Consumer received recall letter 99v193000 concerning ABS brakes. Contacted the dealer, dealer insisted no parts were available to correct the recall problem.
1991 GMC Jimmy: ABS light or ABS activating
40 of the 118 complaints about the 1991 GMC Jimmy describe ABS light or ABS activating.
- owner complaints
- 40
- of this car's complaints
- 34%
- recalls
- 1
Is there a fix? There is 1 recall for this area of the car. See below
ABS light or ABS activating by model year
What owners say
Electric hydraulic unit keeps failing, causing ABS light to stay on. Consumer has replaced the same exact part 3 times. Cause is unknown.
Consumer has been using manuel braking because ABS failed. Consumer contacted manufacturer, but the VIN for recall 99v19300/manufacturer's recall 99041 didn't register.
Consumer is not able to make an appointment with dealer or manufacutrer for recall repairs of ABS brakes. Consumer has called on several occasions ,and left messages, but there was no return call back from dealer.
While driving at 35 MPH and going through some water ,applied the brakes and vehicle skidded. Abs light came on and won't go off.
When applying the ABS brakes pedal goes to the floor, causing extended stopping distance. Please give any further details.
Ea94038, ABS braking system; when applying the brakes during braking, no wet pavement, the brake pedal went to the floor, and extended stopping distance was required. The dealer is aware of problem. Owner was able to correct the problem, using a code tester. The sensor on the left front wheel will need replacement.
Random ABS failures, brakes would not function on first application, ABS unit replaced.
The brakes failed completely while driving to work when the vehicle was less than 6 months old. I recently read a comsumer reports article dated nov. 1997 that exactly describes the brake failure that resulted in an accident with significant damage to both vehicles. The failure occured suddenly woth no warning, however the next day the brakes check out fine. I suspect the problem is associated with the ABS system computer.
Abs brakes; when applying brakes in normal conditions, the pedal went half way to the floor and brakes failed to stop vehicle, causing an extended stopping distance before vehicle came to a stop. Please provide details.
Abs failed.
Abs brakes failed four times, once resulting in a collision.
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with ABS (antilock braking system) manufactured from september 1989 through august 1996. Under certain driving conditions the switch which signals the ABS system whether the vehicle is in 2-wheel or 4-wheel drive can malfunction causing increased stopping distances during ABS stops while in the two-wheel drive mode.
- Risk
- If this occurred at a time when minimum stopping distance was required, a vehicle crash could occur without prior warning.
- Remedy
- Dealers will replace or repair the 4-wheel/2-wheel drive switch.
Recall number 99V193000 · Recall details
Questions about the 1991 GMC Jimmy abs
Is ABS light or ABS activating a common problem on the 1991 GMC Jimmy?
40 of 118 owner complaints about the 1991 GMC Jimmy (34%) mention ABS light or ABS activating. The model year with the most reports is 1994.
Is there a recall or service bulletin for this on the 1991 GMC Jimmy?
There is 1 recall and 0 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 1991 GMC Jimmy
VIN decoder
See the problems and recalls for an exact car
Buying a used 1991 GMC Jimmy?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history