had to hit the key again to start the car when we arrived at the dealer in antelope valley, ca the service req informed me the I had to pay $430 to get my car repaired I asked why hasn't the car been recall he didn't have an answer but there are several reports of the same problem with this car I like for someone to look into the problem with this car.
Dt*: the contact stated the ignition intermittently failed to turn when the key was inserted. The ignition sometimes engaged when the key was jiggled, but eventually the ignition completely locked and would not turn. The dealership determined the tumblers were bad and the ignition needed new tumblers.
I have an 03 focus with just over 40k mileage, and not even 3 years old yet, just out of warranty. This morning I tried to start the car and the key cylinder tumbler was mechanically frozen and the car would not start. I had the car towed to the dealership, paying $55.50. The dealership told me they would have to drill out the key cylinder and replace the whole unit since the tumblers froze. The dealership also mentioned they were aware of the same problem in other focuses. I believe I should not have to pay a dime and that this is purely a mechanical/warranty/recall issue. I do not know what I will have to pay for this, since the car is still in the shop, but they said I would bear a partial burden.
Ignition locking up. Key will not turn or steering unlock. This is second time I have had to replace it. Its a 2003 ford focus sedan. It has over 60k miles so no warranty. The entire ignition has to be replaced. The car has to be towed in. The side bar in the ignition fails locking it up. It will leave you stranded with no warning.
My 2003 ford focus with 38,700 miles on it recently needed to have the ignition cylinder replaced as it was corroded. I do not drive me car "hard" and follow the maintenance guide exactly. I looked online to see if other focus owners have similar problems and found dozens of unofficial complaints by other owners that their ignitions needed to be replaced when their cars had very low mileage as well. On top of this, my sister, who owns the same year and model focus as I do, also had to have her ignition replaced last year. I think ford and other focus owners should be aware of this problem and take steps to correct it. It can be very dangerous to not be able to start one's car, as happened to me. I was only lucky that I was not stranded in an unsafe area at the time.
I own a 2003 ford focus zx3 (std) with 49000 miles. The week of ~2/1/06 to 2/8/06 I began noticing that the key in the ignition was getting stuck and would require some jiggling before the key would turn in the ignition. This happened about 5-10 ten times throughout the week. On 2/8/06 I went out to my parked car and the key would not turn. I tried putting the car in/out of gear, turning the steering wheel sharply, reinserting the key, etc... The car was towed to an auto repair shop. The repair work included drilling out the broken ignition cylinder and replacing the ignition cylinder with a new one. The cost to me was $370. The tow truck operator and mechanic indicated to me that this is a common problem with the ford focus and that they have both towed and repaired quite a few of focuses for this problem.
Dt*: the contact stated when attempting to start to the engine, the ignition locked. The vehicle could not be started and a lock smith was called. The lock smith removed the old ignition and replaced it with a new one and the vehicle starts normally.
My wife's ford focus has its ignition stuck. A few months back it got stuck but I was able to get it unstuck and start the car. Since then the ignition hasn't seemed right. It is always a hassle getting the key to turn. My wife was trying to leave work one day and the key wouldn't turn. I went to help and the key never did turn. I now have to replace the tumblers inside the ignition. It seems that there are a lot of people with this same problem and even after replacing the ignition once it only last a year until they have to replace it again. It costs about $300 to replace. We ended up having to tow her car to my house where I then had to spend the money to fix it. I don't think I should have to do this if everyone is having this same problem.
Dt*: the contact stated the ignition would not turn to start the vehicle. A local independent repair shop was contacted to come inspect and repair the vehicle. The repair personnel replaced the ignition and the vehicle immediately started. Updated 03/17/06.
Dt*: the contact stated when the key was inserted into the key switch it would not turn. The vehicle was towed to a dealer for inspection. It was determined the key ignition switch needed replaced. On the first occasion the key ignition was replaced. This repaired the vehicle for a short period of time. Now the key ignition switch has failed again. The vehicle was started by an independent repair person and driven to the contacts home, where repairs are being made.
Dt*: the contact stated the ignition locked up and the vehicle was taken to the dealership. The ignition tumbler was replaced. The ignition locked up again, and the dealership determined the key needed to be replaced because they would not work with the new ignition tumbler. Also, the windshield has been replaced three times. The windshield cracked when hit by an object on the highway and overnight, with the source unknown.
Starting about 2 weeks ago (43,000 mile) the steering wheel started to lock and the key would not turn to start the car. As many have stated on their complaints and on automotivetalk.net this is a recurring problem that needs to be recalled. I have to take it in and get it replaced. From all the reading I did it will cost me between $250 and $450. There should be a recall or a law suite!
1) I have a 2003 ford focus with an ignition lock problem. The key will not turn. I understand that there are many complaints on this issue and definitely feel it is a safety concern. *nm 2) stuck out in the cold in unsafe neighborhoods. 3) must replace the cylinder at a cost of approximately $300
2003 ford focus zx3 ignition cylinder/switch locked without warning while my wife was out alone at night. I had to call and have car towed with a fee to the ford dealer. I'm sure this will cost even with the extended warranty. The tow truck driver informed me that he saw a very high number of these defects. The federal safety agency really needs to do something about ford's apparent lack of concern for their consumers!!
The cylinder lock in my 2003 ford focus has failed me twice,and I have to have it replaced again. There is a lot of complaints and there a ford servicemen that have told me this is a big problem with this car.
One day may car just didn't start, the ignition cylinder has been replaced- the car has under 49000- and it has already had several problems! The master cylinder( for the brakes) , the ignition cylinder, and several pieces have already had to be replaced on my 2003 ford focus!!! Please recall this car! The parts put in the ford focus 2003 during the manufacturing are obviously defective!!!! At the consumers expense they must replace these parts and deal with all the consequences. The ford company should take responsibility for their mistakes! Details on problems: 1- my car shuttered started smoking from the hood a bit- and smelled as if something had burned underneath the hood. ( the ignition light came on ) at almost 30000 miles. Took it into the deal- they replaced a coil- name unknown. 2- this took several trips into the ford service dept- because it kept happening- before they would actually replace the coil!!! 3- the master cylinder ( brake system) malfunctioned within 30000 miles as well!!! And had to be replaced. 4- the ignition cylinder- with 49000 miles on the car- now has been replaced- no thanks to ford!!! 5- the trunk has never closed properly. I slam it once to close, then I pull up on it to check it's actually locked, it hasn't- maybe on the third time after slamming it shut- it will actually catch and close. These parts are all defective, and it's unjust to the consumers!!!!!
2003 ford focus ignition key would not turn. Vehicle also shows sign of stalling. *ts ***no answer required***
2003 ford focus ignition cylinder/switch locking up. The ignition locked up without warning and continued to do so for a few days then worked fine for a few days and then locked completely 4 days later. I got the ignition cylinder/switch replaced on 12/31/05 for $200.44. Both the dealer and ford admitted that it is a problem and far too many people have had the same complaint via automotivetalk.net. There are 100's of complaints the same as mine!!!
Dt: the contact stated the vehicle was leaking water into the trunk which houses the brake light module, and the rear license plate lights. This caused the wiring module to corrode. After the repairs were made the vehicle is still had the same problems.
Yesterday I was unable to start my car. I put in the key but it would not turn. There was no warning, no clicking, no difficulties starting my car in the past. After several hours we finally got the car started and took it into the shop. They told me that it was the tumbler and the cost of the repair would be $226. Not only did the dealership charge for the damaged part and labor but also to run the diagnostic test in order to find out what was wrong. It cost $79.00 just to have the diagnostic test. I was also informed that this is a common problem in this car. Our car only has 38,000 miles on it! My husband called ford customer service number in order to find out what ford was doing to rectify the situation. He was informed that at this time all they could offer was a 12 month warranty on the new part but would not pay for the repair. I have had time do some research and find that there are many complaints of a similar nature. There where quite a few that had to replace this part more than once and in a few cases twice in one year. I consider this a safety issue. This situation could leave individuals stranded. There is no warning! I consider myself lucky because I had just returned from a trip over the mountains for the holidays. I could have been stranded anywhere that I may have turned off my car. It would have cost me to have my car towed to a town with a ford dealership, let alone the cost of lodging and the expense of missing time off work.
Starting approx. 7 month's after I purchased my brand new 2003 ford focus from jack byrne ford in mecanicville, ny I started to have problems with my car starting (feburary of 2004). I would place the key in the ignition and attempt to start the car. Upon turning the key in the ignition - nothing would happen. The radio would turn on and so would the heat blowers and I would also get some dinging. But, the car failed to start. I have since brought the car to the dealership approx. 4 - 5 times. Each time I had gone through an episode of the car not starting and then when it finally started I brought it to the dealership. The unfortunate part is I should have had it towed to the dealership so they can see first hand - how the ignition doesn't turn over. This has happened to me about 2 dozen times. Each time ford would return the car to me and it would run for a couple weeks problem free. Then sure enough it would start again. Anyhow, this past weekend I was at a friends house with my two children - ages 6 and 3 month's. The car would not start. Thank god I was at someone's house and I wasn't stuck out in my car in december in the cold with my children!! I appreciate that ford was kind enough to look at my vehicle and attempt to make a correction - but after researching this problem I feel like more should be done about this. I mean I bought a new car so I wouldn't have to deal with things like this. I would hate to feel like I wouldn't ever want to own a ford again. I think they need to rectify this situation and correct this problem. I would write a more aggressive letter - but at the moment the car is starting - so I am not feeling hostile!! Please assist.
Ignitions switch failure at 40,000 miles. Known and common problem with vehicle. 2003 ford focus zx3.
Key will not turn in the ignition of 2003 focus. The wheel is now locked and I can't drive the car. I'm probably going to have to get this towed and pay $200-$300 dollars to get it fixed for what seems like a simple problem and I know this happens to many other focus owners. This is not acceptable because I'm 6 months pregnant and my safety is at issue.
2003 ford focus with faulty ignition switch. The switch was lock in placed with no hope of turning the key. As the service manager at our local dealer explained, they know that they have a problem with the ignition switch tumbler set as they have replaced many of them and have been sent a tsb on replacing them with a better assembly made of steel as compared to the original made of pot metal.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2003 Ford Focus?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history