Purchased vehicle unknowingly part of program 19B37 that had not been completed. Coolant has leaked into the engine and now need s new engine. Does not qualify for service action 21N12 since original satisfaction program 19B37 was not completed and now past mileage. Now the vehicle needs an entire engine! Still owe on the car, warranties have all expired. Engine must ne replaced due to the reported coant defect that I was not made aware of at purchase. Good should fix this!
2019 Ford Fusion engine complaints
Page 3 of 8: complaints 41 to 70 of 198, newest first, as owners wrote them.
Yesterday, [XXX], I was driving my vehicle on [XXX] in rural Kansas, to drop my mother off at the airport, and my [XXX] daughter was in the vehicle. My vehicle's temperature went directly to warning status, and I was no longer able to accelerate. I immediately put my hazards on and tried to make my way to the nearest exit to ensure we were in a safe position. Ford knows that coolant intrusion is possible in the engine block. While discussing with Ford today on the phone from 11:07 AM until 11:34 AM, and being escalated to a supervisor, they said that nothing could be done on their end, and advised to contact the federal safety agency. The safety of myself and others was at risk because of the faulty manufacturing of the engine and coolant system, which they report is part of a customer satisfaction program, but this is a major safety concern because, in the event it was not midday and there were more vehicles on the road, there could have been an accident. Ford Customer Satisfaction Program 21N12 One-time repair for vehicles included in 19B37 This is a known issue Ford recognizes through their customer satisfaction program. They are unwilling to assist, although in 2022, I was under the mileage specifications included in the customer satisfaction program. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to Auto Zone where it was connected to a diagnostic machine and failure codes retrieved indicated that the failure was cylinder failure and a coil pack. The contact was informed that the cylinders and coil pack needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken to an independent mechanic where it was diagnosed with cylinder and head gasket failure. The vehicle was not repaired. The vehicle was then taken to the dealer where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact was advised to take the vehicle to the dealer for diagnostic testing. The failure mileage was approximately 143,000.
The contact owns a 2019 Ford Fusion. The contact stated that upon start the vehicle, the engine was misfiring. There was no warning light illuminated. The vehicle was taken to a local dealer to be diagnosed, and the contact was informed that the head gasket was faulty and needed to be replaced. Additionally, the engine needed to be replaced due to coolant intrusion. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 108,000.
The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 60 MPH, there was an abnormal rattling sound coming from the engine compartment. While the vehicle was stopped, the vehicle started shaking abnormally. On one occasion, while driving 10 MPH, the vehicle stalled. The vehicle was not able to be restarted and remained at the location for almost a week. The vehicle was then towed to the residence. The vehicle was taken to a dealer but was not diagnosed or repaired. The vehicle was then taken to an independent mechanic where it was diagnosed and determined that the flex plate was cracked and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 101,000.
The contact owns a 2019 Ford Fusion. The contact stated that while operating the vehicle, the engine overheated with the check engine warning light illuminated. The vehicle was taken to the local mechanic who replaced the water pump however, the failure persisted. The cause of the failure was not yet determined, and the vehicle was not repaired. The manufacturer and local dealer were not notified of the failure. The failure mileage was 75,000.
My car is part of a recall with Ford Motor Company - customer satisfaction recall 21N12 - I HAVE A COOLANT LEAK WHICH CAN CAUSE FIRE, and dealership refuses to help because my VIN number doesn"t show up as being affected. However in a letter mailed out by Ford Motor Company it states my vehicle is in fact covered under the saftey recall.. original recall letter was for 2013-2028 ford fusion ecoboost engines. Ford mailed out another letter saying that some 2019 models will experience same issue due to having the same engine. Ford did not mail out letters to 2019 owners for this recall. according to the recall , my car was built at the same plant and same time. I need my VIN number somehow attached to this recall so my dealership can do what is right. Fryer Ford in Ahoskie, NC refuses to help and I do not want to risk driving something that can catch fire. Please tell me what I need to do or verify that my car is in fact part of this recall. Thank you for any assistance in this matter
The contact owns a 2019 Ford Fusion. The contact stated that the vehicle was shaking abnormally at start-up. The vehicle was taken to the dealer however, a cause for the issue was not found. The failure persisted, and the check engine warning light illuminated. The contact's husband replaced the spark plugs and ignition coils; however, several days later, the failure reoccurred, and the spark plugs, and ignition coils were replaced an additional three separate times due to the persistent failure. The vehicle was then taken to an independent mechanic where a diagnostic test indicated that there was coolant intrusion into cylinder #3. The manufacturer was notified of the failure and informed the contact that there were no recalls on the vehicle. The contact was then referred to the federal safety agency Hotline to report the failure. The vehicle was not repaired. The failure mileage was approximately 94,000.
The contact owns a 2019 Ford Fusion. The contact stated that upon start of the vehicle, an "Engine Coolant Overtemperature" message appeared on the instrument panel and the Ford Mobile App. The contact attempted to drive the vehicle to an independent mechanic; however, the vehicle hesitated upon depression of the accelerator pedal. The contact drove the vehicle back to the residence and used a code reader to retrieve the "Cylinder Head Over Temperature" message. The contact's stepfather called the dealer and was informed hm that there was an undisclosed recall; however, the VIN was not included in the recall. The manufacturer was notified of the failure and the contact was referred to the federal safety agency Hotline. The vehicle was not repaired. The failure mileage was unknown.
The contact’s daughter owns a 2019 Ford Fusion. The contact stated that when the vehicle was started, the check engine warning light illuminated. Additionally, the messages "Engine Overheated" and "Service Now” were displayed. The contact’s daughter attempted to drive the vehicle, but the vehicle had shifted into "LIMP Mode". The vehicle was pulled over into a parking lot and restarted, but the failure persisted. The vehicle was taken to the residence where a handheld diagnostic machine retrieved information that the cylinder head was over temperature. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 80,000.
The car would periodically have white smoke coming out the exhaust I assumed it was bad gas and then all of a sudden it just had a ton of white smoke ended up being the the head gasket to the small block was bad and defective and Ford knew about it and did nothing about it. There was a safety performance alert, which I did not receive.The car is only six years old and I just paid it off.
The contact owns a 2019 Ford Fusion. The contact stated that while having a routine oil change, the mechanic observed a leak in the oil pan. The vehicle was taken to three dealers and one independent mechanic where it was diagnosed that there was an oil pan gasket leak and the oil pan gasket needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 60,000.
A check engine light came on and our mechanic ran diagnostics to find that there was antifreeze leaking. He said it could be the head gasket but we needed to take it to Ford dealership. We took it in and were told that it is indeed leaking coolant into cylinder due to a crack in the cylinder wall. I am the original owner and have kept up with all maintenance in the 6years I have owned the car. I was told that Fors is “aware” of these issues.
Coolant leakage (no warning light/alert for driver) cause significant damage to engine block. Damage lead to cylinder misfiring and oil leakage. Oil leakage/check engine light occurred same day, prompting scheduling service at Ford dealership. Ford service center states short block needs replaced and car is not safe to drive. Upon research, this is a known issue for this make/model/year and has an open customer satisfaction program that covers the cost of repairs. However, both service center and Ford Customer Service state this vehicle's VIN number is not included in the repair program, despite acknowledging this is the same problem addressed in the repair program. Ford Customer Service recommended submitting this problem and the car's VIN to the federal safety agency for possible inclusion in the outstanding recall.
The contact owns a 2019 Ford Fusion. The contact stated that while coming to a stop, the contact heard a loud sound coming from the engine compartment. There was no warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the flex plate, torque converter, and front pump had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 75,000.
In 2020, I received a notice from Ford that my 2019 Ford Fusion had a Customer Satisfaction Program repair. I took the vehicle to an authorized Ford Dealer in April of 2020 to have the repair completed, which to my knowledge was completed by the service technicians at Ford. Today, my car broke down while I was traveling to work. I was able to get it to an authorized Ford service dealer and they informed me that my engine was going to need to be replaced due to coolant leaking into the engine. According to Ford, they are not willing to help with the cost of fixing the engine, since my mileage is past what is stated on the CSP notice, even though this was supposedly fixed 5 years ago, way before the mileage that was required and the car was still under warranty. Now, I'm stuck trying to figure out how to pay for a new engine, when Ford knew about this issue and is unwilling to help their customers even when they do the right thing.
coolant intrusion in engine with less than 7 years of life and under 84k miles. wont replace engine with the program because it didnt get the pcm update beforehand. Never got a letter for it and my vin doesnt say im apart of the program even though my car was build in the time frame and plant that they had this coolant intrusion issue.
Coolant intrusion that Ford knows happens with these cars even with maintenance now they want me to pay 10k to get a new Engine with an updated part.
Ford 2.0L EcoBoost engine. 2017-2019 Fusion. Also, in 2 other Ford and Lincoln models. I bought 2019 Fusion used and car has just under 69000 miles. Due to a known engine defect there can be coolant intrusion into a cylinder. In my case #2 cylinder. See TSB # 22-2229 from Ford. Check engine light came on. took to dealer and replaced 1 ign coil and 4 spark plugs. Thought issue resolved until check engine light came back on. Returned to dealer and advise that engine needed replacement. If continued to operate engine could lock-up while driving thus creating a safety for myself and others on the highway. Ford knows of this defect caused by their design of the block.
The contact owns a 2019 Ford Fusion. The contact stated that while the vehicle was parked, the vehicle stalled. There were no warning lights illuminated. The contact took the vehicle to an independent mechanic, where it was diagnosed that the flex plate was loose. The vehicle was then towed to a dealer, where it was diagnosed with a cracked flex plate. The vehicle was repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 56,660.
The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle was able to be restarted. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who determined there was coolant intrusion into cylinder #3, causing damage to the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the federal safety agency Hotline for assistance. The failure mileage was 82,000.
The contact owns a 2019 Ford Fusion. The contact stated that while driving at an undisclosed speed, there was an engine misfire, with the check engine warning light illuminated. The vehicle was able to restart. The vehicle was taken to the dealer where it was diagnosed with coolant intrusion into the engine, which caused engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the federal safety agency Hotline for assistance. The approximate failure mileage was 108,831.
The contact owns a 2019 Ford Fusion. The contact stated that while starting the vehicle, there was a loud clanking noise coming from the engine compartment, with the check engine and transmission warning lights illuminated. The vehicle was able to restart. The vehicle was towed to the dealer, where it was diagnosed and determined that the flex plate had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the federal safety agency Hotline for assistance. The failure mileage was approximately 126,000.
The failure occurred in the engine block or head gasket of the 2.0L EcoBoost engine, leading to coolant intrusion into the cylinders. Yes, the affected engine components were inspected by local dealer and confirmed long block issue. The safety of the driver and others was put at risk due to the potential for: Sudden engine misfire or stalling, which could lead to a loss of power while driving. White smoke from the exhaust reducing visibility for other drivers. Engine overheating, which could cause a breakdown in traffic or on highways. Yes, the problem has been reproduced and confirmed by a Ford dealer and/or independent service center through diagnostic tests, which identified coolant intrusion into the cylinders. The vehicle has been inspected by the manufacturer’s authorized dealer during diagnostic testing to confirm the issue. It has not been inspected by police or insurance representatives. Yes, warning lamps and other symptoms appeared prior to the failure, including: MIL (Check Engine Light) with DTCs such as P0300-P0304 White exhaust smoke, indicating coolant burning in the engine. Engine running rough, especially during cold starts. Low coolant level, requiring frequent refills, with no visible external leaks. These symptoms first appeared [insert time frame or mileage if known].
1.5 liter Engine built in 2019 has Antifreeze Leaking inside cylinder 1 needs Complete Engine. Also a recall on Electrical System propulsion System and Traction Battery Management System ENERGY Control Module Part Number: 23533.
The contact owns a 2019 Ford Fusion. The contact stated that while driving approximately 30-35 MPH, the "Engine Coolant Overtemperature" message was displayed on the instrument panel. The accelerator was depressed and failed to respond as intended. The vehicle started losing motive power. The contact was able to coast to the side of the road. The contact inspected the vehicle and noticed that there was no coolant inside the reservoir. The contact added coolant to the vehicle. The vehicle was restarted, and the contact drove to the residence; however, the failure recurred, and the coolant reservoir was empty. The vehicle was taken to the dealer, and it was diagnosed and determined that the radiator had failed. The vehicle was repaired. The dealer diagnosed the vehicle again and confirmed coolant intrusion into the cylinders, causing engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The approximate failure mileage was approximately 38,500.
In 2023 I was experiencing engine issues. There was a check engine light that continued to come on signaling a cylinder misfire. I replaced the sparkplugs and coils however the issue persisted so I made an appointment to bring it to a Ford Dealership. The Ford dealership contacted me to advise that the issue I was experiencing is a known issue with the Ford Ecoboost motor where coolant ends up leaking into the cylinders causing a failure. This is a huge detriment to safety because I could have had a vehicle fire, or my car could have seized up on the highway while I was driving had I not gotten this to a dealership. I contacted Ford regarding the issue and their response was alarming. Since I was slightly over my warranty my vehicle was not covered for any repairs and they would not address the issue despite it being a known problem with these motors. I was stuck with a 7,000 dollar repair bill and "save your receipts and hope for the best" from Ford. Their negligence was alarming and after doing much research I have found that there still was not a recall issued and many people have experienced this issue.
The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the vehicle shuddered and loss automotive power. No warning light was illuminated. The vehicle was towed to an independent mechanic where it was diagnosed and determined that the spark plugs needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was towed back to the independent mechanic where it was diagnosed that the coolant reservoir tank needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was taken to a different independent mechanic where it was diagnosed that the engine needed to be replaced. The contact researched and was made aware of an unknown recall; however, the VIN was not included. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 56,000.
The contact's daughter owns a 2019 Ford Fusion. The contact stated that the vehicle failed to start on the first attempt. The contact stated that once the vehicle was started, there was a white-colored smoke coming from the exhaust pipe. The contact stated that while driving at various speeds, the vehicle hesitated while depressing the accelerator pedal, with the check engine warning light illuminated. The vehicle was initially taken to an independent mechanic and was diagnosed with cylinder #2 misfire. The spark plugs were replaced; however, the failure persisted. The vehicle was then taken to a dealer where a diagnostic test was performed, and the result was coolant intrusion into cylinder #2. The contact was informed that the engine short block needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that there were no recalls on the VIN. The contact was referred to the federal safety agency Hotline to report the failure. The failure mileage was approximately 74,000.
See attached document for complaint.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Ford Fusion?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history