I received a recall notice re: passenger airbag inflator housing. The recall # is r49/the federal safety agency 15v‑354. Every dealer I have contacted states that it will be at least march before they start receviing replacement parts for this recall. If it's so important to be replaced, how come I'm being told it will be at least 6 months??? What is being doen about it in the mean time?
The worst 2008 Itasca Navion problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Airbags1
- Engine1
- Lights1
- Transmission1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Airbags1
- Engine1
- Lights1
- Transmission1
Recalls 3
Seat belts
- What is wrong
- Winnebago is recalling certain model year 2006 through 2011 winnebago view and itasca navion motor homes because the dinette area seat belt restraints on those vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages." in a collision, the generated crash forces can cause the restraint's attachment to tear and allow the anchor to separate from the body of the vehicle.
- Risk
- If the restraint separates from the vehicle during a crash, the belt will not properly restrain the seat occupant, increasing the risk of injury or death to the occupant.
- Remedy
- Winnebago will add additional seat belt anchorages free of charge. The safety recall began on november 12, 2010. Owners may contact winnebago at 1‑800‑537‑1885.
Recall number 10V470000 · Recall details
Engine and engine cooling: engine: diesel
- What is wrong
- Winnebago is recalling 114 my 2008 view, my 2009 era, and my 2008 itasca navion class c motor homes built on sprinter chassis and equipped with 3.0l diesel engines. The crankshaft sensor in certain diesel engines could fail due to separation of bond wires from the lead frame in the sensor.
- Risk
- This results in an interruption in the electrical connection in the chip housing of the sensor. When this happens, affected vehicles may lose power. This could result in the vehicle becoming immediately inoperable increasing the risk of a crash.
- Remedy
- Sprinter is handling the remedy for this campaign (please see 07v594). Dealers will replace the crankshaft sensor free of charge. Owners may contact sprinter at 1‑800‑992‑1997 or winnebago at 1‑641‑585‑3535.
Recall number 08V216000 · Recall details
Equipment: recreational vehicle/trailer
- What is wrong
- On certain motor homes equipped with with a 3.2 qd cummins onan generator, the generator's internal controller may fail; however, the electrical circuits would remain energized. Included in these circuits is the electronic preheated element which aids cold starts at ambient temperatures below 0 degrees celsius. In normal operation, this circuit is energized no longer than 120 seconds at 30 celsius. If the circuit remains energized beyond the designed period, the preheated element can over heat.
- Risk
- If the element over heats, a fire in the air intake system could occur.
- Remedy
- Winnebago is working with cummins to replace the generators free of charge (please see 07e076). Owners may contact cummins at 812‑377‑3713 or winnebago at 641‑585‑3535.
Recall number 07V445000 · Recall details
What 2008 Itasca Navion owners say
Most recent owner complaints, unedited.
2008 itasca navion motorhome produced by winnebago. Propane tank is totally disintegrating. Metal is flaking off in very large chunks. Location of motorhome is vermont, in the lake champlain area. Lake champlain is not a salt water lake. Winnebago is telling us we are in a caustic area. Even if we were, it would take many years for the propane tank to progress to the stage it is currently at. Have never vacationed or stayed for an extended time near the ocean. Cannot find anyone to inspect the tank. Pictures can be sent by email if necessary.
2008 itasca motor home has transmission problems. *nj the consumer stated on 3 occasions, the transmission has shifted in a manner that it temporarily locked up the driveline accompanied by a loud noise. The engine also exceeded 3000 RPM's before shifting into high gear. At around 1500 RPM, the transmission would sometimes grab then release and grab again upon acceleration. The transmission was worse when it was warm. From idle, the engine was sometimes very slow to respond.
Tl*the contact owns a 2008 itasca navion. The contact stated that the headlights and tail lights remain illuminated, making it difficult for the driver's behind him to see his brake lights during the day. The dealer stated that they will not change the vehicle's design. The current mileage was 2,000 and the failure mileage was unknown. Updated 08/31/07
Compare the 2008 Itasca Navion
Other model years
Questions about the 2008 Itasca Navion
Is the 2008 Itasca Navion reliable?
Owners have filed 4 complaints about the 2008 Itasca Navion, 2.0 times a typical Navion model year.
What is the most common problem with the 2008 Itasca Navion?
Airbags, with 1 complaint. Next is engine (1).
How many recalls does the 2008 Itasca Navion have?
3 recalls, covering seat belts, engine and engine cooling and equipment.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2008 Itasca Navion?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history