We were given a 1992 gmc jimmy by my father, and along with the car came all the corresponding paperwork. Included in the paperwork was a "safety recall notice" from gmc dated may 2000, recall # g99041-s. This letter describes an ABS brake failure resulting in abnormal stopping distances and the required repairs. When we got the car, I asked my father if the repair was performed and he stated "that when he called the dealership for an appointment they had no record of the recall so the repair was not performed". Since we've taken ownership of the vehicle, we've experienced a brake failure as described in this letter and wish to correct the problem that gmc has indicated. I've tried calling our local dealership and have received the same response as my father did, "there's no recall with that number and our VIN doesn't show any recall notices". I've also called gmc @ 1800-462-8782 and spoke to a tyhessia smith (1‑866‑542‑4368 extension 45904, service request # 1-283317144), she also has no record of the recall. Having this recall notice along with a brake failure seems to require prompt action from gmc, but it seems I'm getting little assistance from them.
1992 GMC Jimmy: ABS light or ABS activating
47 of the 121 complaints about the 1992 GMC Jimmy describe ABS light or ABS activating.
- owner complaints
- 47
- of this car's complaints
- 39%
- recalls
- 1
ABS light or ABS activating by model year
What owners say
I received a recall notice from general motors during the summer of 2000. The recall notice was created by the nation traffic and motor vehicle act and was titled campaign #g99041-s. I sceduled my vehicle for the upgrade and had this service perfomed on 09/20/00. Approximately two weeks after the upgrade the vehicle was placed in four wheel drive (push button type) and would not release after several attempts. I reviewed the vehicle manual and walked through the process of releasing the 4wd if it became locked up and fortunately it worked and released. I made another appointment with the original dealer. His technicians reviewed the vehicle on 10/04 and said that they had plugged in a vacumn wrong and now everything would be ok. Approximately two months later I was driving the vehicle and had the first opportunity to engane the ABS unit. It engaged and worked as it had four about eight years. The following day both the ABS and brake dashboard warning lights illuminated and stayed illuminated. Because of th ebrake light being illuminated and the fact that the vehicle had the original back brake shoes I thought that I changed the back shoes that light issue might go away. After changing the back brake shoes, installing spring kits, and turning the drums, I reassembled, adjusted the shoes and "tried the pedal" in my garage. Both the standard brake pedal and the emergeny brake pedals responded close to the top of their positions. At this time I started the vehicle and the brake pedal immediatly "fell" to the floor. The pedal pumped up but after several seconds again fell to the floor. I purchased a new master cyinder from napa and installed it. Only after a complete system beeding did I regain any brake pedal. Both the ABS and brake light stayed "on". Back to the dealer, reported defective ABS ($1400.00) I feel the original recall and dealer work created brake failure.
99v 193000/ABS: while applying brakes in wet conditions at 35-40 MPH and during a sudden stop/emergency situation, ABS brakes engage briefly and cut off. This causes the brake pedal to go to the floor, and vehicle would continue without brakes. Dealer/manufacturer contacted. Feel free to provide further details.
Vehicle experienced failure of the recall component (99v‑193) ABS system, resulting in vehicle accident and injury.
While driving vehicle can't go fast because it makes a roaring noise. The only way to get it to stop is to almost come to a complete stop before the noise will stop. Consumer thinks it's the brakes. Abs light stays on. *ak
Consumer ABS sensors failed causing the ABS dash light to illuminate and resulted in low brake pedal and extended stopping distance. Nlm
Vehicle experiences ongoing problem with ABS failing to operate. Vehicle been inspected by independent repairs shop, and nothing could be found. Dealer was not notified.
Abs brakes make vehicle turn to the right. Also, ABS light stays on.
Abs brakes are not working properly.
Would hear a hissing sound when ABS brakes were applied. The ABS light would come on & stay. Pedal goes to floor. When released makes noises. Been to dealer & informed by mechanic ABS line was worn & needed replacing.
When ABS brakes are applied, they would completely fail to work. The brake pedal goes to floor. Vehicle would experience extended stopping distance. Would have to use the emergency brake to stop vehicle. Will be taking vehicle to dealership to have mechanic check it out.
Abs brakes consistantly intermitantly kick in delaying stop time- ongoing problem- dealers cannot find defect- sometimes antilock light flashes--no codes are stored- have replaced sensors on wheels and cleaned brake dust from rear-- no change.
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with ABS (antilock braking system) manufactured from september 1989 through august 1996. Under certain driving conditions the switch which signals the ABS system whether the vehicle is in 2-wheel or 4-wheel drive can malfunction causing increased stopping distances during ABS stops while in the two-wheel drive mode.
- Risk
- If this occurred at a time when minimum stopping distance was required, a vehicle crash could occur without prior warning.
- Remedy
- Dealers will replace or repair the 4-wheel/2-wheel drive switch.
Recall number 99V193000 · Recall details
Questions about the 1992 GMC Jimmy abs
Is ABS light or ABS activating a common problem on the 1992 GMC Jimmy?
47 of 121 owner complaints about the 1992 GMC Jimmy (39%) mention ABS light or ABS activating. The model year with the most reports is 1994.
Is there a recall or service bulletin for this on the 1992 GMC Jimmy?
There is 1 recall and 0 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 1992 GMC Jimmy
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 GMC Jimmy?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history