GMC Yukon XL fuel pump problems

Filed Nov 4, 2026 · Electrical, Engine · MI

INCIDENT 2: Total Electrical / Power System Shutdown Component / System Failed: Electrical / Power Control System (Auto-Stop/Start System) Failure Description: Total loss of electrical power causing the main dashboard and display screen to go completely dark, stalling the vehicle during an autostop event at a traffic light and preventing the engine from restarting. Safety Risk: Sudden total electrical shutdown leaves the vehicle completely dead, unresponsive, and immobilized in active traffic lanes/intersections, creating a high risk of rear-end or multi-vehicle collisions. Dealer / Repair Shop Confirmation: Customer complaint and active fault codes confirmed by dealership service department following standard maintenance schedule. Warning Symptoms: Display screen went blank; failure occurred instantly during autostop/traffic light stop without prior warning. Inspection Availability: Vehicle and affected systems are available for inspection upon request. INCIDENT 3: Fuel Pump Driver Module (FPDM) Failure Component / System Failed: Fuel Pump Driver Module (FPDM - Part #13554821) / Engine Control Module (ECM) Communication Failure Description: Total loss of communication between the ECM and FPDM, causing the engine to abruptly die while idling at a traffic light. Subsequent attempt to restart using push-to-start produced a severe mechanical screeching noise. Safety Risk: Unexpected stall in active traffic leaves the vehicle stranded and unable to restart safely, exposing occupants to collision hazards. Dealer / Repair Shop Confirmation: Confirmed by Service Technician. Diagnostic Code P129F ("ECM lost communication with fuel pump driver module") logged; verified power and ground failures at the module. Replaced FPDM (Part #13554821). Warning Symptoms: None prior to failure. Sudden engine shutdown followed by screeching sound on attempted restart. Inspection Availability: Vehicle and replaced module are available for inspection upon request.

Filed Nov 4, 2026 · Engine, Fuel system · MI

INCIDENT 3: Fuel Pump Driver Module (FPDM) Failure Component / System Failed: Fuel Pump Driver Module (FPDM - Part #13554821) / Engine Control Module (ECM) Communication Failure Description: Total loss of communication between the ECM and FPDM, causing the engine to abruptly die while idling at a traffic light. Subsequent attempt to restart using push-to-start produced a severe mechanical screeching noise. Safety Risk: Unexpected stall in active traffic left the vehicle stranded and unable to restart safely, exposing occupants to collision hazards. Dealer / Repair Shop Confirmation: Confirmed by Service Technician. Diagnostic Code P129F ("ECM lost communication with fuel pump driver module") logged; verified power and ground failures at the module. Replaced FPDM (Part #13554821). Warning Symptoms: None prior to failure. Sudden engine shutdown followed by screeching sound on attempted restart. Inspection Availability: Vehicle and replaced module are available for inspection upon request.

Filed Oct 27, 2026 · Electrical, Engine · TN

**Mileage at repair:** 76,165 miles **Component:** Fuel Pump Power Control Module While driving my 2021 GMC Yukon XL on [XXX] on a treacherous stretch decending [XXX] the engine unexpectedly stopped running, resulting in a complete loss of propulsion. This occurred on a section of interstate where there was no safe shoulder or suitable location to pull off the roadway. The unexpected failure created an extremely dangerous situation, exposing me and other motorists to the risk of a serious collision. The vehicle was subsequently towed, diagnosed and repaired by Darrell Waltrip Buick GMC in [XXX]. The dealership documented diagnostic trouble code P129F, "Fuel Pump Driver Control Module Fuel Pump Speed Signal Incorrect." The technician verified that the control module had proper electrical power, that there was no pin damage or connector fitment issue, and that the module required replacement. The dealership's written diagnosis specifically acknowledges that a failing fuel pump driver module can cause the engine to shut down. The original factory-installed module was replaced with GM part number 13554821, and the vehicle was subsequently tested and confirmed to operate correctly. The repair was performed at no charge, and GM provided a loaner vehicle while the replacement part was unavailable. I am particularly concerned that General Motors has previously acknowledged this same type of safety hazard under the federal safety agency Safety Recall 21V‑739 (GM N212332040), involving fuel pump power control modules on certain 2021 GM full-size SUVs. That recall identifies unexpected engine stalling and increased crash risk as consequences of module failure. My experience demonstrates the potentially catastrophic consequences of this failure in actual highway operation. I request that the federal safety agency investigate whether a mandatory recall and replacement of these defective components is necessary as the consequences of immediate complete unexpected loss of propulsion. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C.

Filed Oct 10, 2026 · Fuel system · TN

The component that failed was the fuel pump control module, which the dealership currently has in its possession. While driving on the interstate at 70 mph with my family of five—including three young children—the vehicle suddenly lost all motor power. This left us stranded on the shoulder for three hours waiting for a tow truck, completely without heat or AC. Once the vehicle was towed to the dealership, they confirmed the fuel pump module failure. There were no warning lamps, error messages, or prior symptoms; the engine simply stopped running. Fortunately, there were no injuries or crashes, but that was solely because I was lucky enough to safely maneuver across four lanes to the shoulder just before an exit. It was an incredibly dangerous situation that could have been much worse. I contacted GM Customer Service, but they stated they could not and would not do anything to assist with the situation. I have retained both the official dealership repair invoice confirming the failure and the tow bill from the incident.

Filed Sep 22, 2026 · Fuel system · NJ

part number 13554821 fuel pump control module has failed 2 times. April 2023 on Interstate 95 near Savannah GA in very busy traffic. Vehicle buckled and seized, just barely made it to the shoulder of the road. Same part failed again 9/18/26 while turning onto Sunrise Hwy in NY another very dangerous situation as we were stranded in the middle of a very busy intersection

Filed Sep 21, 2026 · Fuel system · 59,800 miles · IN

The contact owns a 2022 GMC Yukon XL. The contact stated while driving 70 MPH, the accelerator pedal was depressed, and the vehicle lost motive power. The contact's [XXX] was inside the vehicle during the failure. The dealer was contacted by phone. The contact was informed that the failure was not associated with any recall. The vehicle was towed to an independent mechanic where it was diagnosed with fuel pump power control module failure. The contact was informed that the fuel pump power control module needed to be replaced. The vehicle was repaired. The contact referenced the federal safety agency Campaign Number: 21V739000 (Fuel System, Gasoline); however, the VIN was not associated with the recall. The manufacturer was contacted, and a case was filed. The contact was advised to contact the federal safety agency Hotline to report the failure. The failure mileage was approximately 59,800. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Jul 2, 2026 · Fuel system · MI

My 2021 GMC Yukon XL recently suffered a failure of its fuel pump control module. This occurred at just 44,000 miles, mere weeks after my manufacturer warranty expired in June of 2026. This issue goes far beyond a financial inconvenience or a matter of consumer reimbursement; it is a severe, life-threatening safety hazard that GM has failed to permanently resolve. My Experience: Sudden Power Loss While Towing The gravity of this part failure became clear during a recent drive. I configuration-matched this vehicle—a heavy-duty Yukon XL with a 6.2L engine and a 4x4 towing package—specifically for its capacity to safely haul heavy loads. While traveling with a trailer attached, the vehicle experienced a sudden, catastrophic loss of engine power. Without warning, the engine sputtered and died. Had this occurred on a steep incline, a blind curve, or in heavy highway traffic, a catastrophic multi-vehicle collision would have been entirely unavoidable. Critical Safety Hazards and Concerns •Inability to Maintain Speed, Loss of Vital Assist Systems, & Compounded Towing Risks Systemic Failure and Inadequate Remediation What makes this situation entirely unacceptable is that this specific vehicle was already subject to previous GM safety campaigns regarding this exact component (including Safety Recall #N212332040 and subsequent Emission Recall #N252516900). GM is fully aware that their supplier produced defective modules that are prone to premature internal short-circuits. Yet, their remediation strategy has been entirely inadequate. By managing this through piecemeal, phased rollouts and limited VIN inclusion lists, they are leaving dangerous vehicles on the road until the point of failure. Drivers are effectively acting as crash test dummies, waiting for their engines to die in dangerous environments before GM acknowledges that their specific VIN was fitted with the defective supplier part.

Filed Jun 16, 2026 · Fuel system · 59,000 miles · MA

The contact owns a 2021 GMC Yukon XL. The contact stated that while starting the vehicle, the engine stalled and the vehicle failed to start. The check engine warning light was illuminated. The vehicle was towed to an independent mechanic, who determined that the fuel pump power control module needed to be replaced. The vehicle was not repaired. The contact related the failure to the federal safety agency Campaign Number: 21V739000 (Fuel System, Gasoline); however, the VIN was not included in the recall. The manufacturer was made aware of the failure and advised the contact to file a complaint with the federal safety agency Hotline. The failure mileage was approximately 59,000.

Filed Apr 14, 2026 · Electrical, Engine · MI

March 29th 2026 my 2021 Yukon XL engine stalled while driving at 45mph (No prior warning lamps or messages, restart engine came on dash) causing me to immediately pull over and come to a stop still in traffic, it shifted my vehicle into park, I was in an in an un-safe spot and was stuck in park (conditions not correct for shift on dash) because my vehicle would not allow me to shift to neutral and push it to the side of the road, (could not jump start) Had towed to dealership and mentioned Engine Failure and Fuel pump control module Recalls but according to them it was a starter issue, I asked them to still check the fuel pump control module regardless. Picked up vehicle and a week later April 14th the exact same thing happened vehicle stalled while driving dash said Restart Engine while coasting (No prior warning lamps or messages) forcing me to pull over where it rolled to a stop and locked itself into park leaving me in unsafe conditions again. Had towed back to the same dealership and waiting to hear back from them.

Filed Mar 19, 2026 · Fuel system, Transmission · TX

High pressure fuel pump housing failed and filled the cabin with fumes. Rendered the the Yukon unsafe to drive with fuel flooding the engine compartment. Took the dealer 57 days to repair the car. No warning lights, only indication was the fumes in the cabin.