Serious defect in the aluminum wheels on a roadtrek motorhome. *mr the original equipment aluminum wheels, but the sales dealer told the consumer that the vehicle had come equipped with steel wheels. The central hole of the axle in the aluminum wheel was 1.5 mm larger than the similar hole in the new steel wheels. The new steel wheels fit tightly on the axle. They concluded that the weight was entirely on the studs and consequently the studs would be pressured to bend back and forth with every wheel revolution. The right rear hub had all eight studs sheared off or pulled out. The left wheel had one broken stud with the remainder of the stud and missing nut. The mechanics checked the torque on the seven remaining nuts. Six torque to at or near 140 pounds. The seventh lug nut had taken ten or twenty pounds of torque and then the stud sheared off. A sixth stud sheared off later at the repair shop when the mechanic tried to loosen the lug nut. The front wheels showed studs that were noticeably bending away from their correct position so the mechanics thought that it would be best not to torque them at the site. A week later after the most recent service, the consumer braked moderately down a steep grade, when without any previous vibration or noise, the right rear wheel fell off. The consumer found four sheared off studs, with nuts on, in the grass and roadside ditch. The consumer demanded compensation for the damage that resulted from the negligence on the part of the home/park motorhomes and the sales dealer. (roadtrek 200) *scc
The worst 2000 Home And Park Roadtrek 200 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Wheels1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Wheels1
Recalls 2
Fuel system, gasoline: delivery: hoses, lines/piping, and fittings
- What is wrong
- Vehicle description: class b motor homes built on chevrolet g-cut away van chassis equipped with an after-market gasoline tank manufactured by transfer flow inc. Of california. The tank incorporates a rollover valve and a 5/8" rubber vent hose extending from the top of the tank. It is possible, with the mounting of the fiberglass body, the vent hose can be chaffed from the fiberglass body underside.
- Risk
- This could cause a fuel vapor leak which could lead to a fire or explosion.
- Remedy
- Dealers will lower the gasoline tank to install a spacer shim. This spacer provides the necessary clearance for the vent hose from the vehicle underside.
Recall number 00V333000 · Recall details
Visibility: windshield
- What is wrong
- Vehicle description: motor homes built on dodge 2500/3500 van chassis and on chevrolet g-cut away van chassis. These motor homes were built using frameless windows. Some of these windows may have not bonded correctly.
- Risk
- When the windows are opened/closed, or when little pressure is applied to the vent glass, the bonding can give up producing a delamination between vent glass and aluminum.
- Remedy
- Dealers will replace the affected windows with new ones.
Recall number 00V234000 · Recall details
What 2000 Home And Park Roadtrek 200 owners say
Most recent owner complaints, unedited.
Compare the 2000 Home And Park Roadtrek 200
Other model years
19992000
Questions about the 2000 Home And Park Roadtrek 200
Is the 2000 Home And Park Roadtrek 200 reliable?
Owners have filed 1 complaint about the 2000 Home And Park Roadtrek 200, close to a typical Roadtrek 200 model year.
What is the most common problem with the 2000 Home And Park Roadtrek 200?
Wheels, with 1 complaint.
How many recalls does the 2000 Home And Park Roadtrek 200 have?
2 recalls, covering fuel system, gasoline and visibility.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2000 Home And Park Roadtrek 200?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history