Stability track Cameondoing 50mph transmission geared down motor shut down on and off yes it's available problem not found by dealer took to 2 different ones stability track comes on side lights stay on and off press brakes it shut down turn left it shut down motor running in park put in reverse shut down Will drive and run sometimes but gets worse
2016 GMC Canyon steering complaints
Page 4 of 7: complaints 71 to 100 of 181, newest first, as owners wrote them.
The vehicle’s power steering and stability control (Stabilitrak) have stopped working suddenly several times over the past two weeks. There have been no warnings leading up to the loss of power steering .This has happened while I have been traveling at highway speeds as well as in the middle of making a turn and has nearly led to crashes on a couple of occasions. It has also happened at lower speeds as well as upon starting the vehicle with no rhyme or reason. The vehicle has not been inspected for this issue but is available for inspection if necessary. I understand that this same issue has also led to a recall on the previous year’s model (2015 GMC Canyon).
The contact owns a 2016 GMC Canyon. The contact stated while driving at approximately 60 MPH, the power steering failed. The contact stated that the ABS and "traction control" warnings were illuminated. The contact stated that he pulled off of the road and turned the vehicle off and on several times and the power steering regained functionality. The contact stated that the power steering failure had been intermittent initially but had become a recurring failure that would occur at any speed. The contact had taken the vehicle to a local dealer, where it was diagnosed showing a C0545 code (steering wheel torque sensor malfunction) and determined that the steering gear assembly needed to be replaced. The vehicle had not been repaired. The manufacturer had been informed of the failure. The contact had researched online and related the failure to the federal safety agency Campaign Number: 21V213000 (Steering). The failure mileage was approximately 60,000.
The contact owns a 2016 GMC Canyon. The contact stated while driving approximately 75 MPH, the stabilitrak warning light illuminated and a chime sounded. Additionally, the vehicle lost power steering functionality. The contact was able to pull to the side of the road. The contact stated that he turned off and restarted the vehicle, and the power steering became functional. The dealer was not notified of the failure. The vehicle was not diagnosed nor repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 160,000.
Hello I own a 2016 gmc canyon truck It has 49000 miles on it I recently I'm experiencing some power steering issues When the car is running, the power steering stop working and the wheel is really hard to turn any direction What I found online this model has issues and recalls with the power steering. Something like power steering control module This is my VIN number [XXX] And I haven't received any information by mail or something about this recall Thanks This is my email [XXX] Thanks INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2016 GMC Canyon. The contact stated while driving approximately 50 MPH, the vehicle lost power steering functionality. The power steering and stabili-trak warning lights were illuminated. The contact called the dealer and was informed that the vehicle was not covered under a recall. The vehicle was taken to an independent mechanic, who stated that the failure was due to the gear torque sensor. The manufacturer was not contacted. The failure mileage was approximately 73,000.
The contact owns a 2016 GMC Canyon. The contact stated while driving approximately 50 MPH, the steering failure message was displayed on the instrument panel. The contact stated that the steering wheel became difficult to turn in either direction. The contact pulled over and turned off and restarted the vehicle and the vehicle returned to normal functionality. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The approximate failure mileage was 150,000.
Sudden loss of power steering. Happened to me a lot a times. Sometimes when I driving on a freeway already took it to the GMC. Paid money and the problem is not solved.
Aug 31, 2023 Power steering failure. Aug 31, 2023 I started the vehicle, warning bell chimed, dash warning to "service power steering" appeared. Then dash warning, of vehicle stability control appeared. Steering wheel was extremely difficult to turn. I shut the vehicle off and restarted, which momentarily cleared the problem. I backed out of the driveway and the problem described above returned along with the inability to turn the wheel. I shut the ignition off and restarted the truck, which cleared the problem. I attempted a short drive, and the problem (described above) returned within a 1/4 mile at a speed of 30 mph. I managed (with difficulty) to safely drive the vehicle to the shoulder as I was driving in a straight line at the time of the incident. No mechanic or service personnel have inspected or diagnosed this problem as yet. I have scheduled an apptointment with my mechanic. In my opinion the vehicle is unsafe to operate at this time both to the occupants and the general public. No recalls are currently issued on the vehicle, although the vehicle manufacturer has had prior issues with the 2015 model which mirror the issues on the 2016 model which was recognized by GMC as a safety issue in regards the prior year, the manufacturer (gmc) has not recognized the 2016 issue as a safety problem and subsequent safety recall has not been issued.
The stabilitrak power steering system fails randomly at high speeds causing loss of control and risk of crashing. This is a known problem to GMC and a recall was issued for 2015 canyon trucks requiring the dealer to replace the steering gear torque sensor cover assembly free of charge due to defective electrical connections within the assembly. They have excluded 2016 and it is a serious problem. This problem is widely reported on GMC and Chevy forums and Reddit for 2016 models. It’s essentially all over the internet for anyone willing to simply look. The error “loss of power steering, proceed with caution” appears as does the lane departure light and check engine light. The errors “Stabilitrack has failed” “Torque sensor failure” Fault Code C0545 also appear. After shutting the car off and restarting , all error codes and lights disappear and do not appear on a code reader. The issue then happens sporadically again at very dangerous times. It is the exact same issue as the 2015 recall # 21V213000 issued on Mar 25, 2021 but GMC refuses to help.The problem is a defective torque censor connection. Please help. I don’t want to die on the freeway.
While driving at 70 MPH on the interstate approaching a bend in the path of travel the "service traction control" warning was displayed on the instrument panel display and just after that the electronic power steering stopped working causing a near collision with a vehicle in the adjacent lane. The local GMC dealership noted a recall for the 2015 Canyon model for the steering gear torque sensor cover assembly to be replaced due to corroded electrical connections. The number (15595) recall was not associated with my VIN but should be added as part of the vehicles in the recall as it is experiencing the same issues.
The contact owns a 2016 GMC Canyon. The contact stated while driving 65 MPH, the stability control and power steering warning lights illuminated. The vehicle then lost stability control functionality and the steering wheel became firm. The contact stopped on the side of road and turned off the vehicle. The vehicle was restarted and operated normally. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that the vehicle needed to diagnosed. The failure mileage was 116,000. The VIN was not available.
Vehicle Stability Control systems light comes on sporadically and stalls the power steering. In other words, the power steering turns off at any time and dangerously on a highway, when the Vehicle Stability Control lights comes on the dashboard. The first diagnosis (May27, 2023) of the above issue was performed at Green Brooks, a Certified NJ GMC Service Dealership yielded no results from their inspection. A second diagnosis was needed due to the vehicle's malfunctioning danger to me and other drivers on the road. The Certified GMC Service Dealership Ewing Buick/GMC TX diagnosis (June 12, 2023) showed a "STEERING GEAR INTERNAL TORQUE SENSOR" costing two thousand one hundred and eight dollars and fifty cents ($2,108.50) to complete. The codes were C0545 00 stored in DSCM followed by S14849247 requiring Steering Gear Replacement. The total cost including labor cost was two thousand seven hundred and ninety dollars and eighty-eight cents ($2,719.88).
The problem: the power steering disables at high speeds suddenly due to a potential poor electrical connection within the steering gear assembly. The hazards: a loss of power steering makes it more difficult for me to maintain control of my vehicle and in turn increases my risk of a crash. This problem requires steering inputs with increased effort. It clears with a power cycle to the truck but then reoccurs randomly.
While driving in excess of 40mph, my truck experience two warning lights "Service: Stabilitrak" and "Service: Power Steering Drive With Care", and my power steering immediately went out and my steering was very difficult and had to maneuver off the road and through traffic to the side of the road, and was very fearful for my safety and others around me on the road when this happened. I could not turn the vehicle without a tremendous amount of effort. After pulling to the side of the road, I immediately shutoff the vehicle and restarted and the steering and messages were gone. I began driving down the road and it happened again within 5 minutes. I shutdown and it reset again. I then proceeded to the GMC Dealer in West Chester Pa (Faulkner) to determine if they are familiar with this problem and they said they've never heard of this and couldn't find anything wrong with the truck otherthan a couple Codes unrelated to any Steering problems.
The Power starting keeps going out while driving it. Once vehicle is turned off and back on it resets and works again. There is active recall for this exact issue but only in 2015 models and mine is a 2016 so told it isn’t a part of recall. It happened a few times several months ago but GMC service center couldn’t get problem to recreate and I didn’t have good documentation for the few times it had happened. GMC then offered free onstar for several months to try to help track problem. It hadn’t happened in last several months until Friday. It has now happened 7 times in last 4 days. On star sent me two reports indicating a code of U0240 with ABS system failure code. I took videos and pictures of the dashboard with what was showing. There is service message saying “power stealing drive with care” and “stabilitrak” service message too. GMC not getting me in for another week. I have a new 16 year old driver who drives this vehicle and it’s so unsafe! I don’t understand how I keep being told my vehicle is not included in the recall but it’s the same issue. I have to keep taking pictures and videos and pushing onstar button when it happens.
Power steering fails during driving. This happened frequently just like the 2015 model but the federal safety agency fails to do anything. It happened 3 times on this one day
-The power steering has failed and malfunction is inline for the type of recall on other GMC Canyons and Chevy Colorado trucks of this year and years before and after. Vehicle is available for inspection. -The steering does not work and steering wheel can be moved which could cause an accident. -It has not yet been inspected -No warning lamp prior to failure. It came on suddenly and when I tried to move steering it did not work. This appeared on the afternoon of 3/7/2023.
The contact owns a 2016 GMC Canyon. The contact stated upon starting the vehicle, the vehicle lost power steering functionality. A warning message indicating a power steering failure was displayed. The contact was able to drive the vehicle by using physical force to steer the vehicle. The contact stated that upon starting the vehicle the next day, the vehicle responded as needed. However, upon test driving the vehicle, the failure recurred. The vehicle later responded as needed and was taken to the dealer to be diagnosed and the contact was informed that the steering gear assembly needed to be replaced. The vehicle was not repaired. The contact related the failure to GMC Technical Service Bulletin Number: 15595A and GMC Campaign Number: N202325410. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 92,000.
We recently purchased this vehicle used from a dealer. The power steering fails while driving. This has occurred 4 times in the first 100 miles.
multiple times while driving, whether on main roads or the highway and in various condition, my Traction Control lights come one and stabilizer lights as well then the computer shows Power Steering Failure. I've lost power steering 3 times and it's almost caused 2 accidents. The 2015 GMC Canyon was recalled for this matter and the 2016 model uses the same components. Why isn't the 2016 being recalled? Many GMC Canyon Forums online complain of the same issue. This is going to result in a fatal accident for someone. Please take action!
Power steering will randomly fail while driving. the federal safety agency recalled 2015 but did nothing for 2016 which is still having the same problems
Three times we have gotten an alarm that there is a steering malfunction and to drive carefully. We experienced a loss of power steering. We have had it in for service twice. The first time, the dealer reprogrammed the computer, which did not solve the problem. The second time, they said they needed to replace the steering wheel torque sensor, which they tried to order, but said it is not currently available.
My power steering suddenly went out on the highway. Has now happened a couple times. Stabilatrak also errored. Both times it showed an error message in the display saying "Service Power Steering". There have been no signs of the power steering going bad or noises from the power steering pump to indicate it is mechanical. If I stop the car and restart it the problem goes away.
The contact owns a 2016 GMC Canyon. The contact stated that while driving at various speeds, the vehicle lost power steering assist causing the steering wheel to become very difficult to turn in either direction. During the failure, the power steering and traction control messages were displayed. After restarting the vehicle, the failure was self-corrected and the vehicle operated as designed. The contact indicated that the failure had become more frequent. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure. The failure mileage was 65,000.
My 2016 GMC Canyon had a power steering failure and stability warning light while turning off highway with my grandson in the truck. Power steering returned after turning truck off and restarting. The next day, I took it to Rogersville Chevrolet to check and change oil since it was due, however, they could not find anything other than a stability track warning in history. 2 weeks later happened again repeatedly. Dropped it off at dealership, dealer states steering needs total replacement. It is available to inspect, I have not had it replaced yet, dealer asking for over $2000.00 to fix it. Poses safety hazard due to unexpected loss of steering at anytime. Also, this is the same issues that was the subject of recall in the 2015 GMC Canyon. Power steering intermittently failing making steering very difficult without warning beforehand. Warning light appears post failures.
My vehicle a 2016 GMC Canyon loses power steering making it hard to control and it happens driving out of the garage but also sometimes without warning while driving it. One time it happened on a curve and I almost had a headon collision. Dealership, Von Holsen GMC in Ashland Wi. said it is the identical problem that is in a recall for 2015's. Diagnosis by the dealership confirmed that this is the identical to the recall. But they will not cover it because mine is an early 2016. I request that the recall be expanded as they do not have all the vehicles that are effected. Thank you , [XXX] Cable, Wi. 54821 [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Power steering suddenly goes out while driving. I get a ringing and visual notification notifying me that stabilitrak and power steering are not working properly. I have to steer the truck manually. The next day it drives correctly again for 5-10 miles then the exact same issue reappears, and I lose all power steering while on the road at full speed. This issue is recalled in 2015 GMC Canyons, but not on my 2016 model. Please address this issue asap. I'm being told I have to have the whole rack replaced for $2400.
The power steering has locked up twice. Once on 9-12-2022 and again on 9-13-2022. the first time was in a school zone going 25 mph. The 2nd time was in the same area goin 50 mph. The 2nd time it locked up, I recovered before hitting a guard rail. I have an appointment with Wyatt Johnson GMC Buick in Clarkesville, Tennessee on Saturday 9-17-2022 to diagnose the problem. A message to service Stabilitrak and service power steering drive with care came on.
The contact owns a 2016 GMC Canyon. The contact stated while driving at approximately 35 MPH, the vehicle lost power steering functionality. The stabili trac warning light was illuminated. The contact was able to drive safely to his residence. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The contact related the failure to the federal safety agency Campaign Number: 21V213000 (Steering). The approximate failure mileage was 58,000.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 GMC Canyon?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history