The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was not made aware of the issue. The contact stated while the vehicle was started and parked, stationary, or being driven, the vehicle was losing traction control. The check engine, the traction control, and the ABS warning lights were illuminated. The vehicle was driven to an independent mechanic to be diagnosed. The independent mechanic diagnosed the vehicle with battery failure. The two batteries were replaced; however, the failure persisted. The ABS feature was disabled; however, the warning light was intermittently illuminated. The failure mileage was approximately 84,000. VIN tool confirms parts not available.
2019 Jeep Grand Cherokee brakes complaints
Page 4 of 5: complaints 71 to 100 of 117, newest first, as owners wrote them.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while attempting to accelerate from a stop, the vehicle jolted before shifting gear and accelerating. The contact stated that the gear shifter failed to release immediately to the intended gear while in park(P). The contact stated that several attempts were needed to release the gear shifter out of park(P). The contact stated that after shifting out of park(P) into reverse(R), the message to shift out of park was displayed. The brake warning light was illuminated. The dealer was contacted. The manufacturer was not made aware of the issue. The failure mileage was 53,000. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that the electronic stability warning light was illuminated. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact called an independent mechanic and scheduled an appointment. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The approximate failure mileage was 36,800. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while driving 65 MPH on the highway, the vehicle started to feel heavy. The contact stated that several unknown warning lights illuminated. The vehicle was driven to an independent mechanic to be diagnosed. The independent mechanic diagnosed the vehicle with ABS communication error, power train detecting a faulty signal from the master pressure, brake pressure center stored in the module, wheel speed sensor error power train ABS module fault. The vehicle was not repaired. The electronic stability control was deactivated, Auto START/STOP was deactivated, and the check engine warning lights alternated every other day. The manufacturer was made aware of the failure. The failure mileage was approximately 79,881. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated while the vehicle was parked, the vehicle stalled. The check engine warning light was illuminated and the "Service Electronic Stability Control" and "Auto-Park Disabled" messages were displayed on the instrument panel. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The vehicle was taken to an independent mechanic where it was diagnosed that an unknown sensor needed to be replaced. The dealer informed the contact that replacing the sensor might not solve the issue and that the parts that the dealer needed to repair the vehicle were unavailable. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 39,000. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Numbers: 22V426000 (SERVICE BRAKES, HYDRAULIC) and 24V838000 (SERVICE BRAKES, HYDRAULIC); however, the parts to do the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The contact stated while driving downhill at approximately 20 MPH, the steering wheel seized. The contact was unable to turn the steering wheel to the left or the right. The vehicle later returned to normal functionality. There was no warning light illuminated. The vehicle was taken to an independent mechanic to be diagnosed; however, no cause for the failure was provided. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 70,000. Parts distribution disconnect on the federal safety agency Campaign Number: 22V426000 (SERVICE BRAKES, HYDRAULIC). VIN tool confirms parts not available for the federal safety agency Campaign Number: (SERVICE BRAKES, HYDRAULIC).
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the check engine and stabilitrak warning lights were illuminated. The vehicle was taken to the dealer who confirmed the warning lights being illuminated, and related the failure to the recall; however, the part was still not available. The manufacturer was made aware of the issue. The failure mileage was 65,000. VIN tool confirms parts not available.
On December 31, 2024 we had a 2019 Jeep Grand Cherokee Laredo cause a crash due to malfunctioning parts. The ABS brakes failed and locked up. The steering wheel also locked up, causing the vehicle to crash hard into a guard rail. This resulted in the vehicle being totaled, property damage, and a ER visit. While braking on a mountainous road, the brakes and wheel locked up and the vehicle could not be controlled. The police report states this is what happened. We had the vehicle into the dealership multiple times within a year stating that the brakes weren't working properly. They kept telling us that they couldn't find any issues; however, they kept trying to replace different parts to both the front and rear brakes. The vehicle was inspected by the police, insurance adjuster, and a collision body shop. The vehicle was totaled and not 1 single air bag deployed during the collision either. This incident was confirmed by the 3 parties I listed. A family members life was put at risk and looking at the damage, it appeared that it started to roll but ended coming back down instead. When I contacted Mopar about this incident, I was informed of the recall. They also said that there was a fix for the recall. However, there is no fix as to date. We are short a vehicle, which was paid off, an increase in auto insurance, and had a Lifetime Max Care Warranty through Mopar. None of this was in our control. The insurance company has taken the vehicle into their possession. There was no warning signs, it just happened suddenly.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that while driving at an undisclosed speed on ice, the rear wheel spun. The contact stated that it was very difficult to maintain the stability of the vehicle. In addition, the parking assist feature and the brake light remained illuminated after the brake pedal was released. The vehicle was taken to an independent mechanic where it was diagnosed with ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired; however, the independent mechanic cleared the codes. The codes reoccurred. The dealer was made aware of the failure. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was 62,715. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of the federal safety agency Campaign Number: 24V838000 (Service Brakes, Hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
My truck slips out of gear because brake lights stay illuminated stays on can shift from any get without applying the brake pedal
Brakes lights remain on when vehicle is in Park and in Drive without brake pedal activation. ABS is also engaged in Park and presents with hard pedal and no travel. I brought the vehicle to an authorized Jeep dealer in September 2014. Note- Recall Z48 software update was performed April 2023. Service notes state replaced ABS module, no change. Internal pressure sensor reporting 117PSI with no brake pedal input. Replaced HCU module. I paid $1529 for this repair. FCA refused to reimburse me on the original Z48 recall and now refuses reimbursement for the 94B/the federal safety agency 24V‑838 recall.
Vehcile affected: 2019 Jeep Grand Cherokee - Overland _ 2 wheel drive Vehicle Mfr Date - October 2018 The vehicle was in Park and engine was off. I got in the driver seat, mashed the brake, pressed the starter button, the starter responded so I immediately took my hand off the button. Even without my hand on the button the starter button would not disengage… it just repeatedly kept spinning and spinning and spinning. Kind of like it was hung or something. I had even tried pressing the start button again to make it stop but that didn’t work… (The button went in and came back out with no problem so the button itself was not stuck) The starter just wouldn’t disengage. I couldn’t figure out what to do. It did this for at least 30 to 45 seconds…. Like, My husband had time to get out of the backseat and WALK all the way around the front car to the driver’s door. Right before he got there I tapped the brake pedal with my foot and it FINALLY disengaged and stopped trying to start the engine. This problem Scared the beejeebies out of me!!! The engine never started up when the starter wouldn’t disengage. I had plenty of gas too - Just under a full tank of gas. Nothing coded. No problem indicator lights came on. Husband said it acted like either the bendix was stuck OR motor was spin over but would not successively crank up … it just kept spinning on its own I was not pressing the starter button anymore. This is the hardest thing to describe! All I know is… that was NOT normal!
The exact same issue described in the federal safety agency 23E-019 happened to this vehicle, but Chrysler is saying this vehicle doesn't qualify for the recall even though the same issue described in the recall notice occurred to this vehicle and since this is a 2019 Jeep Grand Cherokee, it does fit the timeframe this recall occurred 2011-2022 (WK) Jeep Grand Cherokee.
I received a letter in the mail that my Jeep had a recall for some type of sensor that affects the brakes and brake lights. I’ve read that a malfunction in this sensor can cause my brake to not work and can cause me to crash into someone or something. The fact that this issue hasn’t been resolved yet is beyond me. This recall came out in 2022. It had been 2 years. What’s going happen when a mother is driving her family around in her Jeep that also has this recall on it, she switched the brake on but it doesn’t brake and she and her family crash into someone. Life’s are at risk here. I am planning to start a family within the next year and I will be getting rid of this car because I will not trust my family in it.
Today after I parked my 2019 jeep grand Cherokee and locked it I noticed my brake lights stayed illuminated. I got back in my car and confirmed that I was in park and my parking brake was on and my brake pedal did not feel stuck down in any way. I also tried turning my headlamps from auto to off. That didn’t resolve my brake light issue. I restarted it and put it in gear and drove a little and my fiancé confirmed from outside the car that even when in drive and moving without my foot on brake my brake lights stayed on. I got out and locked it again and then tried my remote start which did not function. I then decided to try drive around a little more and see if it would reset itself. Nothing changed with driving. Then after driving around I tried turning off my park sense button and the brake light went off and back to normal. Once i was parked again I retried the remote start and it worked. When I looked up this issue it sounded like symptoms of recall z48 which was repaired June 29, 2022 by my dealer. Tomorrow I will see if it happens again and if it will start and shift without brake pedal pressed as that is also related to recall z48. Could the repair for recall z48 have failed or was not done properly by my dealer? Just for reference my jeep only has 11,000 miles on it.
The contact owned a 2019 Jeep Grand Cherokee. The contact received the federal safety agency Campaign Number: 22V426000 (Service Brakes, Hydraulic). The contact stated while driving at an undisclosed speed, the vehicle directly in front stalled inadvertently causing the contact to abruptly depress the brake pedal. The contact stated while depressing the brake pedal, it failed to function causing the contact to crash with the vehicle in front. The vehicle was occupied by the contact and her son. The air bags deployed causing injury to both arms, right shoulder, and legs to the contact as well as causing her son emotional PTSD. The contact received medical attention via an Emergency Room. The contact stated the front driver-side door as well as the steering wheel were punctured. No injuries were reported for the other driver however their rear driver-side bumper was dented. A Police report was filed. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 36,000.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that while pulling into a parking space and pressing the brake pedal the braking system malfunctioned causing and the vehicle accelerated forward and crashed into two parked vehicles. No injuries were reported. A police report was taken at the scene and the vehicle was towed to the home. The vehicle was later towed to the local dealer was unable to diagnosed a failure had occurred. Later, while the daughter was driving at highway speeds the failure reoccurred and the vehicle would not accelerate and the braking system malfunctioned. The vehicle was steered to the side of the road and rolled to a stop. After switching the transmission back to the drive position the vehicle operated as normal and was driven to the home. The vehicle was later towed to the dealer. The cause of the failures were not yet determined. The manufacturer was not yet notified of the failures. The failure mileage was 40,000.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, and the brake warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with brake pressure failure on the braking system. The contact was informed that the software was misreading, and a software update was needed. The vehicle was repaired. The failure reoccurred. The vehicle was taken back to the dealer and diagnosed with a failed hydraulic unit. The contact was informed that the hydraulic unit needed to be replaced. The vehicle was repaired. The dealer advised the contact that the ABS module might also need to be replaced. The manufacturer was made aware of the failure and advised the contact to report the failure to the federal safety agency Hotline. The failure mileage was approximately 45,000.
Our 2019 Jeep Grand Cherokee started to exhibit the following conditions: brake lights remained ON, ESC failure, AutoPark Failure, Cruise Control failure, vehicle started without depressing the brake pedal. I researched possible recalls and found Z48 for HCU/ABS module failures. Our vehicle was in the recalled build dates. We took it to Palace Chrysler Jeep Ram Inc. in Lake Orion, MI for repair. They "reflashed" the software, cleared the fault codes and returned the vehicle to us. In 3 key cycles, the failures returned. We took the car back to the dealership. They stated that the reflash wasn't done correctly. (blamed machine error) Reset the fault codes and in 3-5 key cycles the problem returned. Now on the third try, the dealership replaced the HCU/ABS module and charged us $1,100 for the repair. We requested reimbursement from Stellantis and have been denied 3 times. This is completely unacceptable since the Recall Z48 is for this exact problem. Also, it proves that their SW reflash doesn't fix the problem in some vehicles. We want Stellantis to reimburse us for this repair.
Hello, The Z48 recall for my vehicle has been completed by the manufacturer back on 5/1/23. They have failed to notify the federal safety agency that the recall has been completed so it keeps showing up as incomplete. I keep getting notices in the mail that the recall is still pending. I have been back and forth with dealer, mopar, and the manufacturer with no resolution to this issue. Please see attached invoice with proof that this recall has been completed. I was hoping this open action could be closed on your database. Thanks, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that while reversing, the rear driver's side wheel made an abnormal grinding sound. The vehicle was taken an independent mechanic, where it was diagnosed that the brake shoes were loosened and needed to be replaced. The vehicle was not repaired. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 39,900.
Recall Z48 service was performed 02/09/23. Fox Jeep invoice #556304. Facility mechanic confirmed issue was present prior to performing recall as the brake lights remained on for several minutes after parking, shutting off, and exiting vehicle. Recall Z48 PCM update was completed. Vehicle continues to exhibit same issue with brake lights remaining on for several minutes after vehicle is parked / shut off / occupant exits. I believe Stellantis has a known issue with the ABS module in this vehicle and needs to replace the module with a properly functioning unit instead of attempting to conceal the fault through another PCM update. Attached copy of invoice from recall performed 02/09/23 @ 70,316 miles and photo of brake lights remaining on after exiting vehicle taken last week @ approximately 76,000 miles.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that while the vehicle was turned off, the ABS module failed to turn off and drained the battery. The vehicle failed to start, and the contact was left stranded. There were no warning lights illuminated. The vehicle was towed to the local dealer where it was diagnosed and determined that the ABS module needed to be replaced. The vehicle was not repaired due to the parts being on back order. The manufacturer was contacted but no additional assistance was provided. The failure mileage was approximately 20,000.
The contact owns 2019 Jeep Grand Cherokee. The contact stated that the vehicle could erroneously be started and go into gear without the brake pedal being depressed. Additionally, while at a stop light, the engine revved to 2500 RPM's and the brake pedal had to be pressed to prevent the vehicle from experiencing unintended acceleration. The same failure also occurred while his wife was driving approximately 55 MPH. The vehicle was taken to the local dealer and was serviced under the federal safety agency Campaign Number: 22V426000 (Service Brakes, Hydraulic) but the failure persisted. The vehicle was taken back to the dealer who later replaced the accelerator pedal; however, the failure persisted. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 50,000.
I was sent a recall notice ( Z48/the federal safety agency 22V‑426 ) and contacted the dealer to schedule. the recall is for the breaking system, and it took months to get an appointment, apparently bad breaks are not a concern? when I was finally able to get an appointment they claimed I had no recall? I described the issues to the service manager, and he said that I was experiencing the issue the recall was supposed to fix but they would not fix it as a recall, because they claim I do not have a recall despite getting more than 1 letter. the issue - the vehicle will not stop in and emergency situation. I have tried this at 25 MPH, and just slowed down, I have nearly hit other cars because I could not stop topping a blind hill. I have a long list of very scary examples. FCA says they will not add my vehicle to the recall list, so in case of a major crash or running over a child, I guess I will go public with legal backing. this complaint will also be noted that it was brought to your attention.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated that the exterior lighting system failed to operate as designed and malfunctioned. The contact stated that when he depressed the brake pedal, the brake light failed to operate as needed. The vehicle was taken to the dealer where it was diagnosed that the ABS control module software was updated; however, the traction control system failed to operate as designed. The check engine, the ABS, and the traction control warning lights were illuminated. The vehicle was taken to the dealer where it was diagnosed that the electronic stability control module needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall. The contact was advised to call the federal safety agency Hotline for assistance. The failure mileage was approximately 71,145.
The contact owns a 2019 Jeep Grand Cherokee. The contact stated received notification of the federal safety agency Campaign Number: 22V426000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that on several occasions after the vehicle was started or while driving at various speeds, the service brake warning light and the electronic stability control warning lights intermittently illuminated. The vehicle was taken to the dealer where it was diagnosed that the failure was related to the recall however, the part to do the recall repair was unavailable. The contact stated that the technician opted to replace the entire module. The vehicle was not repaired. The manufacture was notified of the failure and the contact was informed that no parts were available for the recall repair. The failure mileage was approximately 41,000.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Jeep Grand Cherokee?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history