Tl*the contact owns a 1992 plymouth voyager. The contact discovered a recall pertaining to the ABS in his vehicle and took it to the dealer. He was informed that they were not warranting the repair. In 2003, the contact experienced brake failure and was informed that the repair was made under warranty at that time. The failure and current mileages were 11,800.
1992 Plymouth Voyager: brake failure
38 of the 701 complaints about the 1992 Plymouth Voyager describe brake failure.
- owner complaints
- 38
- of this car's complaints
- 5%
- recalls
- 2
Is there a fix? There are 2 recalls for this area of the car. See below
Brake failure by model year
What owners say
While driving brakes failed, as a result, vehicle was totaled. Dealer notified.
Upon receiving recall 91v170000 for brake pedal failure car was already in shop for ABS problems. When trying to press brake pedal, it would not move, it just stuck. This problem has happened several times on september 28, 2000. On august 30, 2000 put drums and pads, still didn't fix problem. Consumer was driving and making a turn, and ABS light and brake light came on at the same time, indicating no brakes. Consumer almost went over an embankment.
Prior to recall 96v099 vehicle had not experienced any ABS problems, after taking vehicle into dealer for the recall the vehicle began experiencing numerous ABS alerts and loss of braking. Nlm
When brakes were applied under normal conditions pedal went to the floor, resulting in extended stopping distance. Also, dealer replaced brake master cylinder. However, problem has reoccurred. Dealer will reinspect the vehicle.
Brakes were under recall & were repaired. Failed after being repaired, and consumer had them repaired again. After 2nd repairs, while driving and upon attempting to stop, brake pedal went to floor, and vehicle had no brakes. It swerved to miss hitting child & hit a parked vehicle. Dealer offered to repair brakes, again, for third time, for free.
Vehicle expeeriencing brake failure due to dual function switch in ABS system malfunctioning. Dealer notified and repair was made.
The anti lock brakes failed prior to/after recall repairs. Mr the ABS light was intermittent. The hyd assembly and the brake system was replaced. There was a grinding noise in the engine, transmission, and when braking. The repairs and or replacement parts are as followed: replaced the gasket, repaired the ground wiring of the ABS, replaced the serpentine belt and motor mount . The transmission shift was out of gear. The consumer has requested reimbursement. Scc
Owner has ABS brakes, ABS brakes failed twice and were repaired twice. Owner notes that she has had two accidents in result of brake failure and is very cocerned about the safety of this vehicle.
Brakes failed 15 minutes after warning light came on.
Applied the ABS brakes and there were no brakes, pedal went to the floor, causing two crashes; first collision occurred before receiving the recall letter and second collision happened after the vehicle was fixed. Please describe .
Abs, brake failure, compelte loss of brakes , pedal went to the floor, in for repair for faulty sensor that connects to the wiring harness.
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- The ABS hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
- Risk
- If this condition occurs, the ABS function could be lost and reduced power assist would be experienced during vehicle braking increasing the potential for a vehicle accident.
- Remedy
- Dealers will test the vehicle's anti-lock brake system and repair the vehicles if necessary. Also the warranty on all ABS components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). Owners will also be reimbursed for previous ABS component repair costs.
Recall number 96V099000 · Recall details
Service brakes, hydraulic: pedals and linkages
- What is wrong
- The brake pedal pad attachment to the pedal arm may not have adequate strength due to mislocation of welds, and could break.
- Risk
- Failure of the pedal pad to pedal arm attachment resultsin loss of braking ability, and could result in an accident.
- Remedy
- Replace inadequate brake pedals with properly manufactured pedals.
Recall number 91V170000 · Recall details
Questions about the 1992 Plymouth Voyager brake failure
Is brake failure a common problem on the 1992 Plymouth Voyager?
38 of 701 owner complaints about the 1992 Plymouth Voyager (5%) mention brake failure. The model year with the most reports is 1993.
Is there a recall or service bulletin for this on the 1992 Plymouth Voyager?
There are 2 recalls and 0 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 1992 Plymouth Voyager
ABS 102Seat belt 38Wipers 29Transmission failure 16Loss of power 15Power steering loss 13No deployment 12Stalling 9Engine failure 7Fire or smoke 7Spongy pedal 7Door locks 5Won't shift 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Plymouth Voyager?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history