2006 Freightliner Coronado problems

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:

Risk

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1‑800‑547‑0712, or contact Kidde customer service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Recall number 17V810000 · Recall details

What is wrong

Daimler trucks (dtna) is recalling certain model year 2006-2013 freightliner, sterling, and western star vehicles, equipped with detroit diesel epa07 and epa10, dd13 and dd15/16 engines, manufactured from january 20, 2006, through february 20, 2012. The pump to rail high pressure fuel line support system used on these engines is sensitive to assembly torque and may be damaged during service work. As a result of other repairs, the line supports may loosen, potentially leading to fuel line cracking and a fuel leak.

Risk

A fuel leak could create a road hazard, increasing the risk of a crash. Also a fuel leak in the presence of an ignition source can result in a fire.

Remedy

Dtna will notify owners, and where necessary, the high pressure fuel line support system will be replaced by dtna authorized service facilities, free of charge. The safety recall began on april 27, 2012. Owners may contact dtna at 1‑800‑547‑0712.

Recall number 12V074000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Risk

The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Remedy

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 11V514000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2006-2012 freightliner business class m2, cascadia, century, columbia, coronado and sterling a-line vehicles built with meritor wabco electronic stability control (ESC) system manufactured from september 15, 2005 through september 1, 2011. Under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (ESC) system. This might cause the ESC to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.

Risk

If the driver is slow to react during this ESC intervention, the vehicle may deviate from the intended line of travel increasing the risk of a crash.

Remedy

Daimler trucks will notify owners, and dealers will replace the ESC module with the appropriate software version as necessary, free of charge. An interim owner notification will be mailed on or about november 21, 2011. The date for availability of the final remedy is subject to validation testing and parts availability. The safety recall began on march 28, 2012. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 11V465000 · Recall details

What is wrong

Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.

Risk

An oil leak may result in a fire.

Remedy

Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1‑800‑447‑4986 or daimler trucks at 1‑800‑547‑0712.

Recall number 09V366000 · Recall details

What is wrong

Daimler trucks is recalling 62,000 my 2005-2007 freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.

Risk

If a leak continues undetected under certain conditions, fuel may ignite at a hot engine surface and/or fuel may be spilled on the road surface.

Remedy

High pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on july 9, 2008. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 08V113000 · Recall details

What is wrong

On certain truck-tractors equipped with holland simplex se or se ii fifth wheels, the latch lever pivot bolt assembly may have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot may cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.

Risk

There is a possibility that the fifth wheel may fail to latch without the driver's knowledge. When the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.

Remedy

Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on january 3, 2008. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V530000 · Recall details

What is wrong

On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod may be damaged in a sharp turn. Excessive tie rod angles may loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly may fracture and separate.

Risk

A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Remedy

Dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on july 8, 2008, and will be mailed in phases through december 31, 2008. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V403000 · Recall details

What is wrong

On certain trucks equipped with rack and pinion steering, the tie rod arms may have been incorrectly installed. The threaded end of the ball socket assembly may fracture and separate.

Risk

A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Remedy

Dealers will inspect for installation of the steering arms. Steering components will be replaced on trucks that have incorrectly installed tie rod arms. The recall began on may 1, 2008. Owner may contact freightliner at 1‑800‑547‑0712.

Recall number 07V400000 · Recall details

What is wrong

Certain freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between july 2002 and july 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Risk

These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Remedy

Freightliner will notify owners and repair the vehicles free of charge. The recall began on january 11, 2008 to freightliner, sterling, and freightliner custom chassis owners; to thomas built bus owners on february 1, 2008. Owners can contact freightliner at 1‑800‑547‑0712.

Recall number 07V302000 · Recall details

What is wrong

Certain freightliner school buses and trucks manufactured from october 23, 2004, to march 21, 2006. During the steering column manufacturing process two welds may have been missing.

Risk

Columns with two welds missing may fatigue and fracture and allow the steering wheel to progressively be moved out of its normal position which may cause the steering to respond differently than expected. If this condition is ignored, a crash may occur.

Remedy

Freightliner will notify owners and inspect and repair the affected vehicle free of charge. The recall began on august 30, 2007. Owners can contact freightliner at 1‑800‑547‑0712.

Recall number 07V289000 · Recall details

What is wrong

On certain trucks and motor home chassis, the top flange of the front axle I-beam may fatigue and fracture.

Risk

Driver may experience loss control of the vehicle and a crash could occur without prior warning.

Remedy

Dealers will inspect and replace the front axle assembly. The recall began on march 15, 2006, for phase I. Phase 2 will begin during august 2006. This recall is being conducted in two phases. Phase I will replace the complete axle assembly; and phase ii will replace the axle beam and steering knuckles. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 05V551000 · Recall details

On April 23, 2018, the National Highway Traffic Safety Administration (“the federal safety agency”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). the federal safety agency subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. the federal safety agency and DTNA entered into a Consent Order on December 29, 2020, to resolve the federal safety agency’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to the federal safety agency, and DTNA failed to submit field reports to the federal safety agency as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. the federal safety agency and DTNA agreed to a two-year term for the Consent Order—with an option for the federal safety agency to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with the federal safety agency to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with the federal safety agency to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to the federal safety agency; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with the federal safety agency. On December 22, 2022, the federal safety agency extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, the federal safety agency expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with the federal safety agency during the term of the Consent Order. the federal safety agency addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by the federal safety agency as to DTNA’s performance under the Consent Order.

AQ18002

On november 19, 2007, freightliner filed defect report 07v‑530 which outlines a safety recall program to notify the affected owners and correct the affected vehicles.

PE07047

As a result of the odi investigation, freightliner has agreed to recall (number 07v‑289) all of the vehicles manufactured with steering columns potentially missing welds.the recall remedy will involve inspecting the recalled vehicles for missing welds and if found replace the steering column.early warning aggregate data submitted to the federal safety agency by freightliner suggested that a steering problem (ewr code 01) existed for the 2004 and 2005 century and columbia class vehicles.the count of field reports submitted for the first quarter of 2006 was higher than the average of the previous 6 quarters for the aggregate steering data.odi's further review of the ewr data foundfield reports that described steering column failures as a result of steering column welds cracking or breaking.information received from freightliner detailed failures of the steering columns on the subject vehicles.these failures were the result of missing and cracked welds on the steering column assembly.during testing of vehicles containing defective steering columns, odi determined that weld failures in the steering column create a situation where the vehicle becomes difficult to steer or may startle the driver upon failing, thus presenting a safety risk.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed.

EA07002