Check a VIN

1996 International Harvester 2574 problems

Typical yearClose to a typical year
Owner complaints
0
Recalls
2

The worst 1996 International Harvester 2574 problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

Recalls 2

Suspension: rearReported November 22, 1996 · 1,133 vehicles affected
What is wrong
The drive axle housings consist of a plate steel center section and two forged spindles, one of which is welded to each end of the center section. Each spindle contains a keyway slot in which the locking tab for the wheel bearing nut locking mechanism is inserted. The length of the keyway slot may not be long enough to accommodate the tab causing the tab to be deformed or damaged during installation.
Risk
This locking tab prevents the wheel bearing nut from loosening during vehicle operation. If this tab is deformed, the nut can loosen allowing the wheel to separate from the axle increasing the risk of a vehicle accident.
Remedy
Dealers will replace the drive axle housing nuts with a conventional wheel nut hardware system.

Recall number 96V233002 · Recall details

SuspensionReported August 1, 1996 · 21 vehicles affected
What is wrong
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. These shafts can fracture inside the beam at the toe of the weld.
Risk
Vehicles are subject to vehicle tilt and possible rollover in the event that both equalizing beams, on the same side of the vehicle, experience a simultaneous shaft failure. Affected suspensions can also drop and contact the road surface generating sparks which could ignite flammable material.
Remedy
Owner notification is being conducted by neway anchorlok. Dealers will inspect and replace all suspension suspension beams with suspension beams containing appropriate shafts.

Recall number 96V124004 · Recall details

See all 2 recalls for the 1996 International Harvester 2574

Compare the 1996 International Harvester 2574

Other model years

2000

Questions about the 1996 International Harvester 2574

Is the 1996 International Harvester 2574 reliable?

Owners have filed 0 complaints about the 1996 International Harvester 2574.

What is the most common problem with the 1996 International Harvester 2574?

There are not enough complaints to tell.

How many recalls does the 1996 International Harvester 2574 have?

2 recalls, covering suspension.

Share your experience with the 1996 International Harvester 2574

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1996 International Harvester 2574?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN