The doors, hinges, hood and other places is rusted, bubbled and huge 1-2" pieces of paint are coming off the 2018 Jeep JL Rubicon Unlimited at 32-35k miles. This is absolutely unacceptable when my unrestored 1988 Jeep Comanche is rust free! Been to every dealership around and they confirm it's an issue with these, but refuse to fix.
2018 Jeep Wrangler body problems
97 complaints (5% of all complaints for this car). Typical mileage when it fails: 4,000. 1 crash reported.
- owner complaints
- 97
- of this car's complaints
- 5%
- typical mileage
- 4,000
- crashes
- 1
- recalls
- 1
Which part fails
- Body90
- Interior panels: sun visor2
- Frame and members: underbody shields2
- Body: door: hinge and attachments1
At what mileage
Complaints by mileage at the time of the problem.
Jeep Wrangler body problems in other years
Related recalls
Structure: frame and members
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
- Risk
- An unexpected reduction in steering ability, can increase the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is UA5.
Recall number 18V675000 · Recall details
What 2018 Jeep Wrangler owners say
Most recent owner complaints, unedited.
1 - rear door opened while driving, door was checked closed before driving on 7/14/26, it is available for inspection 2 - safety for others were at risk, as some of contents exited vehicle on road 3 - have an appointment on 7/21/26 with original cr dealer 4 - waiting on car dealer to inspect it 5 - no warning lights or messages, first apppeared on 7/14/26
After several decades of producing the JK model Wrangler, Jeep transitioned to a JL model midyear 2018. There are essentially two distinct 2018 Jeep Wrangler models. Jeep (Stellantis) has accepted responsibility for a safety defect for the JL model years 2019 through current. This recognized defect affects heavy corrosion on the hinges for the doors which creates an extreme safety concern. My 2018 JL Wrangler has the same failure, same part, same time frame, but was unjustly excluded by build date. 6 of the 8 door hinges and surrounding body have various levels of corrosion. My dealer just completed a recall for a steering damper which is widely categorized as a concern for 2018 and 2019 JL Wranglers. This is irrefutable proof that 2018 JL Wranglers were built through the same assembly line process as 2019 and later versions. The safety concern I've described above should be included in the open factory recall that Jeep/Stellantis has accepted as their responsibility. I have contact customer service for Jeep/Stellantis multiple times. They refuse to hear my concerns, were incredibly unprofessional, and have hung up on me numerous times.
Paint, bubbling and corrosion not declared as a defect by the jeep dealership. I would have never purchased knowing this information. I am looking for a goodwill repair of the defect of mixed metal causing corrosion on the body. Jeep states I am out of the extended warranty for repair. I am hoping to open a claim to get a repair of this manufacturing defect that was not disclosed in good faith to me.
My 2018 Jeep Wrangler JL has a known corrosion issue TSB31-001-19 and TSB31-002-20. Corrosion on doors and hinges and spot welds. I have called local dealers and they won’t help. I got with the Jeep help line and they gave me a case number and said they would not be doing anything about it. They never gave me the opportunity to send pictures of corrosion in said areas. There is a Goodwill program that I asked about and was refused so I’m reaching out to the federal safety agency and BBB to get some help with this issue. This is a well known and documented issue and not owner negligence. The Case# given to me was 94287282.
After filing my first concern with the vehicle and attempting to rack my brain with answers to why a 2018 is falling apart at the seams, I can only come up with either fraud, or the vehicle has been modified in major ways and glued together only to fall apart every bump I go over. After some reading I’m questioning 49 CFR part 565 form that was turned in after I purchased the vehicle means that I possibly have a replica, “remanufactured”, or altered vehicle. I’m not sure of the legality of selling a vehicle built from whatever vehicles I have, I do know that parts are not all the same years upon scanning modules I got some strange replacement identifiers that I will send. I also question if it really passed emissions being that my short term fuel trim sensor passed the catalytic converter on both sides stays over 99% consistently, also one of the “inspection” reports was done 2 minutes apart and the paper states that the vehicle passed at 5:08 then failed at 5:10 pm the same day. Not many vehicles tend to try again after passing and 2 minutes apart. I would have never bought a vehicle that not only has random foreign parts but a 2015 vehicle is also showing up under module information. I’ll never have recall information, and it seems that every system in the vehicle meant to warn or save me and my family when driving is compromised completely, yet somehow someone was allowed to pretend that I was buying a 2018 jeep Sahara unlimited with no record on carfax that what I am paying over 50 grand for with tax doesn’t just get bad gas and jump half the road when I hit a bump “because it’s a Jeep”. I should have been made aware that I was buying something scrapped, and that the odometer could be from any of them. I would like to receive a report of the form filed months after I purchased the vehicle and my entire jeep changed description and was no longer being monitored for safety. The IPC, BCM, TCM, and ECU aren’t properly communicating, and panels are all shifting.
After purchasing seems the vin was updated with information I was not disclosed. The bcm has never worked correctly the instrument panel is erratic and even with a code reader showing P codes there’s no check light. The steering makes the entire vehicle jump over half a road. Blind spot monitors don’t know what to do sometimes they are unavailable, odometer has all 9s sometimes. I did all the checks on the vehicle at the time and what I was given showed I had a 2018 4 door Sahara and that was what I was led to believe. After having issues and getting my registration I started looking at everything more because the dealer registered me as a commercial passenger truck(still don’t know why) but found a report that says Moab/sahara and my seems my vehicles body chasis and motor are all over the place. I’m pretty sure the engine is failing as at one point in one of the reports I found it stated it failed emissions. But the overall worst is that the suspension looks like it came off the titanic compared to the body panels, there’s a lot of welding and rusted or “appearingly tampered” pieces in the chassis and the vehicle seems to be coming apart at every seam. I am currently not driving it because it looks to have sank down to where it could be dangerous I’m pretty sure the suspension, frame, and axles aren’t rated for what’s on it and sounded like something may be coming off at the wheel or axle area last time I did drive it. The vehicle I thought I was purchasing had safety guidelines and there is 2.0 parts, 3.6 parts on this along with random other countries parts. It was bought used “As-Is” but not under the pretense that they assembled it by hand from leftovers. It wouldn’t pass safety standards or emissions in a foreign country much less in the UNITED STATES. I am starting here but will be seeking legal counsel. No longer certain I even have a jeep frame or chassis or just some panels stuck to a rusting timebomb. I’ve only drove like 8,000 miles. Now I’m scared to
There is paint bubbling on all 4 doors near the hinges and bottom of the door, as well as the hood of the vehicle.
Paint peeling, bubbling. Has been happening for over 2 years. Doors and hinges and hood.
The contact owns a 2018 Jeep Wrangler. The contact stated that there was rust was forming on the driver's side door hinges. The contact checked the passenger’s side door and there was a small amount of rust forming on the door hinges. The contact examined the door and saw that the entire bottom length of the passenger’s side door was rusting out. The contact drove the vehicle to the body shop of the local dealer. The vehicle was checked, and the contact was informed that the doors needed to be replaced. The contact was informed by the body shop that the rusting on the passenger’s and driver's side doors and hinges was a known failure. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was 43,673.
Questions about the 2018 Jeep Wrangler body
Does the 2018 Jeep Wrangler have body problems?
Owners have filed 97 complaints about the body of the 2018 Jeep Wrangler, 5% of all its complaints.
At what mileage do 2018 Jeep Wrangler body problems start?
The typical (median) mileage in owner complaints is 4,000 miles.
Was there a recall on the 2018 Jeep Wrangler body?
Yes, 1 recall: 18V675000. Check your VIN to see if your car still needs the free repair.
What year does the Jeep Wrangler have the most body problems?
The Jeep Wrangler model years with the most body complaints are 2018 (97 complaints), 2000 (56 complaints) and 2001 (38 complaints).
Other 2018 Jeep Wrangler problems
Steering 1,117Suspension 343Electrical 269Transmission 178Engine 103Brakes 68Driver assistance 68Wheels 61Visibility 43Acceleration 24Fuel system 22Seats 14Airbags 13Lights 9Seat belts 9Locks 1Tires 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2018 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history