The contact owns a 2008 Ford Fusion. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
2008 Ford Fusion brakes complaints
Page 2 of 19: complaints 11 to 40 of 542, newest first, as owners wrote them.
The contact owns a 2008 Ford Fusion. The contact stated while driving at an undisclosed speed, the vehicle drove over a bump in the roadway and the contact depressed the brake pedal however, the vehicle failed to stop immediately. The contact depressed the brake pedal to the floorboard, and the vehicle came to a complete stop. No warning lights were illuminated. The vehicle was taken to a local dealer; however, the dealer was unable to duplicate the failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 151,000.
The contact owns a 2008 Ford Fusion. The contact stated while driving 20 MPH and driving over a black ice, the contact felt the brake pedal had lost pressure. The contact desperately pushed on the brake pedal for the vehicle to stop. The vehicle was taken the dealer and the contact was informed that the brake fluid was low, and that the hydraulic control unit (HCU) needed to be replaced; but the failure reoccurred. The vehicle was taken to the dealer, but no failure was found. The manufacturer was contacted and referred the contact to the federal safety agency Hotline. The failure mileage was 128,000.
The contact owns a 2008 Ford Fusion. The contact stated while driving at various speeds and depressing the brake pedal, the brake pedal went down to the floorboard. There was no warning light illuminated. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) and the vehicle was taken to the dealer for the recall repair. However, upon inspecting the vehicle, the dealer informed the contact that the vehicle had passed inspection and did not need to be repaired under the recall. The dealer then marked the recall as complete. The vehicle was not repaired. The manufacturer was notified of the failure but provided no assistance and referred the contact to the federal safety agency Hotline. The failure mileage was approximately 200,000.
My Breaks gave way for some odd reason I ran into a cable box trying to control or rather stop the vehicle.
The contact owns a 2008 Ford Fusion. The contact stated while driving at various speeds, the brake pedal was depressed but went all the way to the floorboard and the vehicle hesitated to respond, causing a stopping distance delay. There was no warning light illuminated. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the dealer inspected the vehicle and informed the contact that the vehicle passed the valve condition test. The Hydraulic Control Unit (HCU) was not replaced. The contact stated that the failure persisted while driving. Additionally, the contact stated that after the dealer completed the recall repair under the federal safety agency Campaign Number: 17V024000 (Air Bags) the front passenger's side air bag material was protruding from the enclosure. The dealer was notified of the failure but provided no assistance. The manufacturer was notified of the failure and a case was opened. The vehicle was not repaired. The failure mileage was approximately 65,000.
The contact owns a 2008 Ford Fusion. The contact stated while sitting in the vehicle there was an abnormally loud popping sound before the brake pedal went to the floorboard. The ABS and check engine warning lights were illuminated. The vehicle was not diagnosed or repaired. The manufacturer had not been notified of the failure. The approximate failure mileage was 216,000.
The contact owns a 2008 Ford Fusion. The contact stated while driving at an undisclosed speed, the contact depressed on the brake pedal however, the vehicle failed to stop in a reasonable time. The contact depressed the brake pedal all the way to the floorboard for the vehicle to stop. The contact stated that the ABS warning light was illuminated. The failure reoccurred intermittently. The vehicle was taken to a local dealer who inspected the vehicle but could not duplicate or diagnosed the cause of failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 75,000.
The contact owns a 2008 Ford Fusion. The contact received a recall notification for the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the dealer informed the contact that the parts for the recall repair were not yet available. The contact stated that while driving at various speeds, the brake pedal was depressed and went all the way to the floorboard. The contact stated that the brake pedal hesitated to respond, causing a 6-8 feet stopping distance delay. There were no warning lights illuminated. The dealer was notified of the failure and informed the contact that she would be contacted once the parts were available. The contact received another recall notification from the manufacturer that the parts were available and she contacted the dealer. The dealer informed the contact that they would need to order the parts. The contact stated that the failure had been reoccurring while driving. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure and informed the contact that the parts were available. A case was opened. The failure mileage was unknown. VIN tool confirms parts not available.
Unknown
The contact owns a 2008 Ford Fusion. The contact stated that while driving in the snow, the ABS engaged, and the brake pedal depressed to the floorboard without warning. Additionally, the contact stated that the failure might last for a few seconds or for a few days. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was unavailable. The vehicle was taken to the local dealer however, there were no DTC codes retrieved. Additionally, the mechanic was unable to duplicate the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the failure. The failure mileage was approximately 147,000. The VIN was not available.
I am unable to safely brake. When I press my foot on the brake, it doesn’t engage until it completely touches the floor of the car.
The contact's daughter owns a 2008 Ford Fusion. The vehicle had previously been serviced under the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The contact stated that while driving at an undisclosed speed, the brake pedal went to the floorboard when the Antilock Brake System (ABS) was activated. The vehicle was taken to the dealer. The dealer informed the contact that they had done everything required for the recall repair and could not assist with an Antilock Brake System (ABS) fault code shown in the code reader. The manufacturer was made aware of the failure. The failure mileage was approximately 175,000.
The contact owns a 2008 Ford Fusion. The contact stated that the vehicle was included in the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The contact took the vehicle to the dealer to be repaired in August 2021 and was informed that the vehicle had been serviced previously. The contact stated while driving approximately 25 MPH and approaching a red light, the brake pedal was depressed but the vehicle did not stop. The contact stated that the signal light had turned green in time preventing a crash. The contact stated that her vehicle was able to stop while going up an incline because she had not depressed the accelerator pedal. The vehicle was driven to the dealer but was not repaired and remained at the dealer. The manufacturer was not notified of the failure. The failure mileage was 62,000.
Have to apply extra pressure to get my car to stop, which is obviously a huge safety risk if I can’t stop my car properly when braking. I’ve taken the car to a few different mechanics who cannot diagnose or fix the problem. Ford says they are “backed up” & don’t have the parts available yo fix the vehicle.
we've had this vehicle at a ford dealership for 5 months to get the recall work done. the car reacts exactly as the recall is issued for, limited braking on a soft pedal but will stop. The dealer says their computer will not communicate with the car. They've exhausted all tries and Ford will not ship the part, an abs hcu, unless this communication verifies that it is the issue. Since it's all ford related and it's clear on our part what the problem is, our complaint is the company is trying to get away from fixing this serious problem by throwing up walls to hurdle. we've allready incurred significant expense to fix the issue prior to the recall, so it appears they don't want to reimburse those costs by fixing the vehicle. they just need to ship the part to the Helena Montana dealerhip and let them fix the car immediately.
When the breaks are applied during wet weather the car automaticly locks up the system untill you come to a compleat stop then you have to put it in nutruel to get it in gear tobe able to move the car againe very unsafe almost got rearended at 80mph this would have killed us.
The contact owns a 2008 Ford Fusion. The contact stated that while driving approximately 30 mph the brakes failed and the pedal extended to the floor causing the vehicle to crash into a stationary truck. During the crash, the front end was damaged but the airbags did not deploy. No injuries were reported, no police report was taken and the vehicle was not towed. The cause of the failure was not determined. The manufacturer and local dealer were notified of the failure but no assistance was offered. The contact was notified that the vehicle was included in the federal safety agency campaign number 19v904000(service brakes) and 21v158000(airbags) however, the parts to do the recall repairs were unavailable.The contact indicated that the vehicle had experienced the same failure listed in the recall and the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was 169,000.
The contact owns a 2008 Ford Fusion. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) and 21V158000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that whenever the brake pedal was depressed the brake pedal traveled to the floor. The failure mileage was 170,073. VIN tool confirms parts not available.
This car has been taken to supposedly have the brake fluid flushed, changed and tested for not needing the ABS replaced. When picking the car up was not given any paperwork at all. The brake problem did not go away and the additional brake travel it needs to stop still exists. When I called the service manager for dealership who unless I said "don't you need my info?" would not have gotten it, never had the service agent dealing with my car call back at all. When trying to speak to Ford itself on social media, was ignored. My car has been to 2 other mechanics within 2 months, and barely 2 months after this supposed recall work was done. When doing a diagnosis for issues not related to recall, stated how my brake fluid was dirty and needed changing, when taking it to get tires replaced and totally different mechanic told me my brake fluid was really dirty, contaminated. How can all of this be if it was worked on? Why is my life not worthy enough to properly fix my car and have care? I have all of this documented. I want my brake fluid flushed, changed and want the ABS valve repaired because the "test" is wrong. Also want it to be my choice of dealership for it to go to properly be fixed.
The contact owns a 2008 Ford Fusion. The contact stated while driving 40 MPH, the brake pedal was depressed but hesitated to respond and went all the way to the floorboard. The stopping distance was extended by 7-feet. There were no warning lights illuminated. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The contact stated that the failure had been reoccurring increasingly while driving. The contact received a recall notification for the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the dealer informed the contact that the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and informed the contact that parts were not yet available. The vehicle was not repaired. The approximate failure mileage was 86,000. VIN tool confirms parts not available.
2008 Ford Fusion was recalled by Ford because of an anti-lock brake system failure. The first Safety Recall Notice 19S54 was issued in 2019. We got notification of the recall from ford in early 2020. The notification clearly stated and was confirmed by a call to Ford Corporate and our Ford Dealer Park Ford of Mahopac NY that parts for the repair were not available and that we would be informed when they do become available. We were informed that parts were available and we brought the car in for two recall repairs. A recall to replace the Driver side airbag was Completed but not for the Anti-lock brake system. Instead they ran a test on the system and a procedure to try to fix the issue without having to replace parts. This procedure rendered the car unsafe to drive because the brake pedal now needs to be pumped to get pressure for the brakes to be operational. Although this test failed and rendered the car unsafe ford released the car with a promise to replace the parts when they become available. A call to Ford corporate to inform them of this safety issue was that they have no programs that cover the vehicle any more to help in this situation. The Anti-lock brake system originally failed around 2014. We noticed the problem when the Anti-lock brake warning light would intermittently come on. After a period of time of daily driving the vehicle the light remained on the the brake system became spongy. Local repair confirmed the problem and diagnosed it to be an anti-lock brake HCU failure. After getting the vehicle to invoke the anti-lock system while driving the pedal fade disappeared. So the car drove normally but the Anti-lock light was illuminated. Every year the car passed NYS inspection and the brakes were tested. A total brake job replacing brake lines, calipers, drums and rotors was completed in 2020. The system passed with normal braking operation even though the Anti-lock Brake warning light was still on. So for years after the failure the system operated
Vehicle was taken in April 2021 to perform safety recall on ABS Control Unit. I asked to have the unit replaced as i thought it was defective after 6 years of brake pedal going to floor during Anti lock brake events. Ford dealership stated that recall only called for fluids to be flushed and unit tested for pass/fail. At time of recall repair the unit passed. ABS Control Module replacement units available at this time. July 2021, 1300 miles since recall repair I was driving vehicle in the rain, pressed on brake. Brake pedal went to floor again. Took vehicle back into service to have inspected. Ford Service center said they preformed the recall repair as they were required to and now it is my responsibility to replace the defective part. ABS Control Module backordered until at least Oct 2021. Currently 600th in line. This is the scariest safety issue i have ever seen in any vehicle on the road. The inability to brake when needed especially in adverse conditions such as rain or hitting a minor bump in the road, triggering the ABS unit and the valve getting stuck open for periods of time consisting of weeks and months without brake pressure. Not only is it unsafe for the most experienced driver to use the vehicle, i also cannot morally sell this vehicle to someone else as i know how likely they could crash resulting in serious injury. Ford Corporate unhelpful, Ford Dealer Service Center knows of issue and that its defective but cant replace it under recall without corporate approval.
The contact owns a 2008 Ford Fusion. The contact stated that while attempting the stop the vehicle, the brake pedal was depressed and extended to the floor and the vehicle would not immediately stop. The contact later received notification of the federal safety agency campaign number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage 40,000. The contact received notice that the part was available however, there was no part at the dealer. Parts distribution disconnect.
I had the car serviced for a Ford Brake Recall at Watermark Ford Hundai in Marion IL. last month. When I got the car back the brakes felt the same. They go almost all the way to the floor just like before they were supposed to fix them, per the recall notice. I told the service center at Watermark Ford and they said they were fixed, and they would improve over time. They have not improved. So today (7/6/2021) I had to have brake shoes put on my car at another service center and they said the part needed for the recall had not been replaced and they could put it on for $400. I can't afford $400 for a repair that was supposed to be fixed already. I am afraid to drive my car now and it's the only one I have. Please help.
The contact owns a 2008 Ford Fusion. The contact stated that while driving at various speeds, the brake pedal was soft and depressed to the floorboard. There were no warning lights illuminated. The contact received notification of the federal safety agency campaign number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall was unavailable. The vehicle was taken to the local dealer and it was confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The approximate failure mileage was 200,000. Vin tool confirms parts not available.
The contact owns a 2008 Ford Fusion. The contact stated while driving 55 mph, the contact depressed the brake pedal however, the brake pedal went straight to the floorboard. The vehicle failed to slow down which caused the contact to move to a different lane to avoid hitting the vehicle in front. The contact pumped the brake pedal for the vehicle to eventually slow down and stop. The contact pulled the vehicle over to the side of the road and checked the brake fluid reservoir, and the reservoir was full. The contact pumped the brake pedal several times for the brake pedal to go back to normal. The contact took the vehicle to a local dealer to be diagnosed. The mechanic flushed the braking system however, the failure persisted. The contact was informed that failure was like the federal safety agency campaign number: 19V904000 (Service Brakes, Hydraulic). The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 157,000.
Twice in about 10 months the car was park and when backing out of a parking spot the car did not stop when pressing on the brake. The latest on was June 30 , 2021
The contact owns a 2008 Ford Fusion. The contact received notification of the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer for the recall repair and the Hydraulic Control Units (HCU) were tested as part of the recall, but it failed. The dealer provided the contact with a loaner vehicle while awaiting the part to do the recall repair and notified the manufacturer of the failed HCU test. The dealer later informed the contact that the part was not available and gave the contact his vehicle back stating that it was safe to drive. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 103,000. Vin tool confirms parts not available.
The contact owns a 2008 Ford Fusion. The contact stated that while driving at various speeds, the brake pedal would fail to operate as needed upon depression as the ABS warning light illuminated on the instrument panel. The contact then received a notification for the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The contact had taken the vehicle to the dealer where a diagnostic test was performed and the contact was informed that the ABS module needed to be replaced before the recall could be performed. The contact had taken the vehicle to an independent mechanic where the mechanic replaced the ABS module. The vehicle was taken back to the dealer where they attempted to charge her for the recall repair. The manufacturer was made aware of the failure however, there was no assistance provided. The failure mileage was unknown. Vin tool confirms parts not available.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2008 Ford Fusion?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history