Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). I have had this to the dealership 4 times to be fixed without success. Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly.
2022 Jeep Grand Cherokee driver assistance complaints
Page 2 of 3: complaints 11 to 40 of 58, newest first, as owners wrote them.
Issue has occurred at least 4 times: upon start, vehicle infotainment system appears in Italian language (difficult to revert to English as menu controls are now in a foreign language). Forward Collision OFF warning light illuminates on dash. Vehicle settings show all forward collision warning systems are ON. Servicing dealership has not identified any Diagnostic Trouble Codes with forward collision warning systems. Only way to reset system is dealer service via propriety manufacturer software. Multiple other Jeep Grand Cherokee owners reporting same problem: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2022 Jeep Grand Cherokee. The contact stated that the vehicle had experienced a brief intermittent display of the rearview camera image while reversing. The vehicle was taken to the dealer, where the radio software update was performed under the federal safety agency Campaign Number: 24V436000 (Back Over Prevention); however, the failure recurred. The vehicle was taken back to the dealer, where an unknown repair was performed; however, the failure recurred. The vehicle was taken back to the dealer, where the contact was advised that the vehicle needed to be retained for servicing. The vehicle remained at the dealer for 7 months. The dealer had replaced the two side cameras, the control module and had performed the software update with the assistance of a Jeep factory engineer; however, the failure persisted. The engineer determined that the camera wiring harness needed to be replaced; however, the part had been discontinued. The engineer determined that the wiring harness needed to be bypassed, and a patch cord needed to be installed. The dealer called the contact and informed the contact that the rearview camera was operating as intended after the installation of the cord patch. The contact declined the vehicle repair with a cord patch and inquired about buy-back assistance. The contact stated that the cord patch reduced the integrity of the vehicle. The manufacturer was notified of the failure. The failure mileage was approximately 28,000.
The Forward collision Warning light came on again after switching to Italian. Dealership says the warranty just ran out but this multiple times this happens and clearly it has not been fixed. FCW issue
Screens switches to Italian, also screens freeze or go blank, Front Collision Warning (FCW) light illuminates and can't be turned off. Bluetooth randomly disconnects, Auto door locks don't engage; paddle shifters for manual gear selection cease functioning, pedestrian avoidance, automatic emergency braking, and high-beam assist stop working; memory seats unexpectedly adjust while driving. I have to bring the car to the dealer to fix this, this happens every 14 days or so.
Earlier this spring, when we started our 2022 Jeep Grand Cherokee, the language had changed itself to Italian, the units were metric, the ‘Forward Collision’ off icon was stuck on the dashboard. Also the paddle shifters did not work. In May, 2025, we paid $204.41 to Gary Mathews Motors in Clarksville, TN to ‘diagnose’ and ‘fix’ the issue. Fast forward to this month, and the issue happened again! They didn’t ‘fix’ anything. See forum where HUNDREDS of other owners are experiencing the same exact issues: [XXX] Also see Star bulletin regarding this issue: [XXX] From what I can see in the forums, there is no permanent fix for this issue. Despite this, Jeep/Stellantis keeps charging customers to ‘diagnose’ and ‘fix’ the issue which is a scam/fraud since they know there is no permanent fix. I have reached out to Jeep, and been promised follow-up from one of their specialists that never comes. I have all transcripts and promised timelines to expect follow up that never happen. I will attach photos where they admit they haven’t met the timeline for follow up that was communicated, and as of now, despite additional promises of communication/follow up I still have not heard from them. Having a forward collision system that does not function properly puts myself and others at risk. Also having a dash in units/language you do not understand is also a safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Hello, I am reaching out to formally escalate an ongoing safety concern with my vehicle’s reverse guidance system, which continues to malfunction despite multiple service visits. This issue directly affects my ability to safely operate the vehicle and creates a daily hazard while backing up. I have already taken my vehicle to the dealership multiple times, and each attempt has failed to resolve the problem long-term. I have also contacted Jeep Corporate and was assigned Case Number, which has since been escalated to a case manager. However, the issue remains unresolved, and I am no closer to a permanent fix. This problem is especially concerning given the recent Jeep recalls involving camera, rear-visibility, and electrical/software issues. The recurring malfunction in my reverse guidance system appears to be directly aligned with the types of failures documented in these recalls, further reinforcing that this is not an isolated defect. At this time, I am requesting the following: 1.Immediate review and escalation of my case. 2.A definitive corrective action plan to permanently repair the reverse guidance system. 3.Confirmation on whether my vehicle qualifies for any recall-related repairs, software updates, or component replacements related to rear-visibility systems. 4.If the issue cannot be corrected, I am requesting that Jeep explore goodwill options, including replacement or repurchase consideration, given the repeated failures and ongoing safety risk. I have been patient throughout this process, but the unresolved malfunction of a critical safety system is unacceptable. Please respond as soon as possible with next steps. Thank you, [XXX] [XXX] [[email protected]] Vin [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The system has many errors, The primary issue is the forward collision warning indicator light is on showing that the service is off. But it isn't, you can go into the system settings and turn the service on and off without issue. The light stays on. It does work as far as I can tell also. It seems to be causing the paddle shifting to be disabled. I can't downshift going down a steep grade and am being required to use by brakes. Which can be very dangerous. It is causing another issue that I cannot recall at the moment. There is another issue with the settings of the vehicle randomly changing to Euro type metric settings. The clock changing to 24 hour, tire pressure changing to kpa? mph changing to kph, all the different unit of measurements changing over. Randomly, not at the same time but consistently every few weeks. At first it seemed like it was connected to a monthly software update, but now its random. The vehicle has been taken to a Jeep dealership in Sherman, tx about the issue of the Forward collision system and they fixed it. Then the problem reappeared a month afterward. I've called and they confirm that the correct US software is installed. I am the only driver of the vehicle, so no one else is changing the settings. I work a full time 9-5 job and do not work close to a dealership, which has become an issue for these matters. All the issues I have had with the vehicle seem to be related to them updating the software without my approval. Currently my vehicle has 71k miles on it and won't be covered by the 50k warranty. The warning light issue started after 50k miles.
randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp).almost caused crash twice!!!
Randomly, & without warning, the instrument cluster & Uconnect display will glitch and flicker off then on but switch into language I do not speak or understand (Italian). Coinciding with language switch, instrument cluster & radio display settings revert back to default settings, paddle shifter becomes inoperative (with no menu option to enable), forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change & menu option to switch units back to Fahrenheit gone, auto tilting mirrors in reverse off . ***This is clearly a dangerous situation because of all the functions &gauges that change while driving & the fact it is difficult if not impossible to recover from this due to the language of the setting menus, & the complexity of finding & navigating menus to try to wade through all the settings menus &change setting back, some items cannot be reset (like the FCA off lamp and temp units). I have taken it to the dealer for diagnostic, they found no error codes but found service bulletin S210800193 and S2108000221 performed IPC Customer programmable features Configuration to temporarily correct the issue, but it happened again 3 weeks later. I had to pay $254 for this service, and the issue isn't fixed. Here is an example forum discussion, indicating many if not all vehicles are affected: https://www.jeepgarage.org/threads/forward-collision-warning-off-light-is-stuck-on.250301/#replies Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins https://dot.report/bulletins/11006236 Because this is dangerous and very distracting while driving (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs.
While driving all warning lights were activated and power steering completely failed. The vehicle was in drive and fully charged
Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer 7 times, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over two years. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While driving on a local neighborhood street at approximately 38 miles per hour, ( cruise control possibly engaged) , all the lights on my dashboard suddenly illuminated. A messages appeared stating that service was required for every guidance and braking system. At that moment I became concerned, so I attempted to use the brake. Despite pressing the brake pedal as hard as I could, the car did not slow down. I cannot remember if I downshifted using the paddle shifters on the steering wheel, but I was able to coast to a manageable speed and pull into a parking lot. I then turned the vehicle off and on again, but all the warning lights remained on the dashboard. After waiting for about five minutes, the vehicle was restarted, and this time none of the warning lights were on. Since I was very close to home, I drove the rest of the way very slowly. Later, I searched online and discovered that other people have experienced this same problem. Some of the information I read suggested that water can get into a component, and it had been raining on the day of the incident and the day before. My primary safety concern is what would have happened if I had been approaching a stoplight or driving on a freeway where I needed to stop suddenly. I am confident that I would not have been able to stop in time to avoid a crash. It is frightening to think of what could happen if a child were to run into the street and this happening. I immediately made an appointment with my local Jeep dealership. The dealer has since driven the vehicle 98 miles but has not yet been able to replicate the issue.
This happened 4 tines before Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
This vehicle has had multiple recalls. Anytime that I call in to get serviced. I receive one of these responses from their service department: they can’t replicate the issue, if the lights that came on are no longer on they cannot tell what the problem was, or they fixed it. I’ve had multiple calls and service request with the dealership as well with Stalantas and Chrysler capital. I have pictures of different lights that go off in the dashboard whether it’s the hybrid service whether it’s engine hot, whether it’s the driver assist not working, “vehicle ready to drive”while it’s been driving a while, other issues that I’ve had regarding the components in the vehicle the AC and heat not working properly where you can have it on heat and it doesn’t heat anything or you can have it on AC and it doesn’t cool anything. And then it fixes itself and it starts to work again a few days later. The center screen goes blank sometimes. The radio button on and off sometimes it does not turn on. Sometimes when in reverse the safety system will go off and abruptlystop the car when there is nothing behind it. Currently the vehicle is at the local dealership department in their service department because of a blown gasket, also a known recall per previous research. The only department to inspect the vehicle is JT‘s service department local Jeep Dodge ram dealership have placed numerous calls to manufacture, trying to get them to buy back vehicle.
On April 12th my husband and I were driving our Jeep after it had a recall and update to fix the recall of a battery issue on all 4xE models. We were doing 45 mph down the road and it threw an error code that said “Service Hybrid Electric Vehicle System”, “Service Emergency Braking System” the Jeep then shut off and said for us to push the brake and press start for us to turn the car on in the middle of the road. We were able to safely get off the road, when we came to a stop the car put itself into park automatically. We had to start it a couple of times to make sure it was ok to turn around and drive home. It was then towed to the dealership. They told us they could see the issue logged in the system but they could not replicate the same issue after driving it. They told us that we had to come and pick up the Jeep and I told them how unsafe that made me feel for us and everyone on the road. They told us there’s nothing they could do for us. We got the car back and another issue arose where are Passive Entry Switch became corroded and our car kept unlocking itself throughout the night. The day we got it back from them we were driving it and we got the same “Service Hybrid Electric Vehicle System” again. So I brought our Jeep back again and they told me in the service department they’ve been working with the engineers at Jeep and they are waiting for an update to fix it and it’s one of four in the area with this issue and Jeep is fully aware of the severity of the issue. They also told me they would be holding on to our car until it’s fixed. I was called by the head of the service department at that dealership and was told they need their loaner car back and they got word they’ll maybe have a fix for our car in November. They knowingly gave us our completely unsafe Jeep back and told us to try for Lemon Law - with all parties knowing the severity of the security and lives put at risk on the road. We have gotten this error code many times and are told there is no fix
I have code B273C-00 digital crash input on my jeep. This is the code dealerships were informed if they see this code the vehicles have to be grounded. At this time, there is no remedy for the grand cherokees. The dealership can't release my jeep back due to safety reasons, and it's been with them for over an month and counting.
After having my 22 Jeep Grand Cherokee at OBX Jeep in NC for over 10 months for electrical and camera issues it was shipped to Brown Daub Jeep in Easton, PA for overdue PA State Inspection due to the length of the repair in NC. Supposedly OBX Jeep said it was repaired but car immediately had electrical issues including FCW OFF dash light. The PA Jeep dealer corrected electrical issues following Jeep Star Publication and it was returned to me July 3, 2025. FCW OFF dash light has come back on on [XXX] and OBX Jeep is indicating I must again leave it with them to further diagnose the issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem.
"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Without warning or being given an option to reject the update, my vehicle was updated to settings that no longer offer paddle shifting or the ability to enable or disable the Pedestrian Emergency Braking (PEB) system. The latter results in being unable to turn off the Forward Collision Off light on the dashboard. The update also wiped out most of my settings and changed units of measure to the metric system. According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to re-enable safety features, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer four times. They provide fix that last a week, then say there is nothing they can do and to wait for a possible software update, but none has come and it has been almost a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs and have all paperwork from the four Jeep visits. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The vehicle in September of 2024 after a software update randomly changed the settings. The forward collision off warning light remains on (in settings the forward collision is "on", the language changed to Italian, the paddle shifters stopped working, the units changed, and the grid for the backup camera was turned off). I had it serviced at Jeep. They reset the vehicle which temporarily fixed the issue, however, 3 weeks later it happened again. There is a known MOPAR/star case number S2108000249. This is also reported in Jeep Forum. My safety is at risk due to the failure of the forward collision warning light/software malfunction. I feel that I am at risk for a forward collision. Also the paddle shifters don't work.
I have some major safety concerns with my 2022 Jeep Grand Cherokee, specifically with the AEB. Today was the SECOND time that my automatic emergency braking came on while I’m driving down the highway at 60 mph. The first time was in November. The roads were dry, no other cars coming toward me, driving on a straight stretch, with one car a safe distance behind. My jeep went from 60 to 0 slamming on the brakes so hard and flashing the AEB lights and dinging on the dash. Seat belts locked up tight and gave you a hard fast whip lash forward. Very terrifying like what is even happening?! The car behind me thank goodness had enough time to slam on their brakes and not rear end me! As fast as you could even comprehend what was happening, the lights and dinging stop and you can drive again. I was like maybe a leaf or something blew over the sensor and kind of wrote it off because nothing came up on my Jeep app. Fast forward to today, February 25th. Again roads are dry, no one is coming towards me, driving 60 mph in a straight stretch and wham the auto emergency brakes slam on again! Hard brake from 60-0 mph. AEB lights flashing and dinging, locking seat belts and whiplashing your head forward as you screech to an uncontrolled stop. I had absolutely no control over my brakes or gas! This time I’m livid bc my children were in the car with me! Thank goodness everyone was properly wearing seatbelts and in car seats, and I had both hands on the steering wheel, and it was not on a bend in the road because this could have been very dangerous and not ended well! This is NOT ok and there is nothing at all that blocked a sensor or would have had any reason to cause the Jeep to engage this feature. I should not have to be afraid to drive my Jeep and now it’s literally terrifying to drive it bc you never know if it’s going to happen. It needs addressed and fixed ASAP and all Jeep owners should be made aware of this very dangerous situation!
The Adaptive Cruise Control and Automatic Emergency Braking have not worked properly for over a year. Sometimes I get a message that the AEB/ACC is not working and to see the Dealer other times i have a light lit showing it is not working. On some occasions there are no signs of it not working but ate ACC works like the regular cruise control and does not slow the car down unless you apply the brake. The car has been to the dealer 2 pervious times with no long term fix it is now there again out of warrantee waiting to be fixed. last time was 05/06/24
One my navigation is lost second my stop and start button light is on and most importantly the sensors seem off changing lanes beeps at wrong time I feel these things seem wrong a few times now
The contact owns a 2022 Jeep Grand Cherokee. The contact stated that while driving at an undisclosed speed, the forward warning collision light illuminated. The vehicle was taken to the dealer, who determined that a system reset was needed following an over the air software update. The vehicle was repaired but the failure reoccurred. The manufacturer was notified of the failure but provided no assistance instead advising the the contact to take the vehicle back to the dealer. The failure mileage was 41,000.
My Jeep, when using adaptive cruise control, will occasionally apply emergency breaking when a vehicle passes alongside me in an adjacent lane in the same direction of travel. I’ve had other cars directly behind me when this happens and it appears to other drivers like I’m “break checking” them. Usually it’s triggered when the passing adjacent vehicle is a tractor trailer or a truck pulling a trailer. Furthermore, the actual early warning forward crash detection does not work at all. I have no warning lights alerting me of a malfunction.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2022 Jeep Grand Cherokee?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history