2005 Freightliner Century Class problems

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:

Risk

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1‑800‑547‑0712, or contact Kidde customer service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Recall number 17V810000 · Recall details

What is wrong

Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.

Risk

An oil leak may result in a fire.

Remedy

Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1‑800‑447‑4986 or daimler trucks at 1‑800‑547‑0712.

Recall number 09V366000 · Recall details

What is wrong

Daimler trucks is recalling 62,000 my 2005-2007 freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.

Risk

If a leak continues undetected under certain conditions, fuel may ignite at a hot engine surface and/or fuel may be spilled on the road surface.

Remedy

High pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on july 9, 2008. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 08V113000 · Recall details

What is wrong

On certain trucks, the protective cover for the cab power distribution model (pdm) may be missing or improperly installed.

Risk

If the protective cover is missing or not positioned correctly, any water intrusion from an open window or windshield leak may seep through the upper dash cover seam and drip onto the pdm. Water on the pdm circuits may cause a short circuit resulting in a fire that could cause personal injury.

Remedy

Dealers will install a new cover free of charge. The recall began on december 18, 2006. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 06V190000 · Recall details

On April 23, 2018, the National Highway Traffic Safety Administration (“the federal safety agency”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). the federal safety agency subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. the federal safety agency and DTNA entered into a Consent Order on December 29, 2020, to resolve the federal safety agency’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to the federal safety agency, and DTNA failed to submit field reports to the federal safety agency as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. the federal safety agency and DTNA agreed to a two-year term for the Consent Order—with an option for the federal safety agency to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with the federal safety agency to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with the federal safety agency to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to the federal safety agency; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with the federal safety agency. On December 22, 2022, the federal safety agency extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, the federal safety agency expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with the federal safety agency during the term of the Consent Order. the federal safety agency addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by the federal safety agency as to DTNA’s performance under the Consent Order.

AQ18002

A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v‑357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed.

PE09040

Odi's investigation of the subject power steering pump has found that, with over five years of operational exposure, there have been no pump failures that resulted in loss of power steering assist while the vehicle was being driven on the road or any sudden drop off in the power steering assist at any time.there are no crashes or injuries.these reduction in assist events have only occurred during backing or parking maneuvers.freightliner and trw appear to have acted responsibly in providing information to customers and dealers regarding safe maintenance and repair procedures for power steering pumps that have experienced a reduction in speed of steer.freightliner's field service bulletin, fsb 46-38, is a diagnostic procedure for determining if the trw power steering pump is responsible for reduced power assist and describes corrective actions that should be taken once the determination is made.the corrective actions are:replace the spool valve assembly (vehicles built prior to 1/1/05) or, replace the power steering pump (vehicles built after 1/1/05).a safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.the closing of this investigation does not constitute a finding by the federal safety agency that no safety-related defect exists.the agency reserves the right to take further action if warranted by the circumstances.for more detailed information see document file.

PE08009

As a result of the odi investigation, freightliner has agreed to recall (number 07v‑289) all of the vehicles manufactured with steering columns potentially missing welds.the recall remedy will involve inspecting the recalled vehicles for missing welds and if found replace the steering column.early warning aggregate data submitted to the federal safety agency by freightliner suggested that a steering problem (ewr code 01) existed for the 2004 and 2005 century and columbia class vehicles.the count of field reports submitted for the first quarter of 2006 was higher than the average of the previous 6 quarters for the aggregate steering data.odi's further review of the ewr data foundfield reports that described steering column failures as a result of steering column welds cracking or breaking.information received from freightliner detailed failures of the steering columns on the subject vehicles.these failures were the result of missing and cracked welds on the steering column assembly.during testing of vehicles containing defective steering columns, odi determined that weld failures in the steering column create a situation where the vehicle becomes difficult to steer or may startle the driver upon failing, thus presenting a safety risk.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed.

EA07002

Early warning aggregate data submitted to the federal safety agency by freightliner suggests that a steering (ewr code 01) problem exists for the 2004 and 2005 century and columbia class vehicles.the count of field reports submitted for the first quarter of 2006 was significantly higher than the average of the previous 6 quarters for the aggregate steering data.further review of the ewr data foundfield reports that described steering column failures as a result of welds cracking or breaking.information received from freightliner details a number of steering columnfailures on the subject vehicles.these failures were the result of missing and cracked welds on the steering column assembly.an engineering analysis (ea) is warranted to determine if the weld failures in the steering column create a situation where the vehicle becomes difficult to steer or startles the driver presenting a safety risk.

PE06033