Driver's side seatbelt buckle will not stay latched. Dealer notified. *ak the consumer states that the passenger side seat belt does not work properly and the driver side seat belt does not work and is of track, with a wire exposed. (able to use both lap belts, but the automatic part which goes across the chest are inoperable) the motor runs constantly on the driver's side, when the key is in the ignition.
The worst 1992 Mazda 323 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Seat belts12
- Electrical1
- Engine1
- Seats1
- Steering1
Specific symptoms reported on the 1992 Mazda 323
Recalls 2
Electrical system: ignition: switch
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
- Risk
- If the ignition switch overheats there would be an increased risk of a fire.
- Remedy
- Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1‑800‑222‑5500, option#6. Mazda's number for this recall is 8715J.
Recall number 15V674000 · Recall details
Seat belts: front: webbing
- What is wrong
- Vehicle description: passenger vehicles equipped with front seat automatic shoulder belts. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly can become jammed in the rail rendering the shoulder belt inoperative.
- Risk
- A seat occupant may not be properly restrained in the event of a vehicle crash.
- Remedy
- Dealers will replace the passive shoulder belt assembly with a modified one (with additional dust lip) in vehicles which have experienced a problem. In vehicles in which the automatic shoulder belt functions properly, the rails will be inspected and replaced with modified rails if they exceed the inspection criteria.
Recall number 97V211000 · Recall details
See all 2 recalls for the 1992 Mazda 323
Defect investigations
Auto restraint system fail
There is no summary currently available
EA94039
Technical service bulletins for the 1992 Mazda 323 24
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak...
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Speedometer replacement procedure
- In accordance with federal regulations, follow the procedure listed below when replacing a...
- Battery test procedure requirements. tt
- Speedometer replacement procedure. tt
- Subject on passive seat belt retractor switch. yc
- Conditions with steering wheel slightly off center. yc
- Subject pertaining to mtx overhaul information. yc
What 1992 Mazda 323 owners say
Most recent owner complaints, unedited.
Driver's seatbelt stopped working, stuck in track.
Seatbelt rail was faulty per recall notice 97v‑211 and there were no parts available, the dealer has not been able to remedy the defect within a reasonable amount of time. Nlm
Intermittley driver shoulder belt locks up while in use which causes the driver not able to move safety, and may result a loss of vehicle control. Retractor is broken and need to replace. Please provide further information.
Seat belt restraints often do not retract upon opening of door,once it retracted so tightly on my son I had a very difficult time getting him out. Also the seat belt warning light goes off intermittantly even though we are properly belted. I do not trust these belts to keep us safe in an accident.
Ongoing problem with seat belt buzzer going off. Consumer had repairs done approximately two year ago, and problem reoccurred again. Dealer/mfr. Notified and refused to repair unless cost goes to consumer.
Great car, never spent a dime on it.
Ea94039, the driver's side seat belt is stuck in the retractor in the forward position. The problem has not been corrected.
The driver's side seat belt makes noise and the passenger's side stopped and cable is coming loose . Please describe .
On both sides of vehicle shoulder seat belts are stuck and only meeting half way.
Compare the 1992 Mazda 323
Other model years
Questions about the 1992 Mazda 323
Is the 1992 Mazda 323 reliable?
Owners have filed 15 complaints about the 1992 Mazda 323, close to a typical 323 model year.
What is the most common problem with the 1992 Mazda 323?
Seat belts, with 12 complaints. Next is electrical (1).
How many recalls does the 1992 Mazda 323 have?
2 recalls, covering electrical system and seat belts.
Was there a recall on the 1992 Mazda 323 seat belts?
Yes, 1 recall: 97V211000. Check your VIN to see if your car still needs the free repair.
What year does the Mazda 323 have the most seat belts problems?
The Mazda 323 model years with the most seat belts complaints are 1990 (13 complaints), 1991 (13 complaints) and 1992 (12 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Mazda 323?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history