Check a VIN

2013 Ford Focus electrical problems

276 complaints (13% of all complaints for this car). Typical mileage when it fails: 43,990. 4 crashes reported.

owner complaints
276
of this car's complaints
13%
typical mileage
43,990
crashes
4
recalls
2

Which part fails

  • Software
    3
  • Wiring
    2
  • Instrument panel: fuel gauge
    2
  • Horn
    2

At what mileage

Complaints by mileage at the time of the problem.

0k-25k
25k-50k
50k-75k
75k-100k
100k-125k
125k-150k
150k-175k
175k-200k
200k+

Ford Focus electrical problems in other years

19992005201020152018

Specific symptoms reported on the 2013 Ford Focus electrical

Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.

Fire or smoke 17Warning lights 8

Related recalls

Electrical system: wiringReported December 2, 2015 · 9,017 vehicles affected
What is wrong
Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).
Risk
The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge. The recall began on January 7, 2016. Owners may contact Ford customer service 1‑866‑436‑7332. Ford's number for this recall is 14S17-S1.

Recall number 15V813000 · Recall details

Electrical system: wiringReported August 11, 2014 · 133,227 vehicles affected
What is wrong
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Escape vehicles manufactured October 5, 2011, to April 1, 2013, and equipped with 2.0 liter engines and Focus ST vehicles manufactured February 14, 2012, to October 14, 2013, and equipped with 2.0 liter engines. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).
Risk
The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge. The recall began in October 2014. Owners may contact Ford customer service at 1‑800‑392‑3673. Ford's number for this recall is 14S17.

Recall number 14V495000 · Recall details

What 2013 Ford Focus owners say

Most recent owner complaints, unedited.

Filed Sep 23, 2026 · Electrical, Engine · IL

The vehicle suffered a major mechanical and electrical failure on July 28, 2026, and was immediately towed to an authorized dealership. After a multi-day delay awaiting a senior technician's analysis, the dealership issued a single service ticket grouping two distinct issues: a failed Canister Purge Valve (active Safety Recall 26S40) and localized wiring damage. The dealership fraudulently drafted the ticket to imply that external rodent damage caused the recall component failure. However, forensic photographic proof uploaded to the manufacturer database on August 13, 2026, reveals a classic consequential engineering failure: the wiring insulation is severely bubbled and thermally fused from extreme internal circuit resistance caused entirely by the defective recall component. An adjacent plastic snack wrapper remains completely pristine and untouched, disproving the rodent narrative. The vehicle has now been held in safety detention for 57 consecutive days. A corporate supervisor explicitly confirmed on a recorded line that the manufacturer has possessed these forensic photos since mid-August but left the safety file stagnant due to an internal database text-field error. Their software is failing to match the vehicle's engine string '2.0L I4 DI Ti-VCT' to the recall applicability screen 'GDI', creating a data-entry roadblock to deny a free safety remedy. I am requesting an immediate federal audit of the manufacturer's database alignment for Recall 26S40 and a manual technical override directive to initiate repairs. Manufacturer Master Case: CHX-09386351-T9Y5H1.

Filed Sep 9, 2026 · Electrical · ME

RE: FAULTY THROTTLE WIRING / LOCATION CAUSING CORROSION 2013 FORD FOCUS - RECALL NEEDED To Whom It May Concern: My 2013 Ford Focus SE Flex with VIN [XXX] lost power while traveling from [XXX] to [XXX] a couple times before completely dying. My code reader was getting fixed throttle codes 2112, 2111 and pending codes 122, 223. I switched out the throttle body AND accelerator pedal position sensor. This did NOT resolve the issue. I had the Focus towed to Downey Ford in [XXX] where they found a Technical Service Bulletin stating endless Focuses had this issue with corroded wiring, which appears to be caused by TSB 15-0036, which is regarding the wiring harness rubbing against a sharp part of the intake, which can cause shorts in the cables. This Ford Dealership repair cost me $845.80 + grief + an extended stay at my hospitable parents in [XXX]. This concern should be escalated to RECALL status as it leaves your loyal customers stranded on the roadside. My request is a full refund from Ford for $845.80 CAD. See Downey Ford Invoice # SO # XXX attached. Source: [XXX] [XXX]: Bear with me, this is going to be a bit long. TL;DR: Car will not accelerate, CEL/MTC states problem with "accelerator pedal position sensor". Wiring harness has been cut into by rubbing on intake. I want to splice it to fix it, but need advice due to length/resistance requirements. Two weeks ago, my wife was driving my 2013 Ford Focus SE Hatchback and right as she got off the freeway, it instantly lost power, a message appeared on the screen stating "Engine Fault - Repair Now", and it idled super rough. She restarted the engine and it was fine until she tried accelerating more than a tiny bit, at which point the same symptoms occurred again. She was able to limp the car home. Having misplaced my OBD2 scanner, I limped it over to the local auto parts store and they read the code as INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Sep 2, 2026 · Electrical, Transmission · WI

I purchased a 2013 Ford Focus from Boucher Ford of Menomonee Falls, WI in February, 2026. A few months later, Ford issued a recall on this car that requires the Powertrain Control Module to be reprogrammed to avoid issues like a collapsed fuel tank or stalling while driving, potentially causing an accident. I had been informed by a mechanic that this car was sold to me with a custom tune on the PCM. This tune was not disclosed to me when I purchased the car and due to the PCM being modified, the recall cannot be performed without damage to the PCM rendering the car undriveable. I tried working with Jeff Samp (General Manager) at the dealership but he told me they were not required by law to check for tunes when a car is traded in and that he could have someone "look at the car" but if they damage the PCM performing the recall, they will not be held responsible. I opened a case with Ford Motor Company and was informed that they would escalate to some kind of dealership oversight department and that it might take a couple weeks to get a response. I never received a response so I called Ford to inquire and was told that they are not sure why I was told that, that no such department exists, and that all they can do is call the dealership on my behalf and "ask" them to deal with it. Facts: 1. They sold me a car with a modified Powertrain Control Module which can affect many things, even falsely disabling check engine lights. 2. A FEDERAL RECALL for my own safety cannot be performed on this vehicle IN THE CONDITION THEY SOLD IT TO ME, putting my safety, my passengers' safety, and the safety of other motorists at risk. 3. Boucher Ford will not remedy this issue or even contact the previous owner as I requested to find out what kind of tune is on this vehicle so that I can get it removed and this safety recall performed. I want the PCM replaced with a new unit, with the new software that complies with this recall.

Filed Jul 14, 2026 · Electrical, Engine · GA

The evap canister purge valve has been a recurring problem for this vehicle. The canister was replaced in 2021, but continued having problems, as it pulled a vacuum on the fuel tank in upwards of 3/8 inch. (Documented by Murray Ford in 2023 and reassuredthere was no issue by them) the vehicle has displayed inaccurate fuel readings and caused our family to be disabled and then stranded in the night on highway 95. It put the safety of my family, and other motorists at risk The problem hasn't been duplicated because their "software fix" essentially ignored the problem altogether. There were no warnings. According to my vehicle it had at least 50 miles til empty. The fuel sending unit is displaying innacurqte fuel readings, and the fuel pump has displayed symptoms, characterized by surging, stalled when accelerating from a stop, and of course, completely shutting off, while on the highway. I've tried my best to trust and be patient with Ford and for them to do the right thing, but have been brushed off.

Filed Mar 18, 2026 · Electrical · FL · fire

The vehicle was serviced at Bartow Ford in Bartow, Florida, where approximately $1,100 was paid for the installation of a Body Control Module (BCM). Less than two weeks after this repair, the vehicle was returned to the same dealership due to issues involving the windshield wipers. According to the dealership’s own written statement, their technician began diagnosing the issue by replacing a blown fuse and tracing the wiring harness. While inspecting the wiring harness near the heater hose area, the technician observed coolant dripping onto the harness. When the technician touched the harness, it immediately caught fire. The shop foreman then had to disconnect the battery to prevent further damage. This fire occurred while the vehicle was in the possession and control of the dealership and during active diagnosis by their technician. Despite this, the dealership is now attempting to charge approximately $3,700 to repair the wiring harness and related components. We find this unacceptable. It is unreasonable to expect the customer to pay for repairs to damage that occurred during dealership service and inspection. This situation raises serious concerns, particularly because the dealership had recently performed electrical work on the vehicle involving the BCM only two weeks earlier.

Filed Nov 18, 2025 · Electrical, Transmission · NJ

Our 2013 ford focus has had the shudder clutch replaced 3 times in 4 years. We paid $2500 for them to replace the clutch, forks, and adjust the tcm module. Within a year it went again. They replaced under our warranty from the first fix. Then a year later, it went again, warranty was out but ford sent a letter to replace for free. They did.. and now it’s broke again. It shudders and jerks so bad. My college daughter takes it to and from school and relies on it. I don’t understand how Ford gets away with this as it is an ongoing issue with this year make and model vehicle. It’s dangerous, will stall… and jerk. They charge to fix and all it is a bandaid for an ongoing inevitable failure again. On top of that all the electrical to the radio, speakers and such went as well. The vehicle has less than 98k miles on it. It is well taken care of. This transmission issue is Fords negligence. It’s dangerous, deadly; and I cannot believe they continue to charge for an issue they know about.

Filed Sep 9, 2025 · Acceleration, Electrical · MN · crash · 2 injuries

erratic shifting and eratic slipping gears , first happened while on highway and then it wouldnt go in any gear besides reverse and would say transmission overheat wait 5 min . caused another veihcal behind me to slam on there brakes and they ended up getting rear ended from the car behind them ..... all becouse of my cars tcm or transmission issues>!!!! also not too mention ` random unusual noises coming from clutch or shifter when not even start car yet _delayed start and delayed shifting .. i could go on and on this car is a nightmare

Filed Aug 19, 2025 · Electrical, Steering · TX

While driving, the electric power steering went out. I purchased this vehicle on Aug 15 2025 and the Carfax report did not have any information pertaining to an issue with EPAS. To have this repaired will cost me over $3k which I was not prepared for. Being that other Ford vehicles have this EPAS recall, shouldn't a recall be made on the 2013 Ford Focus as well.

Filed May 30, 2025 · Electrical · TN

Power steering randomly stops working when vehicle is running. It happens most often right after I start the vehicle. I can turn the vehicle off and back on a couple times to get it to work. I am worried that it will happen while active driving. Power steering light comes on dashboard. It has happened many times.i will list the last date that it happened.

Filed Jan 3, 2025 · Electrical, Transmission · CA

Has a bad electrical problem and the transmission is got right

Questions about the 2013 Ford Focus electrical

Does the 2013 Ford Focus have electrical problems?

Owners have filed 276 complaints about the electrical of the 2013 Ford Focus, 13% of all its complaints.

At what mileage do 2013 Ford Focus electrical problems start?

The typical (median) mileage in owner complaints is 43,990 miles.

Was there a recall on the 2013 Ford Focus electrical?

Yes, 2 recalls: 15V813000, 14V495000. Check your VIN to see if your car still needs the free repair.

What year does the Ford Focus have the most electrical problems?

The Ford Focus model years with the most electrical complaints are 2000 (1,343 complaints), 2003 (522 complaints) and 2001 (496 complaints).

Other 2013 Ford Focus problems

Transmission 1,102Engine 358Steering 273Fuel system 263Acceleration 112Body 84Locks 53Driver assistance 38Visibility 29Airbags 26Brakes 24Seat belts 18Suspension 15Lights 14Wheels 14Tires 9Seats 4

VIN decoder

See the problems and recalls for an exact car

Buying a used 2013 Ford Focus?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history