2004 Mazda RX-8 technical service bulletins
203 technical service bulletins and manufacturer communications cover the 2004 Mazda RX-8.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This bulletin supersedes the previously issued bulletin(s) listed below
- Product Quality Information (PQI) DESCRIPTION Service Information MT-041/12 is no longer valid
- This bulletin supersedes the previously issued bulletin(s) listed below
- This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red....
- Exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows
- Some customers may complain about a noisy HVAC blower motor or odor after a cabin air filter replacement
- Exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems
- Exterior trim heat damage when parked near a glass building or Low-E windows
- Speedometer replacement procedure
- Some customers may complain of signs of oil on the struts or shock absorbers
- This service bulletin provides testing and charging procedures in order to promote proper battery...
- Accessory instructions can be found on OneMazda under Dealer Resources
- The Mazda DCA-8000 is required for all warranty battery testing
- Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote...
- Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission...
- Ethanol is becoming a common additive in gasoline
- Ethanol is becoming a common additive in gasoline
- This service bulletin provides information regarding the proper use of the driverâs floor mat to avoid...
- Accessory instructions can be found on OneMazda under Dealer Resources
- Exterior trim heat damage when parked near a glass building
- Subject: UPDATE
- The Mazda DCA-8000PM is required for all warranty battery testing
- Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in...
- When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine
- When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging
- If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake...
- In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak...
- Some customers may complain that the steering wheel is off center more than 3° even when driving straight...
- Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems
- Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO...
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Some automotive cleaning products contain strong acid or alkali
- Mazda infotainment systems require contacting the proper source for diagnostic support, parts...
- On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system
- Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle
- This service bulletin provides information regarding the proper use of the driver's floor mat to avoid...
- Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear...
- The Mazda GR8-1291 is required for all warranty battery testing
- Some customers may complain of signs of oil on the struts or shock absorbers
- If a vehicle has body vibration or steering wheel shimmy while driving and the root
- Mazda North American Operations has approved an additional on-car brake lathe as an option for...
- This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any...
- The Mazda GR8-1291 is required for all warranty battery testing
- When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine
- The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step...
- Stopper plates for air bag module connectors have been established as new service parts.
- In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator...
- In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles,...
- Some customers may complain that the ambient temperature display is not accurate, or it takes too long for...
- Display shows inaccurate ambient temperature
- Take caution when cleaning plastic headlight lenses
- Takata recalls general information purpose: this page was created to assist with handling takata air bag...
- Ids update 101.00 and 101.02 is now available on MS3 under the "ids/infotainment" tab.
- Some customers may complain about improper operation of the auto-dimming mirror
- When reprogramming a control module, always use the GR-8 battery management system power supply mode
- This article provides HVAC heater/defroster operating tips using mode selector dial
- When installing a navigation sd card, confirm that the card is unlocked. also, mazda does not recommend...
- This article provides HVAC heater/defroster operating tips using Mode selector dial
- When installing a navigation SD card, confirm that the card is unlocked
- Some customers may complain about a blurry rear view monitor display
- Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on...
- Some customers may complain about a blurry rear view monitor display
- Some customers may complain about a blurry rear view monitor display
- Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on...
- Some customers may complain that the steering wheel is off center more than 3° even when driving straight...
- Some customers may complain that the steering wheel is off center more than 3" even when driving straight...
- Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging
- Mazda guidelines for factory scheduled maintenance
- Paint damage Mazda pocket paint guide
- Battery test procedure requirements using the GR81291
- Proper usage of driver's floor mat.
- Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear...
- Some automotive cleaning products contain strong acid or alkali
- Mazda infotainment systems require contacting the proper source for diagnostic support, parts...
- Use the following repair procedure to minimize the need to replace the catalyst converter/exhaust pipe...
- Summary to be provided on a future date.
- Some customers may complain that the steering wheel is off center more than 3° even when driving straight...
- In accordance with federal regulations, follow the procedure listed below when replacing a...
- Mazda: an increased combustion, during air bag deployment, is due to inflator propellant material, that...
- Mazda north american operations received many requests from our dealers asking us to approve additional...
- This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any...
- Some customers may complain that the ambient temperature display is not accurate, or it takes too long for...
- Some customers may complain of condensation/fog inside the front or rear combination lights
- Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle
- Some vehicles may exhibit a chattering noise and the driver-side seat lift cannot be adjusted because the...
- This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination...
- Some customers may complain that the ambient temperature display is not accurate, or it takes too long for...
- Mazda has developed factory recommended scheduled maintenance services that support all major vehicle...
- Mazda: on some vehicles, to avoid potential interference of foot placed on pedals, information is provided...
- This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any...
- Some customers may complain of signs of oil on the struts or shock absorbers
- Some customers may complain of condensation/fog inside the front or rear combination lights
- The multi information display (MID) and navigation system support for diagnostics, parts authorization,...
- Mazda: clunk/bang noise during first forward movement after sitting. this is a normal operating noise of...
- Mazda: there is condensation and fog in the front and rear combination lights
- Mazda: hesitation/idle vibration due to cracked engine mount. on some vehicles with manual transmission...
- Mazda: noise from front of vehicle/stabilizer control link broken
- Mazda special program (MSP16) - engine lack of power -PCM reflash
- Some vehicles may experience a MIL with DTC P2070 (ssv stuck open)
- Engine lack of power
- Engine cranks no start
- Ignition coil inspection
- Availability of non-required tools
- Water in rear combination light
- Malfunction indicator lamp (MIL) illuminated - P2004 set
- Headlight auto-leveling malfunction indicator light illuminates
- Manual transmission-clutch hard to disengage
- Non genuine accessories affect air bag operation
- Mazda modular diagnostic system (m-mds) steering wheel angle sensor module self test shows fail
- TPMS valve stem breaks when removing aftermarket valve stem caps - service tip
- Engine misfire diagnostic procedures - service tip
- Broken rear license plate attachment
- Difficulty starting engine crank
- A malfunction indicator lamp with diagnostic trouble code (DTC) P0300-0302 (misfire) when running, after...
- Fuel distributor insulator-removal / installation cautions-service tip
- P0442, P0455, P0456 set in powertrain control module (PCM)
- Airbag warning light illuminated - DTC B1994 and/or B1998 set
- Battery replacement - service tip
- Engine cranks no start
- Diagnostic trouble code P0336 (eccentric shaft position sensor range/performance) at time of engine start
- Engine stalling at idle, P0172 (fuel trim too rich) after engine replacement, intake manifold...
- Satellite enabled audio units
- Battery replacement service tip
- Power window inoperative
- Service program msp 04 campaign to reflash the power control module due to vehicles failing to start in...
- Evaporative emmissions and reciver adapters
- Squeal noise from front brakes during braking
- Chips and scratches on front seatback cover - leather seats
- Driver side air bag rattle
- Whine/squeal from engine at idle
- Phantom fan speed indicator
- Grease oozing from audio switch
- Tire pressure monitoring system (TPMS) warning lamp illuminated and a warning buzzer no diagnostic trouble...
- Interference between trunk, rear combination lamps and/or rear bumper
- Dealer notice - service bulletin release - 08/26/2004
- Battery test procedure requirements
- Speedometer replacement procedure
- Mazda special program (MSP04) - engine no start, lack of power, diagnostic trouble codes P2107, P2108,...
- Navigation system voice guidance
- Gear range indicator change
- ABS/tcs light on/lack of power
- Clicking noise from rear wheels
- Programmable module installation
- Lack of air conditioner cooling performance and / or a noticable temperature fluctuation from the vents
- Low oil level warning light comes on when level is not low
- Engine cover grommets missing
- B28 and later PCM calibration update information
- Power train control module (PCM) configuration (PMI) problem wds B28.0
- Module configuration
- The manual for the RX8 recommends using api service GL-5 SAE-90 oil for differential lubrication
- Malfunction indicator lamp on with diagnostic trouble code P0128 and/or P0456
- Temperature control dial and/or fan control dial break or come off
VIN decoder
See the problems and recalls for an exact car
Buying a used 2004 Mazda RX-8?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history