2002 Freightliner Business Class M2 problems

What is wrong

Daimler trucks is recalling 28,764 my 2001 through 2008 fccc b2 and fs65 school bus chassis, fccc fb65 conventional buses, and sterling acterra, freightliner fln, and business class m2 heavy trucks, built from january 26, 2000, through march 24, 2008, manufactured with arvinmeritor or axle alliance company 6,000 through 8,000 pound front axles utilizing a four piece spindle-nut set. These axle assemblies may have been produced with a thin spindle nut which may lead to incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure.

Risk

Continued operation may lead to wheel separation and possibly a vehicle crash.

Remedy

Daimler trucks will notify owners and will repair the vehicles free of charge. The recall began on january 8, 2009. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 08V137000 · Recall details

What is wrong

On certain trucks and fire trucks equipped with kys 4735-43782-02 engine cooling fans and built on caterpillar 3126, c7, mbe906, mbe926, or cummins isc engines, the steel fan insert on the cooling fans can crack.

Risk

This can result in fan breakage, resulting in vehicle damage or personal injury.

Remedy

Dealers will replace the engine cooling fan free of charge. The recall began on june 8, 2005. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 05V126000 · Recall details

What is wrong

On certain trucks built with 8,000 or 6,000 pound front axles and four-piece spindle nut sets, premature front ,wheel bearing wear may be caused by inconsistent bearing endplay adjustment.

Risk

If allowed to progress, the front wheel assembly may separate from the vehicle, which could result in a crash.

Remedy

The dealers will replace the front axle oil seals and hub cap gaskets on both sides. The recall began september 7, 2004. Owners should contact freightliner at 1‑800‑547‑0712.

Recall number 04V272000 · Recall details

What is wrong

On certain trucks equipped with manual transmission, the tapered joint that attaches the shifter to the transmission may become loose making it difficult to put the transmission into gear.

Risk

If shift lever detachment occurs, tha ability ro accelerate ot maintain speed will be lost, increasing the risk of a crash.

Remedy

Dealers will re-secure the shift lever to the transmission using threadlock and re-torquing the fastening bolt. Owner notification began on may 21, 2004. Owners should contact freightliner at 1‑800‑547‑0712.

Recall number 04V205000 · Recall details

What is wrong

On certain trucks with air brakes, the air management unit introduced with m2 trucks includes a pressure switch assembly (psa) module for the low air pressure indicator and stop lamp control functions. The psa module cover allows water ingression that could cause the stop lamp switch to short "on." the stop lamp short can be intermittent or with the key off.

Risk

This could cause the stop lights to illuminate continually and not allow other drivers to see when the brakes are being applied which could result in a crash.

Remedy

Dealers will inspect the pressure wswitch a module and electrical connectors and replace if necessary. Owner notification began on august 15, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact freightliner at 1‑800‑547‑0712.

Recall number 03V162000 · Recall details

Odi is closing this investigation based on daimler truck north america 's (dtna) march 19, 2008, defect notification report which outlines dtna's intention to campaign 28,764 freightliner, sterling, and freightliner custom chassis vehicles [equipped with either arvinmeritor or axle alliance company 6,000 - 8,000 pound rated front axle assemblies utilizing a four piece spindle nut set] manufactured between january 26, 2000, and march 24, 2008.dtna has proposed providing a remedy for the currently installed four piece spindle nut systems which may lead to incorrect end play, [bearing] cone spin, excessive heat, degradation of lubrication, wear of the spindle nut [backface] and bearing journal, oil contamination with metal shavings, and premature bearing failure.continued operation may lead to a wheel separation.odi has relieved dtna of the responsibility to provide the information requested as part of this rq so that dtna could focus their efforts on investigation of the wheel separation issues and planning and implementing a responsive and timely field action (campaign).

RQ07003