The front passenger seatbelt wasn’t working properly and we noticed the belt was frayed so we ordered a new one from car parts direct. Today while taking the old belt out we noticed that the seatbelt unit itself wasn’t bolted into the jeep. It was bolted off to the side causing it to be crooked which is why the belt frayed because the entire unit was not in properly. The bolt that should be holding it in is still in the jeep yet the seatbelt unit came out very easily and you can clearly see where the bolt was sitting. I will include photos.
2016 Jeep Wrangler seat belts problems
10 complaints (2% of all complaints for this car). Typical mileage when it fails: 50,700. 1 crash reported.
- owner complaints
- 10
- of this car's complaints
- 2%
- typical mileage
- 50,700
- crashes
- 1
- recalls
- 1
Which part fails
Owners did not name a specific part.
At what mileage
Complaints by mileage at the time of the problem.
Jeep Wrangler seat belts problems in other years
Related recalls
Seat belts: front: anchorage
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
- Risk
- A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
- Remedy
- FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1‑800‑853‑1403. FCA's number for this recall is VA6.
Recall number 19V680000 · Recall details
Related investigations
Seat belt buckle bracket failure
On July 17, 2019, the federal safety agency's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-008 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging the driver's side seat belt buckle separated from the seat frame, rendering the seat belt non-functional. The VOQs involved model year (MY) 2015 and 2016 Jeep Wrangler (JK platform) that were configured for right-hand drive (RHD) use. On August 8, 2019, ODI issued an information request (IR) letter to FCA.The scope of the IR included all JK Wrangler produced for sale in the U.S. (both left- and right-hand drive), and amongst other things, requested any reports or allegations of driver's seat belt bracket failures on these vehicles. In its review of FCA's response, ODI determined that approximately 1.7 million JK Wrangler were produced from MY 2007 to 2018, about 16,000 of which were configured for RHD. ODI notes that the RHD Wrangler are typically used for rural postal delivery which often experience a more severe duty cycle. Also RHD JK was was not produced in MY 2007.As explained in the IR response, FCA identified three distinct populations of JK Wrangler concerning the driver's seat belt bucket bracket; specifically the MY 2007-2018 LHD (~1.7M units), the MY 2008-2010 RHD (4,563 units), and the MY 2011-2018 RHD (11,463 units) populations.FCA provided details on the designs used in each of these populations, identifying specific differences deemed pertinent to the strength and durability of each unique bracket design. FCA further reviewed its analysis of the complaint and warranty data identified under the IR, and noting that it had not identified any allegations of bracket failures on the LHD population, and only one allegation on the MY 2008-2010 RHD vehicles. By comparison, FCA identified 24 allegations of bracket failure for the MY 2011-2018 RHD JK, including two reports duplicative of the VOQs. Neither the FCA nor the VOQ reports allege an injury or fatality due to bracket failure. Based on this analysis, FCA decided to conduct a safety recall for the MY 2011-2018 RHD JK population. On September 30, 2019, FCA submitted a Defect Information Report initiating the federal safety agency Safety Recall 19V‑680 (FCA No. VA6). Under the recall action, FCA will replace the driver's seat belt bracket on MY 2011-2018 RHD Jeep JK Wrangler. The repair will be conducted free of charge.In view of FCA's recall action, and its explanations of the scope of that action, ODI is closing PE19-008. ODI will continue to monitor the non-recalled RHD, and the LHD JK Wrangler for evidence of seat belt bracket failure and will take further action if warranted.The three VOQ reports cited above can be reviewed at under the following reference numbers:11190251, 11218472, 11231639.
PE19008
What 2016 Jeep Wrangler owners say
Most recent owner complaints, unedited.
My 2016 jeep wrangler, is having major issues. My seatbelts completely stopped working last week February 3, 2023. I had left the mechanics because I had the back window replaced, and the back hood of my jeep wrangler. When pulling out of their driveway, I realized my seatbelt was very tight, but I still got to hook it. When I got home from my drive one and a half hours away, I went to use my car and the seat belts would not work. Driver side and passenger side seat belts have completely seized. Has my jeep wrangler 2016 had any recalls. My son died December 10, 2019. I have never had any other problems with my jeep wrangler. I believe in jeep and the company who makes them. The body shop told me to get rid of my jeep. I cannot do that and since my son died in my jeep wrangler and drug dealers threw him in the back seat, letting him die after they stuck him with a needle full of fentanyl. Please help I do not want to part with my jeep wrangler. I am sure with the Vin number you will be able to trace anything that has gone on with my Jeep! I could have missed many recalls because my son was very sick, from 2016 until his death 2019. I purchased the car brand new in 2016 in upstate New York. Please tell me how I can get help so my seatbelt will work again and the airbag can be inspected. It must be a recall issue I can’t think of anything else and I need your help. I now live in Port Charlotte, Florida, and I am near my daughter. This jeep wrangler has been very good to us. It saved my son’s life and his girlfriends in that prior accident. Something is very wrong with the seatbelts and possibly the mechanisms attached to the seat, bag, and seatbelts. I’m not sure. But the jeep is a fantastic vehicle and I love it. Please help or call me 518‑421‑7073. Thank you very much. Lori.
The contact owns a 2016 Jeep Wrangler. The contact stated that the air bags, seat belts, and ABS warning lights remained illuminated. The vehicle was not diagnosed or repaired. The VIN was not included in the federal safety agency Campaign Number: 16V288000 (Air Bags). The manufacturer was not notified of the failure. The failure mileage was 130,000.
My 2016 Jeep Wrangler with 53,000 miles on had the airbag light come on and when I went to have it checked it was due to a Occupant restraint control module malfunction. I was told this might not allow the airbags to deploy and that it could even deploy spontaneously. I have seem all kinds of recalls across the years for OCR related items(especially from FCA/Chrysler) https://www.automotiveworld.com/news-releases/chrysler-statement-occupant-restraint-control-orc-module/ You can inspect if you would like. Dealer noted the ORC was malfunctioning.
I buckled my seatbelt and felt it slip as if it had come unbuckled. The seatbelt was latched, but the metal between the latch and the seat frame had broken in two. The only thing holding the seatbelt latch was the wire and it's covering. Vehicle was stationary when I noticed the problem.*dt the consumer provided photos of the defected seatbelt. *tr
While putting on the seat belt the anchor bracket just broke off right above the bolt. I bought the car new in 2016 and only has 62,300 miles. But this part should never ever break. The car was stationary. *dt *dt *dt *tr *dt
Two months after I purchased my jeep I had an issue with rear seatbelt getting stuck and noticed a slight tear in fabric. Recently, when I went to get car inspected that the tear was bigger and the car failed massachusetts inspection. So, I paid $400 to replace entire seat belt (my husband thought the dog had chewed), not realizing the defect had occurred long before we had gotten the puppy. The work was done at ohara in falmouth. Wait for parts was absurd. Customer service was terrible. Not even a month after the work was completed and the seatbelt torn again.! At this point, I inspected all my seatbelts and notices that both rear seatbelts (not the middle) and the front passenger belt all have the same exact tear tight where the buckle falls on the belt. I would love to blame the do, but the dog has not been allowed in the vehicle since the repair. Jeep/chrysler does not seems to believe that this a product quality defect or a manufacturer issue. They also have no explanation as to why the seatbelts are tearing and claim that it must be something that I am doing with the vehicle. Considering the fact that I have only had 4 passengers ride in my backseat since the repairs , I am baffled. This is a major safety concern. I would think seatbelts should be fairly durable, but these are not. I am disgusted at chrysler's response and am concerned about the safety of these belts. I cannot spend $1200 to replace belts that may only last a month! I have attached pics this defect. Eatbelts and I have wasted over $400(plus$35 for a rejection sticker) on a repair that did not fix the defect in the seat belt. Dealership has been no help. This is not only very disappointing, but very inconvenient ; as we can not use the rear seats with out seatbelts and therefore this is a major safe ty issue. Please contact me at your earliest convenience.
I received the recall for the federal safety agency 16v‑734 and the dealer refused to perform recall with out me paying more than $300 because my after market bumper with integrated crush cans would be too hard for them to work on. It is an arb bumper
On january 30, 2017 another vehicle pulled out in front of me and stopped. I hit that vehicle with my 2016 jeep wrangler at about 30-35mph. The impact totaled both vehicles. My jeep's frame was buckled and twisted all of the way to the rear bumper. The rear body mount bolt were even bent. The airbags didn't deploy and the seat belts didn't pretension. I hit the dash with both knees and got abdominal muscle injuries as well as severe whiplash. I am still under a doctor's care for my injuries including a pinched nerve between c5-c6. Fca opened an investigation and sent me a letter stating that "the rate of deceleration necessary to activate the air bag and air bag system was not present during this accident". The impact buckled my frame and totaled a 5 month old vehicle, but fca wants me to believe that it wasn't severe enough for the air bags to deploy. Fca is either being deceptive or their vehicles are simply unsafe. Either way, due to their deceptive actions, it is impossible to know how many accidents are truly related to this vehicle defect. I found out about the recall (s76) the week after my accident when I filed a complaint with fca. My vehicle was in the dealership for its first oil change two weeks after this recall was issued, but it wasn't repaired and I wasn't informed of a recall. I received my recall notice today, 74 days after my accident. I have the police report, pictures of the jeep and the frame, the insurance adjuster's cell phone number as well as all correspondence with fca, should you want it...updated 05/09/17 *bf updated 9/27/18
Our jeep has a recall for a sensor wire in the front area of the vehicle. I dropped the jeep at the dealership (mall of georgia chrysler jeep in buford ga) and received a shuttle ride home. I was called a few hours later by my advisor [xxx] and told that I needed to remove the winch, winch plate, light bar, and lights on the front bumper. The tech needs to remove grill and cannot with this equipment in the way. They offered to remove all the equipment for me for $250. I told the advisor ([xxx]) that the letter received in the mail is adamant that this is to be done at no cost to the owner. He told me that it did not include custom equipment. I called fca, as my letter explained I should do if the dealer was not resolving my issue. I explained the situation as I have above. The fca agent (I do not have her name, but gave them my info) first indicated to me that there should not be any charges for recall repairs, so she called the dealer, talked to [xxx], and came back to my line telling me exactly what [xxx] had told me that a charge would be expected to remove the custom equipment so they can repair this vehicle. Should there ever be a reason for charging a customer for a recall repair, in a safety recall situation such as this?
Questions about the 2016 Jeep Wrangler seat belts
Does the 2016 Jeep Wrangler have seat belts problems?
Owners have filed 10 complaints about the seat belts of the 2016 Jeep Wrangler, 2% of all its complaints.
At what mileage do 2016 Jeep Wrangler seat belts problems start?
The typical (median) mileage in owner complaints is 50,700 miles.
Was there a recall on the 2016 Jeep Wrangler seat belts?
Yes, 1 recall: 19V680000. Check your VIN to see if your car still needs the free repair.
What year does the Jeep Wrangler have the most seat belts problems?
The Jeep Wrangler model years with the most seat belts complaints are 1997 (35 complaints), 1998 (17 complaints) and 1994 (16 complaints).
Other 2016 Jeep Wrangler problems
Brakes 139Engine 94Airbags 77Transmission 74Electrical 57Acceleration 36Driver assistance 28Steering 28Body 18Fuel system 14Wheels 9Suspension 8Visibility 6Seats 4Lights 3Tires 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history