2010 Freightliner Business Class M2 problems

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk

The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

Remedy

DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1‑800‑547‑0712. DTNA's number for this recall is FL848.

Recall number 20V214000 · Recall details

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2010-2017 Freightliner M2 Business Class, 108SD, 114SD, and Columbia trucks manufactured from January 6, 2010, through February 29, 2016, equipped with certain Bendix rear disk brakes and spring suspensions. The rear disk brake caliper may have been installed incorrectly, thus allowing the caliper to contact the suspension.

Risk

Caliper contact with the spring suspension may reduce the braking effectiveness, increasing the risk of a crash.

Remedy

DTNA will notify owners, and dealers will correct the orientation of the rear brake calipers, as necessary, free of charge. The recall began on June 8, 2016. Owners may contact DTNA customer service at 1‑800‑547‑0712. DTNA's recall number for this campaign is FL-705.

Recall number 16V206000 · Recall details

What is wrong

Daimler Trucks North America (DTNA) is recalling certain model year 2009-2014 model year Freightliner Business Class M2 and Freightliner Custom Chassis MT45 and MT55 chassis manufactured August 27, 2008, through December 10, 2013 and equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Risk

The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.

Remedy

DTNA will notify owners and dealers will update the hybrid transmission software, free of charge. The recall began on February 5, 2014. Owners may contact DTNA at 1‑503‑745‑6910. DTNA's recall number is FL-657.

Recall number 13V634000 · Recall details

What is wrong

Daimler Trucks North America (DTNA) is recalling certain model year 2009-2012 Freightliner, Sterling, and Western Star vehicles manufactured from July 7, 2008, through December 15, 2011, and equipped with perpendicular air tank mounting brackets. The air tank mounting brackets may develop cracks which can lead to the air tank brackets separating from the frame rail. The air tanks may also separate from the vehicle.

Risk

Air tanks that become separated from a moving vehicle may create a road debris hazard, increasing the risk of a crash.

Remedy

DTNA will notify owners, and dealers will replace the air mounting brackets, free of charge. The recall began on December 24, 2012. Owners may contact Daimler Trucks North America toll free at 1‑800‑547‑0712.

Recall number 12V405000 · Recall details

What is wrong

Daimler trucks (dtna) is recalling certain model year 2006-2013 freightliner, sterling, and western star vehicles, equipped with detroit diesel epa07 and epa10, dd13 and dd15/16 engines, manufactured from january 20, 2006, through february 20, 2012. The pump to rail high pressure fuel line support system used on these engines is sensitive to assembly torque and may be damaged during service work. As a result of other repairs, the line supports may loosen, potentially leading to fuel line cracking and a fuel leak.

Risk

A fuel leak could create a road hazard, increasing the risk of a crash. Also a fuel leak in the presence of an ignition source can result in a fire.

Remedy

Dtna will notify owners, and where necessary, the high pressure fuel line support system will be replaced by dtna authorized service facilities, free of charge. The safety recall began on april 27, 2012. Owners may contact dtna at 1‑800‑547‑0712.

Recall number 12V074000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2010 freightliner business class m2 vehicles manufactured from august 25, 2009, through september 3, 2009. These vehicles were built with out of specification inboard seat belt anchor plates that are not as robust as intended.

Risk

In the event of an a crash, the seat belt anchorage may not continue to hold in place the seat belt apparatus, increasing the risk of the belt not restraining the seat occupant as intended, and increasing the risk of injury to the occupant.

Remedy

Daimler trucks will repair the vehicles and replace the existing seat belt anchor as necessary free of charge. The safety recall is expected to begin on or before march 11, 2011. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 11V008000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2007 through 2010 freightliner business class m2, custom chassis mt45, s2 chassis, and stering acterra vehicles manufactured from october 5, 2006, through may 24, 2010, equipped with epa 2007 mbe 900 detroit diesel engines. Engine software may not react properly to certain aftermarket treatment device fault codes. The software may unnecessarily shutdown a vehicle or may fail to shutdown a vehicle with an aftermarket device over-temp fault.

Risk

Unexpected shutdown of a vehicle may increase the risk of a crash. Overheating of the aftertreatment device without engine shutdown may result in a fire.

Remedy

Daimler trucks will notify owners and repairs will be performed by detroit diesel free of charge. The safety recall began on december 30, 2010. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 10V472000 · Recall details

What is wrong

Daimler trucks (dtna) is recalling certain model year 2009 and 2010 freightliner business class m2, sterling acterra, a-line, and l-line heavy trucks manufactured from september 8, 2008 through april 20, 2009 equipped with trw igen3 intermediate steering columns. The weld around the igen3 steering shaft tube that secures the spline tube to the intermediate tube may be mislocated (I.e., not fully over the seam created when the tubes are pressed together.)

Risk

Mislocated welds may result in torsional and axial strength falling below acceptable levels. This condition could result in separation of the steering column, loss of steering control and a vehicle crash without warning.

Remedy

Dtna will notify owners and the buses will be repaired free of charge. The safety recall began on december 23, 2010. Owners may contact dtna at 1‑800‑547‑0712.

Recall number 10V322000 · Recall details

What is wrong

Dtna is recalling certain model year 2005 through 2011 freightliner business class c2, fccc b2 chassis, s2 chassis, and mc chassis manufactured beginning january 19, 2005 through april 16, 2010. The stop lamps may be intermittent during light brake applications.

Risk

The stop lamps may not properly indicate that the service brakes are applied which may lead to a crash without warning.

Remedy

Dtna will notify owners and repairs will be performed by dtna dealerships free of charge. The safety recall began on may 27, 2011. Owners may contact dtna at 1‑800‑547‑0712.

Recall number 10V178000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2010 thomas built school buses and freightliner business class m2 medium duty trucks and freightliner custom chassis s2 vehicles manufactured between april 21 and july 2, 2009, equipped with trw igen 3 intermediate steering columns. The weld around the steering shaft tube that secures the spline tube to the intermediate tube may be mislocated (I.e., not fully over the seam created when the tubes are pressed together.)

Risk

Mislocated welds may result in torsional and axial strength falling below acceptable levels. This condition could result in separation of the steering column, loss of steering control and a vehicle crash without warning.

Remedy

Daimler trucks will notify owners and the vehicles will be repaired free of charge. The safety recall began on november 6, 2009. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 09V355000 · Recall details

The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles had allegedly experienced a fracture of one or more support brackets resulting in an unsecured air brake reservoir.This could result in a loss of air pressure necessary for proper service brake application and a potential road hazard if the reservoir separates from the vehicle in operation.By letter dated August 15, 2012, Daimler Trucks North America LLC (DTNA) has notified ODI that it has initiated a safety recall (identified by NTHSA Recall No. 12V‑405 and DTNA Recall No. FL-631) to address a safety defect in approximately 1,663 model year (MY) 2009 through 2012 Freightliner 114SD, Business Class M2, Cascadia, Coronado, Sterling 9500 and Western Star 4700 trucks manufactured from July 7, 2008 through December 15, 2011, originally equipped with a specific perpendicular oriented air brake reservoir support bracket (P/N 12-22981-000).To date ODI is unaware of any bracket failures that resulted in a complete separation of the reservoir from the vehicle.Affected owners will be notified by DTNA beginning October 15, 2012 and affected vehicles will have the subject air brake reservoir support brackets replaced with a more robust bracket.Repairs will be performed by DTNA authorized service facilities.Copies of DTNA's reimbursement plan for pre-notification remedies will be submitted to ODI as a supplemental report when available.Accordingly, this investigation is closed.

PE12018

This investigation was opened after ODI was contacted by a fleet alleging that in certain situations, such as a light brake peal application during a low speed operation, the brake lamps fail to illuminate on the rear of the bus.ODI confirmed the problem with two fleets.On April 29, 2010, Daimler filed a defect report concerning this issue. The stop lamps may be intermittent during light brake applications.They are still evaluating the remedial program and will furnish this information to ODI when it is available. This safety recallresolves the issue raised by this investigation. Hence, this investigation is closed.

PE10007