Mazda Tribute recalls
There are 20 safety recalls on record for the Mazda Tribute, covering 906,258 vehicles in total across all the models in each campaign. Newest first.
Mazda Tribute recalls by model year
All recalls
Fuel system, gasoline: delivery: fuel pump
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2010-2011 Tribute vehicles manufactured March 3, 2009, to May 26, 2011. On vehicles with a 3.0L engine, the Fuel Delivery Module (FDM) may crack, causing a fuel leak.
- Risk
- A fuel leak in the presence of an ignition source increases the risk of a fire.
- Remedy
- Mazda will notify owners, and dealers will replace the FDM flange with one that has a redesigned fuel supply port, free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety recall were mailed on December 23, 2016. Owners will receive a second notice when remedy parts are in stock. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 0416J.
Recall number 16V788000 · Recall details
Power train: automatic transmission: lever and linkage: floor shift
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2008 Tribute vehicles manufactured February 9, 2007 to April 22, 2008. The affected vehicles have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.
- Risk
- If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.
- Remedy
- Mazda will notify owners, and dealers will inspect the transmission and if necessary tighten the manual shift lever bolt or replace the manual shift lever assembly, free of charge. The recall began on November 30, 2015. Owners may contact Mazda Customer Experience Center at 1‑800‑222‑5500, option#6. Mazda's number for this recall is 8815J.
Recall number 15V677000 · Recall details
Hybrid propulsion system
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2008 Mazda Tribute Hybrid vehicles manufactured October 10, 2006, to May 23, 2008. The coolant pump for the hybrid system may fail, resulting in the hybrid electronics overheating.
- Risk
- If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash.
- Remedy
- Mazda will notify owners, and dealers will replace the original Motor Electronics Coolant (MEC) Pump with an improved brushless pump, free of charge. The recall began November 5, 2014. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 7814I.
Recall number 14V552000 · Recall details
Steering: electric power assist system
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2008-2011 Tribute vehicles manufactured October 5, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist.
- Risk
- If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
- Remedy
- Mazda will notify owners and dealers will update the software for the power steering control module (PSCM) and the instrument cluster module, free of charge. If a vehicle shows a history of a loss of the torque sensor signal or fault codes relating to the PSCM when the vehicle is brought in for the recall remedy, the affected components will be replaced, free of charge. The recall began in July 2014. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 7614E.
Recall number 14V282000 · Recall details
Structure: frame and members
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
- Risk
- A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
- Remedy
- Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. The recall began on May 29, 2014. Owners may contact Mazda at 1‑800‑222‑5500. Mazda's number for this recall is 7514D.
Recall number 14V174000 · Recall details
Vehicle speed control: cables
- What is wrong
- Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.
- Risk
- A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.
- Remedy
- Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1‑800‑222‑5500, option #6.
Recall number 12V357000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. The brake master cylinder reservoir cap can leak brake fluid. If brake fluid leaks, it could come in contact with the antilock brake system (ABS) module wiring harness connector.
- Risk
- Corrosion may develop in the electrical connector leading melting, smoking or possible fire.
- Remedy
- Mazda will notify owners, and dealers will replace the vehicle's brake master cylinder reservoir cap and modify the ABS electrical system, free of charge. Until the repair has been performed, vehicle owners should park their vehicles outside. The safety recall began on june 22, 2012. Owners may contact mazda at 1‑800‑222‑5500, option 6.
Recall number 12V016000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- On certain sport utility vehicles equipped with antilock brakes (ABS), the ABS module connector may have missing or dislodged wire seals. This condition could allow contamination to enter the module connector, creating a potential for an electrical short.
- Risk
- An electrical short might cause an ABS malfunction that would illuminate the ABS warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. This condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
- Remedy
- Dealers will inspect the wire harness connector to the ABS module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. The dealer will also inspect the connector on the ABS module and replace it if it is found to be corroded or damaged. The recall began on may 9, 2007. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 07V157000 · Recall details
Seats: front assembly: head restraint
- What is wrong
- Certain sport utility vehicles equipped without side air curtains or moon roofs fail to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact." during testing, the free motion head form registered a measurement above the permitted limit at the left hand a-pillar trim area.
- Risk
- In the event of a vehicle crash, personal injury to occupants may occur.
- Remedy
- Dealers will make modifications to the energy absorbing material located above the headliner in the affected area free of charge. The recall began on may 31, 2006. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 06V116000 · Recall details
Visibility: windshield wiper/washer: motor
- What is wrong
- On certain trucks and sport utility vehicles, the windshield wiper motor may have been produced without grease applied to the output shaft gear.
- Risk
- After a period of continuous use on the high speed setting, lack of grease on the output shaft gear may cause the gear teeth to distort or fracture during operation resulting in the loss of wiper function. Inoperative wipers under inclement weather conditions could cause a crash due to impaired visibility.
- Remedy
- Dealers will inspect the wiper motor for the presence of grease and grease the wiper motor gears if necessary. The recall began on november 28, 2005. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 05V525000 · Recall details
Latches/locks/linkages: hatchback/liftgate: lock
- What is wrong
- Certain 2004-2005 sport utility vehicles and certain 2001-2003 sport utility vehicle having rear liftgate components serviced with 2004 equivalent components fail to comply with the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention components.' the rear liftgate latching system does not meet the inertia load requirement in one direction.
- Risk
- If the liftgate is left unlocked, there is the potential that it may open during a crash.
- Remedy
- Dealers will replace the rear liftgate latch release rod, the release rod attachment clip and the door handle return spring. The recall began on march 31, 2005. Owners should contact mazda at 1‑800‑222‑5500.
Recall number 04V605000 · Recall details
Vehicle speed control: cables
- What is wrong
- On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
- Risk
- An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
- Remedy
- Dealers will replace the accelerator cable. The recall began on january 28, 2005. Owners should contact mazda at 1‑800‑222‑5500, option #4.
Recall number 04V583000 · Recall details
Power train: automatic transmission: control module (TCM/PCM/tecm)
- What is wrong
- On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
- Risk
- Should the engine stall, a vehicle crash could occur.
- Remedy
- Dealers will reprogram the power control module (PCM) with the appropriate calibration. The recall began on may 3, 2004. Owners should contact mazda at 1‑800‑222‑5500.
Recall number 04V175000 · Recall details
Seat belts: front: buckle assembly
- What is wrong
- On certain sport utility vehicles, a post within the safety belt buckle covers could fracture, which could affect latch function, resulting in either a "no latch" or "partial latch" condition. In the "partial latch" condition, the buckle tongue can be inserted into the buckle and appear to be engaged, but will release from the buckle without the push button being depressed when a relatively low load is applied, such as when an occupant moves slightly in the seat.
- Risk
- In the event of a crash, the seat occupant may not be properly restrained, increasing the risk of injury.
- Remedy
- Dealers will have the driver and front passenger safety belt buckle cover removed and replaced with a newly designed service buckle cover. Owner notification began february 5, 2004. Owners should contact mazda at 1‑800‑222‑5500.
Recall number 03V515000 · Recall details
Visibility: windshield wiper/washer: linkages
- What is wrong
- Vehicle description: sport utility vehicles. The windshield wiper linkage can disengage due to a broken ball socket.
- Risk
- This condition will likely result in sudden and complete loss of the windshield wiper function, or of the wiper function on the driver side only, increasing the risk of a crash.
- Remedy
- Dealers will inspect and, if necessary, replace the wiper module.
Recall number 00V387001 · Recall details
Equipment: other: owners/service/other manual
- What is wrong
- Vehicle description: certain sport utility vehicles fail to comply with requirements of fmvss no. 225, "child restraint anchorage systems." the owner's manuals do not indicate which seating positions are equipped with child restraint anchorages. Also, the manuals do not explain the markings in the vehicles that locate the lower anchorages.
- Risk
- In the event of a crash, the child seat may not be properly attached increasing the risk of injury to the child.
- Remedy
- Owners will be provided with revised owner manuals.
Recall number 00V323000 · Recall details
Fuel system, gasoline: delivery
- What is wrong
- Vehicle description: sport utility vehicles. The o-ring seals in the fuel line connector at the outlet end of the fuel filter were damaged when the line was connected to the filter during vehicle assembly. In some cases, this damage could result in a fuel odor, or possibly in fuel dripping from the connection.
- Risk
- Fuel leakage, in the presence of an ignition source, could result in a fire.
- Remedy
- Dealers will inspect and, if necessary, replace the fuel line.
Recall number 00V277002 · Recall details
Wheels: hubcap/cover
- What is wrong
- Vehicle description: some 4x2 sport utility vehicles not equipped with an antilock braking system may have inadvertently been built with 4x4 rear hubs instead of 4x2 hubs. If the incorrect hubs are installed on a 4x2 vehicle, the rear wheels can loosen, or in some cases, separate from the vehicle.
- Risk
- This condition could cause loss of control of the vehicle, increasing the risk of a crash.
- Remedy
- Dealers will inspect the rear hubs and, if necessary, replace them.
Recall number 00V260002 · Recall details
Steering: steering wheel/handle bar
- What is wrong
- Vehicle description: sport utility vehicles. These vehicles may have a mis-assembled or incorrectly manufactured nut that attaches the steering wheel assembly to the steering column. The nut could be upside down in the steering wheel assembly, which could overstress the steering column shaft when the nut is tightened. In addition, some of the nuts may have been cracked during manufacture resulting in the nut fracturing when it is tightened during vehicle assembly.
- Risk
- Either of these conditions can lead to the steering wheel becoming loose or separating from the steering column, resulting in loss of steering control.
- Remedy
- Dealers will inspect and replace the steering wheel retention armature and, if necessary, the steering column to correct this condition.
Recall number 00V223002 · Recall details
Vehicle speed control
- What is wrong
- Vehicle description: sport utility vehicles equipped with speed control. The speed control cable can have a cracked or missing speed control cable servo cap locating tab. The locating tab could enter the servo clutch cavity and interfere with the speed control servo clutch. Also, water could enter those units that contain a cracked or missing servo cap locating tab, eventually causing corrosion that could interfere with the function of the speed control.
- Risk
- If either of these conditions occurs and the speed control is used, the speed control could prevent the throttle from returning to idle, resulting in a stuck throttle. A stuck throttle could result in a crash.
- Remedy
- Dealers will inspect the speed control cables. Vehicles with speed control cables from cavities 3 and 4 will have the cable the speed control servo replaced.
Recall number 00V210002 · Recall details
Questions about the Mazda Tribute recalls
How do I check if my Mazda Tribute has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Mazda Tribute have?
20, covering fuel system, gasoline, power train and hybrid propulsion system.
VIN decoder
See the problems and recalls for an exact car
Buying a used Mazda Tribute?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history