2013 Hyundai Sonata airbags problems

What is wrong

Hyundai Motor America (Hyundai) is recalling certain 2011-2013 Sonata and 2011-2012 Sonata Hybrid vehicles. On February 27, 2018, Hyundai Motor Company (Hyundai) notified the federal safety agency that they were recalling 154,753 model year 2011 Sonata vehicles. On April 18, 2018, Hyundai expanded the recall to include an additional 425,305 model year 2012-2013 Sonata and 2011-2012 Sonata Hybrid vehicles. In the event of a crash, the air bag control unit (ACU) may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying.

Risk

If the frontal air bags, seat belt pretensioners, and side air bags are disabled, there is an increased risk of injury to the vehicle occupants in the event of a vehicle crash that necessitates deployment of these safety systems.

Remedy

Hyundai will notify owners, and dealers will install an external wire filter kit, free of charge. The recall began October 15, 2018. Owners may contact Hyundai customer service at 1‑855‑371‑9460. Hyundai's number for this recall is 174.

Recall number 18V137000 · Recall details

What is wrong

Hyundai is recalling certain model year 2012-2013 Hyundai Sonata passenger cars, manufactured from January 24, 2012, through June 21, 2012. The curtain side airbags on these vehicles may inflate without deployment command due to an error during manufacturing.

Risk

The curtain airbag may inflate without deployment command and increase the risk of injury to occupants of the vehicle. Additionally, an unexpected deployment would be a significant driver distraction and would limit the driver's visibility, increasing the risk of a crash.

Remedy

Hyundai dealers will notify owners, and dealers will replace the curtain side airbags free of charge. This recall began on August 31, 2012. Owners may contact Hyundai at 1‑800‑633‑5151.

Recall number 12V352000 · Recall details

The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW.  The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications.  The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V‑668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU.  In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.  Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time.  In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners.  Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V‑668, 18E-043, 18V‑137, 18V‑363, and 20V‑024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by the federal safety agency that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.

EA19001

The Office of Defects Investigation (ODI) opened PE18-003 on 3/16/18 to investigate incidents involving crashes, resulting in significant collision related damage, where the frontal airbags failed to deploy. ODI reviewed complaint data, available design, test, and field data on the model year (MY) 2011 Hyundai Sonata, MY 2012-2013 Kia Forte and Forte Koup vehicles. ODI also evaluated data from the automotive air bag system supplier, ZF-TRW (ZF), to review vehicles that may contain the same air bag control unit (ACU) used in the subject vehicles. Hyundai Motor America (HMA) issued recall No. 18V‑137 for MY 2011-2013 Sonata and MY 2012 Sonata Hybrid vehicles. Kia Motors America (KMA) issued recall No. 18V‑363 for MY 2010-2013 Kia Forte and Forte Koup, MY 2011-2013 Optima, MY 2011-2012 Optima Hybrid, and MY2011-2012 Sedona vehicles. The two recalls address vehicles containing ACUs manufactured without adequate circuit protection by installing a wire harness filter kit to prevent internal damage to the ACU. In the event of a crash, ACU damage may result in the disablement of the vehicle's airbags. Each respective manufacturer has mailed letters to affected vehicle owners informing them of the remedy and its availability. ODI plans to evaluate the susceptibility of the subject ACU to electrical signals, as well as other vehicle factors that can either lead to, or reduce the likelihood of, an electrical overstress event in other vehicles manufactured with the subject ZF ACU.Accordingly, this Preliminary Evaluation has been upgraded to an Engineering Analysis (EA19-001), to expand the scope of the investigation to include the Tier-one supplier and any manufacturers who installed the subject ACU in production vehicles. Additional information is available with the closing resume available at (see Associated Documents).The ODI complaints cited above can be viewed at under the following ODI identification numbers: 10781050, 10849839, 11099038, 11080341.

PE18003