Check a VIN

2009 Honda Element problems

The most common problem on the 2009 Honda Element is brakes, typically around 22,000 miles. It has fewer complaints than a typical Element model year.

Fewer complaintsAmong the best years of this model
Year score
84/100
Owner complaints
31
Recalls
8
Service bulletins
49
Worst area
Brakes
Fuel economy
20-22mpg

The worst 2009 Honda Element problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

  • Brakes
    8
  • Suspension
    8
  • Airbags
    5
  • Body
    5
  • Acceleration
    3

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

  • Brakes
    8
  • Suspension
    8
  • Airbags
    5
  • Body
    5
  • Acceleration
    3
  • Steering
    3
  • Driver assistance
    1
  • Electrical
    1
  • Engine
    1
  • Fuel system
    1
  • Tires
    1
  • Transmission
    1
  • Visibility
    1
  • Wheels
    1

Recalls 8

Air bags: frontal: driver side: inflator moduleReported June 27, 2019 · 3,947 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1‑888‑234‑2138. Honda's numbers for this recall are Q5A and Y58.

Recall number 19V499000 · Recall details

Air bags: frontal: passenger side: inflator moduleReported June 27, 2019 · 1,657,752 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1‑888‑234‑2138. Honda's numbers for this recall are E5D and X5C.

Recall number 19V501000 · Recall details

Air bags: frontal: driver side: inflator moduleReported March 6, 2019 · 1,101,534 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous Takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1‑888‑234‑2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1‑888‑234‑2138. Acura's number for this recall is U40.

Recall number 19V182000 · Recall details

Air bags: frontal: passenger side: inflator moduleReported January 9, 2018 · 24,945 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain 2010-2012 Acura RL, 2010 Honda Element, and 2010-2013 Honda Ridgeline vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Honda is recalling certain 2010 Acura RL, 2010-2011 Honda Element and Honda Ridgeline vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." If not included in zones A or B above, Honda is recalling certain 2009 Acura RL, Honda Element, and Honda Ridgeline vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain inflators assembled as part of the frontal air bag modules, and used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), may explode due to propellant degradation occurring after long-term exposure to higher absolute humidity, temperature and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 16, 2018. Owners may contact Honda customer service at 1‑888‑234‑2138. Honda's numbers for this recall are U0H, and G0I.

Recall number 18V041000 · Recall details

Air bags: frontal: passenger side: inflator moduleReported January 10, 2017 · 308,884 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, if not included in "Zone A" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2009 Acura RL and Honda Element vehicles, 2007-2008 Honda Fit vehicles, 2005-2008 Honda Pilot vehicles and 2006-2009 Honda Ridgeline vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, if not included in "Zone A" or "Zone B" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2008 Acura RL, Honda Element and Honda Pilot vehicles, 2007-2008 Honda Fit vehicles and 2006-2008 Honda Ridgeline vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1‑888‑234‑2138. Honda's numbers for this recall are KD9 and KE0.

Recall number 17V029000 · Recall details

Air bags: frontal: passenger side: inflator moduleReported May 23, 2016 · 1,790,894 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Honda is recalling certain model year 2003-2006 Acura MDX, 2005-2008 Acura RL, 2005-2006 Honda CR-V, 2003-2008 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2008 Ridgeline vehicles originally sold, or that have ever been registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Honda is recalling model year 2002-2004 Odyssey and model year 2003-2004 Acura MDX, Honda Element, and Honda Pilot vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1‑888‑234‑2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.

Recall number 16V344000 · Recall details

Air bags: frontal: driver side: inflator moduleReported May 28, 2015 · 6,281,043 vehicles affected
What is wrong
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1‑888‑234‑2138. Owners may contact Acura customer service at 1‑800‑382‑2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V‑593, 09V‑259, 10V‑041, 11V‑260, 14V‑351 and 15V‑153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.

Recall number 15V320000 · Recall details

Trailer hitchesReported September 5, 2012 · 5,216 vehicles affected
What is wrong
Honda is recalling certain model year 2007 through 2011 Element passenger vehicles equipped with an accessory trailer hitch wiring harness. The wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. As a result the turn signals only illuminate when the brake lamps are illuminated. This does not comply with the requirements of Federal Motor Vehicle Safety Standard No. 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk
Without trailer turn signal illumination, the driver's intent is not communicated, potentially increasing the risk of a crash.
Remedy
Honda will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on September 20, 2012. Owners may contact Honda at 1‑800‑999‑1009.

Recall number 12V436000 · Recall details

See all 8 recalls for the 2009 Honda Element

Defect investigations

Desiccated Air Bag Inflator RuptureOpened September 17, 2021, still open

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA21002

Air Bag Inflator RuptureOpened February 24, 2015, still open

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.the federal safety agency.dot.gov/owners/Searchreference under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492

EA15001

Air Bag Inflator RuptureOpened June 11, 2014, closed March 2, 2015

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.the federal safety agency.dot.gov/owners/Searchreference under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492

PE14016

Technical service bulletins for the 2009 Honda Element 49

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

See all 49 bulletins for the 2009 Honda Element

2009 Honda Element fuel economy

Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.

EngineDriveCityHighwayCombined
2.4L 4‑cylFWD18-2023-2520-22
2.4L 4‑cyl4WD18-1923-2420-21

What 2009 Honda Element owners say

Most recent owner complaints, unedited.

Filed Oct 8, 2026 · Suspension · MI

The frame rusted and separated where the rear trail arm connects to the vehicle, so it cannot move.

Filed Aug 10, 2026 · Body, Suspension · IN

The car is extremely rusty, so much so that the driver side trailing arm detached from the rest of the frame. The driver side rear suspension components are detached from the car. The car has been garage-kept since new, yet is extremely rusty. This is just like what the Canadian Honda Element recall was all about. The local dealership refused to do anything and said the car was out of warranty.

Filed Jun 18, 2025 · NC

There is corrosion on the rear trailing arm and surrounding area. Also rust is forming on rear subframe / crossmembers and the front subframe. Over time, this can result in premature structural failure and catastrophic accident. It poses a serious safety risk. It affects the structural integrity of the suspension system. There’s no recall even though multiple complaints exist for similar make/model.

Filed Jun 13, 2025 · Acceleration, Steering · IL

Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's the federal safety agency Recall (23V‑228). Sections of my car’s rear frame are rusty. Just like with the CR-V, a recall for the rear frame corrosion first occurred in Canada and then in the US: see the federal safety agency Recall 23V‑228’s chronology. The Honda Element's Canadian recall is as follows: "Transport Canada Recall - 2021024 – HONDA". As of today, there is no the federal safety agency recall for rear frame corrosion for Honda Elements. I am submitting this complaint for this car now, and also contemporaneously am submitting other complaints under different VINs for my other Elements with rust problems: every Honda Element that I have ever owned, even this Element for this complaint that I am submitting right now, that had spent its entire 14 year life as a New Mexico, Arizona, and Texas car has had rust problems. In other words, no matter what environment these Elements (which were made for the model years 2003-2011) are in, they corrode right away (within any factory warranties), and eventually become dangerous.

Filed Jun 13, 2025 · Acceleration, Steering · IL

Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's the federal safety agency Recall (23V‑228). Large sections of my car’s rear frame are completely missing, as shown in the photographs. My car is now undriveable. I had it towed to two Honda dealerships at my expense and both refused to even look at the car's rust, when I explicitly asked them to determine if the car was safe to drive. Niether dealership would confirm. Honda corporate cited that they were unable to assess the photographs that I sent to it because it does not physically inspect the cars. Honda corporate also insisted that it could not do anything about any dealership’s behavior as they are allegedly completely independent from Honda of North America. Honda corporate also looked up the history of my Hondas that I have owned and Elements that I still own and actually asked me, if I purchased them just to try to have Honda fix them for free. Just like with the CR-V, a recall for the rear frame corrosion first occurred in Canada and then in the US: see the federal safety agency Recall 23V‑228’s chronology. The Honda Element's Canadian recall is as follows: "Transport Canada Recall - 2021024 – HONDA". As of today, there is no the federal safety agency recall for rear frame corrosion for Honda Elements. I am submitting this complaint for this car now, and also contemporaneous will submit less detailed complaints under different VINs for my other Elements with rust problems: every Honda Element that I have ever owned, even one that had spent its entire 14 year life as a New Mexico, Arizona, and Texas car has had rust problems. In other words, no matter what environment these Elements (which were made for the model years 2003-2011) are in, they corrode right away (within any factory warranties), and eventually become dangerous.

Filed Sep 4, 2024 · Body · 152,403 miles · NY

The contact owns a 2009 Honda Element. The contact stated while driving approximately 20 MPH and approaching a stop sign, the contact observed a noise coming from the rear driver's side of the vehicle. The contact stated that when the vehicle came to a stop, he opened the driver's door and observed the rear passenger’s side tire was sideways. The vehicle was towed to a body shop where the contact was informed that the frame of the vehicle near the trailing arm was rusted through and needed to be replaced. The manufacturer was not notified of the failure. The failure mileage was 152,403.

Filed Jul 16, 2024 · Body, Suspension · 274,000 miles · IL

The contact owns a 2009 Honda Element. The contact stated there was an extreme amount of rust on the vehicle. The contact stated that the trailing arm was corroded and had several holes. The TPMS warning light was illuminated. The vehicle was taken to the local dealer, who was unable to assist with the repairs. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 274,000.

Filed May 24, 2024 · Body · VT

While driving the left rear wheel went sideway... looking underneath the Unibody had corroded to the point the left control arm separated from the car making it undrivable.... was told to not drive the car as it is not safe...

Filed Sep 25, 2023 · Suspension · WI

The driver side rear trail arm broke free from under the vehicle. Vehicle loses control much like having flat tires but more violent fish tailing. Vehicle is hard to control to pull over to shoulder. Photos were shown to local Honda dealer representative, Scott Guyette. (Gustman Honda in Appleton Wi). Scott Guyette at the dealership stated that he has seen this numerous times on the Honda Element and they are currently fixing Honda CRVs with the same issue. Email: ([email protected]) He stated, don't tow it in, just send photos, which I did.

Filed Jun 23, 2021 · Suspension · 125,000 miles · PA

The contact owns a 2009 Honda Element. The contact stated the driver's side rear trailing arm detached from the vehicle while he was reversing at an undisclosed speed, and the vehicle stopped. There were no warning lights illuminated. The contact stated the failure occurred due to rust and corrosion. The vehicle was towed to the dealer, who informed them they could not provide assistance, and then the vehicle was towed to the contact's residence. The vehicle was not diagnosed nor repaired. The manufacturer was made aware of the failure but did not provide any assistance. The approximate failure mileage was 125,000.

Used buying checklistWhat to check on a 2009 Honda Element before you buy

Compare the 2009 Honda Element

Other model years

200320042005200620072008200920102011

Questions about the 2009 Honda Element

Is the 2009 Honda Element reliable?

Owners have filed 31 complaints about the 2009 Honda Element, fewer than a typical Element model year.

What is the 2009 Honda Element year score?

The 2009 Honda Element scores 84 out of 100 (good). The score compares it with the other model years of the Honda Element: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.

What is the most common problem with the 2009 Honda Element?

Brakes, with 8 complaints, typically around 22,000 miles. Next is suspension (8).

How many recalls does the 2009 Honda Element have?

8 recalls, covering air bags and trailer hitches.

What gas mileage does the 2009 Honda Element get?

Official estimates for the 2009 Honda Element range from 20 to 22 mpg combined. The most efficient version (2.4L 4-cyl, FWD) gets 18-20 city and 23-25 highway.

Share your experience with the 2009 Honda Element

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2009 Honda Element?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN