I just purchased a 2011 Mercedes C300. I was told that for the past 2-3 years the vehicle would constantly bald out the rear 2 tires and would need replaced every 3 months. As I was driving the vehicle I noticed that the rear tires would make weird noises as if it was hutting something. Upon further investigation the rear sub frame is rotted, which based on research appears to be a very common problem with these vehicles. The rear sub frame is rotted in which caused the lower control arms to completely rot off of the frame posing as a serious safety issue for me when driving with my children and a safety issues for others when I drive on the road. On top of that due to the lower control arms completely rotting off the frame it caused the control arms to hit the gas tank which could catch the car on fire. Mercedes has refused to issue this as a recall in due part to their negligence. Customers cannot afford to pay $5000 for a rotted subframe due to negligence from Mercedes. Please research how many vehicles have had rotted subframes for this vehicle. In Germany they will repair the rotted subframe free of charge. Mercedes needs to be held accountable for risking peoples lives.
2011 Mercedes-Benz C300: ball joint or control arm failure
17 of the 480 complaints about the 2011 Mercedes-Benz C300 describe ball joint or control arm failure.
- owner complaints
- 17
- of this car's complaints
- 4%
- typical mileage
- 105,000
- recalls
- 0
Ball joint or control arm failure by model year
What owners say
2011 C300 4matic Sport I'm very concerned about the front subframe after going over the invoice and everything that was replaced on the rear subframe due to a recall Mercedes issued. But wait doesn't the whole subframe have severe rust corrosion all throughout yes it does per mechanic/technician. I'm having steering issues while driving the vehicle when applying the breaks the vehicle pulls very hard to the left the whole car swerves to the left very dangerously. After getting it checked out the mechanic/ technician pointed out that the control arm snapped from the Front subframe due to severe corrosion. I'm not understanding how the recall was only for the rear subframe only. The whole entire subframe is severely rusted. Front subframe which may experience premature wear of the front axel carrier and a fracture risk, potentially resulting in sudden loss of steering control. After internal endurance testing determined the front axle carrier supplied for certain Mercedes SUV’s and cars may weaken prematurely. An investigation revealed the root cause of the problem was due to a manufacturing defect in which the parts did not receive proper corrosion protection. My front subframe did not receive the proper corrosion protection. It's available for inspection. It's currently still at the dealership due to being unsafe to drive. I'm having steering issues while driving the vehicle when applying the breaks the vehicle pulls very hard to the left the whole car swerves to the left very dangerously. The problem has been reproduced or confirmed by a dealer or independent service center. The vehicle or component has Not been inspected by the manufacturer, police, insurance representatives. Only Dealer and independent service center did the inspection. No warning indicators no other symptoms, this issue took place around February - March of 2023. When I received the letter about the subframe recall I was excited thinking the issue would be fixed. But No it's unsafe
The contact owns a 2011 Mercedes-Benz C300. The contact stated while driving approximately 60 MPH, the brake pedal was depressed, and the rear end of the vehicle pushed out. The contact looked underneath the vehicle and noticed that the subframe was rusted. The vehicle was taken to an independent mechanic who informed the contact that the control arm had detached. The contact called the local dealer, but the vehicle was not diagnosed or repaired. The manufacturer was contacted but no additional assistance was provided. The failure mileage was approximately 105,000.
The control arm is currently freely hanging. The reverse subframe rusted out where the control arm connects to it causing severe swaying when braking.
I was teaching my 16 year old son how to drive when he got his learners permit . When we got onto the highway a car cut him off and he had to apply a firm steady brake . When breaking the car swerved from the rear into the other lane , nearly striking another vehicle . This also resulted in a loss of control when applying heavy breaking after I had him pull over and I took control of the vehicle once I was able to get the car to the shop I pulled the rear wheel s off and inspected the brakes , which were found to be in good condition . I looked around the vehicle and noticed where the rear driver side subframe connected to the control arm broke off from a manufacturer defective weld or poor selection of materials . component. Upon inspection both sides are perforated and have lost structural integrity. Many other vehicles of the model type have reported similar issues online. This is a serious safety concern that will happen to 100% of these vehicles. A recall needs to be issued by Mercedes for this immediately. This vehicle has very little rust anywhere except at these connections .
Rear suspension crossmember mounting point for one of the control arms broke off allowing control arm to fail. Possible entire wheel assembly could now fail creating dangerous driving conditions especially at higher speeds. Took to a shop and confirmed. Called Mercedes dealership and they said it was not covered by a recall even though in Europe I believe it is. Many websites have said this is an ongoing and common problem.
I have a 2011 Mercedes C300 that I purchased as a Certified Vehicle - this car was purchased at The Mercedes Dealer in Kansas City. I believe I purchased it around 2013 - I have recently found out that the rear sub frame is completely rusted out. I have had the car repaired at my auto shop - Not a MB dealership, as there was not a dealership that was able to see the car in any reasonable amount of time and the car was not safe to drive. The only way I found out about this rusted out subframe was due to the control arm breaking off - This car was very dangerous to drive and in essence, it is probably a good thing that the control arm broke as this could have resulted in a loss of steering on the vehicle and a very dangerous accident! I have been reading online and speaking with MULTIPLE people who have had the same situation with this rear subframe. This is CLEARLY an issue with MB and clearly an issue that they have been made aware of. When I called the NMB service department they were a month out to just look at the car - and the part is on back order I was told - which CLEARLY indicates a lot of these rear sub frames are being replaced. I am attaching various articles / forums online that I just, at a glance, composed a list of. There are a TON of stories of these sub frames rusting out for various models. Seems to be tied mostly to the C300 vehicles. I am attaching pictures of this rusted out subframe and an invoice that I paid to have the car repaired for this issue. The ironic thing is when I was at this auto shop, there was another C300 sitting out front that had just had the same rusted out subframe replaced. Mercedes has a recall in Canada for this SAME issue and other countries have acknowledged this is a major safety issue. A rear subframe should not rust out and leave the driver with no way to steer the car. Mercedes has refused to acknowledge this is an issue in the US.
Rear Sub frame faiIure / rusted and rotted On this site alone there are complaints listed under 3 different heading Structure (30) / SUSPENSION (38) / UNKNOWN OR OTHER (20) all related to the rear sub frame. not to mention 100's on the web. I nearly died when I hit the brakes the car lurched to the left at highway speed. My mechanic told me that the rear Subframe was rotted and the rear control arm is no longer connected to the sub frame He insisted that the car is UNSAFE to drive. He was very surprised as the car only has 70,000 miles on it and in good shape with no rust anywhere else on the car. I did a quick search of the issue on the web and immediately found that MB has had this issue across the world in various models manufactured in 2011-2014. Presently, there are recalls in Germany and Canada for this issue. I contacted my MB Service department and was informed that no recall for this issue exists in the US and they would not cover the costs to repair. The repair could cost between $5k to $7k They told me that I would need to contact MB North America Customer Service. I find it amazing that MB Service, Dealers and North America HQ are all aware of this issue but the Company will not issue a recall or stand behind their product. This not some minor defect. When a major structural component of the car is compromised the lives of vehicle occupants and others on the road are at risk of death due to a major accident. The vehicle is now undriveable and will cost several thousands of dollars to repair. MB is fully aware of this issue and refuses to do anything about it. the federal safety agency needs to address this issue and make the Manufacturer stand behind their Quality pledge which as a consumer you are paying for when purchasing what you expect to be exceptional German engineering and what you are given is a a product with a known defect that will not be addressed.
Rear Subframe Rot. The vehicle was purchased July 2021 from Automax Of Frederick Maryland. I took the car to Euromotors of Bethesda and they informed me about the issue so I took it back to the dealership because the car was sold to me like this and the owner of the dealership let me know that his "guys" would have never passed it in the MD inspection if a hole was about to be there or severe rust. However it was still sold and now I have the problem of where one of my control arms are rusted out and the car is not safe to drive. The dealer also let me know that the rust was just "surface rust" and it was nothing to worry about. The dealer ask me to bring the car in to inspect and lifted and let me know they would put a ticket on it if the car gave me any problems they would take care of it. Never got anything from them.
Manufactory defect on w204 Chassis Mercedes Benz rear sub frame rusting allowing control arm to brake free affecting safety and drivability control loss, which has or could lead to severe accident. There no recalls for this defect and is a common issue with materials on back order for the rear sub frame, vehicle Is not drivable until frame is replaced.
08/15/2022 (date statement was wrote not date of incident) While driving into work at 50 miles an hour, traffic started to slow. While applying brake heard loud pop and vehicle rear end lounged right making steering difficult, I immediately released the brake and control came back I then gently applied the brake again to slow vehicle and felt slight clump from rear. This was very disconcerting my vehicle never had performed in that manner which made me feel very uncomfortable continuing driving, I had mechanic look at vehicle and was told the rear subframe had rusted and the rear left control arm broke away from frame??? My vehicle is very well maintain and just a little over 11 years old. Feeling belittled I began investing Mercedes’ forums and found this has been an issue with some of not all models and nothing has been done to correct this defect. I contacted Mercedes’ Benz and the service department knew exactly what it was and stated the is no recall on these failing subframe due to rust. This is a very serious safety issue due to the fact of loosing control of the vehicle when this component fails possibly causing serious injury or even death. To put insult to injury Mercedes has no plan to replace it and it’s left to the consumer to replace this non maintenance item. Looking into forums about this issue these subframes have failed at almost every odometer mileages, particularly the w204 chassis 2008-2014. A safety recall should be advised to the consumers whom own such vehicles!! Safety First!!!!!!!!! Respectfully, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
The car started fishtailing slightly when the brakes were applied at speeds around 25 MPH. First it was taken to a Mercedes dealership on June 24th where they said it need a sway bar and tires. They were not sure that would address the issue. When we went to get tires, the tire person said the control arm was connected to nothing in the rear. The rear subframe was rotted to the point that there was not a place to even weld it back on to and needed to be entirely replaced. The fact that Mercedes missed it is shocking in itself, I can only assume (we bought the car used) it was rotted from use in winter weather before we got it. The repairs have been estimated to cost between $2200-3800-.
Service bulletins that may apply
- Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements...
- Potential corrosion on the rear axle carrier
- Potential corrosion on the rear axle carrier
- Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements
- Clunking noise from front axle suspension strut or rear axle shock absorber on short strokes of the damper
- Xentry (mercedes): with steering at full lock, noise CAN be heard, like knocking and/or creaking, coming...
Related recalls
No recalls on record for this model year.
Questions about the 2011 Mercedes-Benz C300 ball joint
Is ball joint or control arm failure a common problem on the 2011 Mercedes-Benz C300?
17 of 480 owner complaints about the 2011 Mercedes-Benz C300 (4%) mention ball joint or control arm failure. The model year with the most reports is 2013.
Is there a recall or service bulletin for this on the 2011 Mercedes-Benz C300?
There are 0 recalls and 8 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2011 Mercedes-Benz C300
Fuel smell 26Steering lock-up 20Won't start 17Fuel leak 15Airbag light 12Check engine light 8No deployment 7Pulling 6Fuel pump 5Headlights 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 Mercedes-Benz C300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history