The contact owns a 2012 Mercedes-Benz C300. The contact stated while driving 35 MPH, the contact heard an unusual noise coming from the rear of the vehicle. The vehicle was taken to the dealer, and the mechanic stated that the rear subframe was rusted and the passenger’s side rear control arm was detached from the subframe. The vehicle was repaired. The manufacturer was contacted and stated there was no recall for the failure. No other assistance was offered. The failure mileage was 43,960.
2012 Mercedes-Benz C300: ball joint or control arm failure
7 of the 267 complaints about the 2012 Mercedes-Benz C300 describe ball joint or control arm failure.
- owner complaints
- 7
- of this car's complaints
- 3%
- recalls
- 0
Ball joint or control arm failure by model year
What owners say
The contact owns a 2012 Mercedes-Benz C300. The contact stated that upon parking the vehicle at the dealer parking lot, she heard abnormal sounds coming from the rear of the vehicle. There was no warning light illuminated. The dealer diagnosed that the rear subframe was severely corroded and the rear control arm was detaching from the subframe. The dealer diagnosed that the subframe needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the federal safety agency Hotline. The failure mileage was approximately 79,000. The contact was informed by the service advisor that the vehicle should not be driven until it is repaired due to the extensive damage to the subframe.
- Right Rear Subframe; Yes, available for inspection. - My mechanic told me that driving the car more than 2 miles or at a high rate of speed was very dangerous. He told me there that if the car braked quickly or was driven at a high rate of speed that there was a very good chance of an accident. There is a risk of the right control arm detaching from the frame; this could cause the car to be uncontrollable with the right rear wheel and control arm detaching from the vehicle. - Yes, the issue was confirmed by my mechanic, who works at an independent service center. - No. - There were no warning lamps or messages. I had begun to hear a loud clunking noise, usually when braking.
I was traveling at roughly 55mph when I had to make a sudden deceleration due to another vehicle pulling out in front of me. When I applied the brakes, the car unexpectedly pulled violently to the left nearly causing a head-on collision with an on coming vehicle. After Googling the symptoms/scenario, I found that this can be caused by a rusted and failed rear suspension subframe. The control arms for the rear wheels become detached from the subframe as a result. Based on my research, this seems to be an extremely common occurrence. So much so that Mercedes Canada and Mercedes Germany are replacing the defective subframes free of charge as they’ve concluded the cause to be “inadequate corrosion protection” applied to the inside of the subframe. It seems as though they’re rotting from the inside out. After learning everything about the issue, I pulled my car on to ramps in my garage and was able to confirm that my subframe had indeed failed. This is a serious safety issue which is being addressed elsewhere. During my research I was unable to find a recall or TSB related to this issue, only hundreds of people stating that Mercedes forcing customers to cover the cost to repair this extremely dangerous manufacturing defect.
This is a followup to a previous report. I now have photos and the actual part that was replaced. While driving on secondary road at 45 mph, braked for stoplight in 2012 Mercedes C300 4matic. Car veered left, rear swung right, and right front dove downward. Luckily regained control and prevented swerving into oncoming traffic. Took car to my regular mechanic and it was determined that the welds on the left rear portion of the rear subframe had rusted out from the inside of the subframe, severing the attachment to the left rear wheel control arms. The car had been inspected 6 months earlier and there was no sign of problem. The failure was catastrophic, not gradual. Upon removal, it was also noted that the right mounting bracket was also in the process of rusting through and failing. When the mechanic called the local Mercedes dealer, the service manager was not surprised and proceeded to outline what parts would be needed to carry out the repair. When I contacted the local Mercedes dealer, myself, they said this wasn’t an uncommon problem, but there was not recall or service bulletin on the problem. Was given a rough quote of $5000 to affect the repair. I also contacted Mercedes Benz USA and was told there were no recalls or service bulletins, but they might be able to provide some “Goodwill Assistance” to offset the expected cost if I had it towed to a MB dealer and got a quote from them. Benzworld.org, an owners forum with over 5 million participants world-wide https://www.benzworld.org/threads/w204-rear-subframes-deterioration.3048088/#post-17965564 has multiple postings about the problem as do other forums including CarProblemZoo.com https://www.carproblemzoo.com/mercedesbenz/c300/suspension-problems.php . This design/manufacturer defect has had recalls in both Europe and Canada. Why this is not being addressed in the US? This sudden failure is potentially life-threatening.
While driving on secondary road at 45 mph, braked for stoplight in 2012 Mercedes C300 4matic. Car veered left, rear swung right, and right front dove downward. Luckily regained control and prevented swerving into oncoming traffic. Took car to my regular mechanic and it was determined that the welds on the left rear portion of the rear subframe had rusted out from the inside of the subframe, severing the attachment to the left rear wheel control arms. The car had been inspected 6 months earlier and there was no sign of problem. The failure was catastrophic, not gradual. When the mechanic called the local Mercedes dealer, the service manager was not surprised and proceeded to outline what parts would be needed to carry out the repair. When I contacted the local Mercedes dealer, myself, they said this wasn’t an uncommon problem, but there was not recall or service bulletin on the problem. Was given a rough quote of $5000 to affect the repair. I also contacted Mercedes Benz USA and was told there were no recalls or service bulletins, but they might be able to provide some “Goodwill Assistance” to offset the expected cost if I had it towed to a MB dealer and got a quote from them. Benzworld.org, an owners forum with over 5 million participants world-wide https://www.benzworld.org/threads/w204-rear-subframes-deterioration.3048088/#post-17965564 has multiple postings about the problem as do other forums including CarProblemZoo.com https://www.carproblemzoo.com/mercedesbenz/c300/suspension-problems.php . This design/manufacturer defect has had recalls in both Europe and Canada. Why this is not being addressed in the US? This sudden failure is potentially life-threatening.
The rear subframe has corroded around the areas where the trailing arm and control arm meet the subframe on both sides of the vehicle, and has disintegrated around the drivers side rear trailing arm causing it to have detached, along with a piece of the subframe. The metal of the subframe is distorted around the area of the break. The detached trailing arm and piece of subframe are now making contact with the fuel tank as well. The fuel tank could have easily ruptured and ignited when this car was still in operation, as this car was driven for several days before the manufacturing defect was discovered. The failure happened when coming to a gentle stop from 20-30 miles per hour on a straight road. There was a loud snapping noise from the drivers side rear. This car had 92,000 miles at time of the structural failure and has been regularly serviced, exclusively at mercedes-benz. Mercedes-benz USA customer service is unable to offer any assistance. This exact issue has LED to a recall of the same model in canada, and there are countless the federal safety agency reports describing similar structural failures. Mercedes-benz USA is aware of this issue and is also aware that there is a recall in canada, but has made it clear that goodwill will not be extended.
Service bulletins that may apply
- Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements...
- Potential corrosion on the rear axle carrier
- Potential corrosion on the rear axle carrier
- Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements
- Clunking noise from front axle suspension strut or rear axle shock absorber on short strokes of the damper
- Xentry (mercedes): with steering at full lock, noise CAN be heard, like knocking and/or creaking, coming...
Related recalls
No recalls on record for this model year.
Questions about the 2012 Mercedes-Benz C300 ball joint
Is ball joint or control arm failure a common problem on the 2012 Mercedes-Benz C300?
7 of 267 owner complaints about the 2012 Mercedes-Benz C300 (3%) mention ball joint or control arm failure. The model year with the most reports is 2013.
Is there a recall or service bulletin for this on the 2012 Mercedes-Benz C300?
There are 0 recalls and 7 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2012 Mercedes-Benz C300
VIN decoder
See the problems and recalls for an exact car
Buying a used 2012 Mercedes-Benz C300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history