Freightliner Argosy recalls

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk

The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

Remedy

DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1‑800‑547‑0712. DTNA's number for this recall is FL848.

Recall number 20V214000 · Recall details

What is wrong

Daimler Trucks North America LLC (Daimler) is recalling certain model year 2014-2015 Freightliner 122SD, Argosy, and Cascadia trucks manufactured July 22, 2013, to October 13, 2014, equipped with Wabco Quick Release Valves with Double Check manufactured February 6, 2013, to April 19, 2014. The affected vehicles may have been produced with a defective valve seat installed.

Risk

Improper seating can result in the valves improperly adjusting air pressure levels, thereby reducing the braking performance of the vehicles and increasing the risk of a crash.

Remedy

Daimler will notify owners, and dealers will inspect, and replace the valves, free of charge. The recall began on December 30, 2015. Owners may contact Daimler customer service at 1‑800‑745‑8000. Daimler's number for this recall is FL-673.

Recall number 14V717000 · Recall details

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, Columbia, and M2 Business Class, and Western Star 4700, and 4900 vehicles manufactured August 5, 2013, through November 15, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."

Risk

If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

Remedy

DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall began on May 22, 2014. Owners may contact Daimler at 1‑800‑385‑4357. DTNA's number for this campaign is FL-661. Note: This is an expansion of recall 13V‑604.

Recall number 14V150000 · Recall details

What is wrong

Daimler Trucks North America (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, M2 Business Class, and Western Star 4700, 4900, and 6900 vehicles manufactured August 5, 2013, through November 15, 2013; and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."

Risk

If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

Remedy

DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall is expected to begin by January 26, 2014. Owners may contact Daimler at 1‑800‑385‑4357. DTNA's number for this campaign is FL-654.

Recall number 13V604000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2010 and 2011 argosy, cascadia, and cornoado heavy trucks manufactured from january 4, 2010, through november 30, 2010, equipped with 40k airliner suspensions. The rear suspension may fracture through the center bolt hole after vehicle assembly.

Risk

If undetected, over time the rear end of the spring may separate from the vehicle causing a hazardous road debris situation, increasing the risk of a crash.

Remedy

Daimler trucks will notify owners and dealers will replace the mono leaf springs free of charge. Daimler trucks will send an interim letter to owners informing them of the recall. The safety recall is expected to begin on or about august 5, 2011. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 11V109000 · Recall details

What is wrong

Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.

Risk

An oil leak may result in a fire.

Remedy

Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1‑800‑447‑4986 or daimler trucks at 1‑800‑547‑0712.

Recall number 09V366000 · Recall details

What is wrong

Daimler trucks is recalling 900 my 2008 freightliner argosy, argosy rhd, cascadia, columbia, century st, coronado, sterling acterra, l-line and western star 4900 trucks equipped with bendix mv-3 dash control valves. The molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. This condition can allow the rubber double check valve to become lodged in the body opening under certain circumstances.

Risk

If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged double check valve thereby depleting the secondary reservoir, causing reduced ability for modulating the service emergency brakes increasing the risk of a crash.

Remedy

Dealers will inspect the mv-3 dash valve for the production date code. Valves in the affected production lots will be replaced free of charge. The recall began on october 9, 2008. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 08V159000 · Recall details

What is wrong

On certain trucks equipped with trw steering gears, models tas85 and rcs85, these steering gears contain potentially defective sector shafts with an incorrect gear tooth which may interfere with the rack-piston teeth, resulting in a stick or bind condition.

Risk

This condition has the potential to cause the steering gear to stall and restrict the steering turning angle of the vehicle which could result in a vehicle crash.

Remedy

Freightliner is working with trw to replace the defective steering gear (please see 07e101). The recall began on april 18, 2008. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V592000 · Recall details

What is wrong

On certain truck-tractors equipped with holland simplex se or se ii fifth wheels, the latch lever pivot bolt assembly may have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot may cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.

Risk

There is a possibility that the fifth wheel may fail to latch without the driver's knowledge. When the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.

Remedy

Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on january 3, 2008. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V530000 · Recall details

What is wrong

On certain trucks, a manufacturing error in the fuel-water separator preheater thermoswitch may prevent the fuel preheater from turning off if the ignition is left on. If the ignition switch is left on when fuel is added to the fuel- water separator at the factory or during a filter element change, a small flame may occur inside the filter cover.

Risk

The potential exists for the flame to spread resulting in possible personal injury.

Remedy

Dealers will inspect the fuel filter date code and thermoswitch lot code to determine if they contain the suspect component free of charge. The recall began on october 4, 2007. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V335000 · Recall details

What is wrong

Certain freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between july 2002 and july 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Risk

These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Remedy

Freightliner will notify owners and repair the vehicles free of charge. The recall began on january 11, 2008 to freightliner, sterling, and freightliner custom chassis owners; to thomas built bus owners on february 1, 2008. Owners can contact freightliner at 1‑800‑547‑0712.

Recall number 07V302000 · Recall details

What is wrong

Certain heavy trucks, shuttle buses, and school buses equipped with bendix modulated spring brake valves. A defect in the modulated spring brake valve casting may cause an intermittent delay in the application of the park brake.

Risk

The vehicle may rollaway without warning, possibly causing personal injury.

Remedy

Freightliner will notify owners and replace the defective valves free of charge. The recall began on june 28, 2006 to freightliner, sterling, and fccc owners. Thomas built mailed letters to owners beginning july 27, 2006. This recall has been superseded (replaced) by recall 07v302 (fl-504).

Recall number 06V205000 · Recall details

What is wrong

On certain trucks, the protective cover for the cab power distribution model (pdm) may be missing or improperly installed.

Risk

If the protective cover is missing or not positioned correctly, any water intrusion from an open window or windshield leak may seep through the upper dash cover seam and drip onto the pdm. Water on the pdm circuits may cause a short circuit resulting in a fire that could cause personal injury.

Remedy

Dealers will install a new cover free of charge. The recall began on december 18, 2006. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 06V190000 · Recall details

What is wrong

Certain 2005 thomas built fs-65 and c-2 school buses and 2005 freightliner argosy, columbia, century st, and m2 business class trucks manufactured between june 4 and july 8, 2005. The spindles in the rear axle housing were overheated during the heat treatment process. Incorrectly heat treated spindles could result in a fracture of the spindle.

Risk

Incorrectly heat treated spindles could fracture, possibly resulting in a vehicle crash without warning.

Remedy

Freightliner will notify its customers and inspect for the heat treat date code on the end of the rear spindles and replace the axle housing if necessary. The recall is expected to begin on january 23, 2006. Owners may contact freightliner

Recall number 05V467000 · Recall details

What is wrong

On certain trucks equipped with air brakes, the plastic push-to-connect air line fitting cartridge could be improperly welded into the nylon junction block housing allowing an air line to become disconnected.

Risk

This could lead to reduced brake control, loss of service brake control, or the emergency brakes automatically applying, possibly resulting in a crash without prior warning.

Remedy

Dealers will install a new cab air manifold. Owner notification is expected to begin on january 21, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 800‑547‑0712.

Recall number 03V500000 · Recall details

What is wrong

On certain truck tractors equipped with jost international jsk 37u series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.

Risk

If left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.

Remedy

Dealers will replace the bracket pins and repair instructions free of charge. Owner notification began november 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact jost international at 616‑846‑7700 or by email to [email protected] or freightliner at 1‑800‑547‑0712.

Recall number 03V227000 · Recall details

What is wrong

On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.

Risk

Seizure of the bearings can cause wheel separation or wheel end fire.

Remedy

Dealers will replace both front hubs. Owner notification is expected to begin on or before september 20, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 1‑800‑547‑0712.

Recall number 03V112000 · Recall details

What is wrong

Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.

Risk

This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.

Remedy

Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began november 8, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 1‑800‑547‑0712.

Recall number 01V140007 · Recall details

What is wrong

Vehicle description: vehicles equipped with certain haldex brake system two and four port relay valves. The valve may stick open when a high-pressure application is released.

Risk

When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. The driver may lose braking ability under a service application, possibly resulting in a vehicle crash.

Remedy

Dealers will replace these valves. Owner notification began october 17, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 1‑800‑547‑0712.

Recall number 01V189001 · Recall details

What is wrong

Vehicle description: trucks, school bus and motor home chassis, and transit buses equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.

Risk

If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.

Remedy

Dealers will replace the defective ball sockets and/or drag links. Owner notification began may 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 1‑800‑547‑0712 or trw customer service at 1‑866‑280‑3287.

Recall number 01V044002 · Recall details

What is wrong

Vehicle description: heavy duty trucks and school bus chassis built with bendix air ABS with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.

Risk

This condition could cause the ABS ecu to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.

Remedy

Dealers will replace the ABS ecu.

Recall number 00V232002 · Recall details

What is wrong

Vehicle description: heavy duty trucks equipped with certain 12 volt power outlets. An unplugged hole in the floorboard can allow road salts and moisture into an area where a 12 volt power outlet is mounted.

Risk

A short between the outlet terminals could develop causing an electrical fire.

Remedy

Dealers will inspect all vehicles to determine if a floorboard plug was installed. On vehicles found without a plug, a new outlet and plug will be installed.

Recall number 00V082000 · Recall details

What is wrong

Vehicle description: heavy duty trucks built with dual leaf spring type air ride suspensions and vehicles built with single leaf spring type air ride suspensions. Rear suspension springs can fracture through the center bolt hole after vehicle assembly.

Risk

If undetected, the rear end of the spring could separate from the vehicle causing a hazardous road debris situation.

Remedy

For vehicles equipped with single leaf springs, dealers will remove and replace all springs. For vehicles equipped with dual leaf springs, dealers will inspect for cracked springs and replace if cracked.

Recall number 00V081000 · Recall details

What is wrong

Vehicle description: heavy duty trucks. The brake pedal pivot pin retainers may not have been properly installed.

Risk

The brake pedal could move increasing the risk of a crash.

Remedy

Dealers will replace the brake pedal pivot pin with a longer pin that prevents mis-installation of the retaining hitch pin.

Recall number 99V352000 · Recall details

What is wrong

Vehicle description: heavy duty trucks. The outboard bearing on the steering axle hubs can fail due to water intrusion through a hubcap vent.

Risk

This condition can result in a separation of the wheel.

Remedy

Dealers will remove the hubcap and inspect for water intrusion and corrosion. The hub and bearing assembly will be replaced if there is evidence of corrosion. A non-vented hubcap will be installed.

Recall number 99V295000 · Recall details

What is wrong

Vehicle description: heavy duty trucks. The cigarette lighter is located close to the floorboard where an object on the floor may inadvertently hold the cigarette lighter in. The lighter circuit breaker only protects the circuit on the first event.

Risk

Subsequent events result in overheating with the possibility of a dash fire.

Remedy

Dealers will replace the cigarette lighter element with one that has a peripheral ring and pushbutton that prevents inadvertent activation. The circuit protection will also be changed from a breaker to a fuse.

Recall number 99V144000 · Recall details