Subaru Ascent check engine light comes on

Filed Nov 5, 2026 · Engine, Transmission · NV

Twin Falls Subaru left me in a dangerous position with my transmission failing catastrophically on the highway 72 hours after major service is a severe safety hazard My 2021 Subaru Ascent with 56,420 miles, still under the 60,000 mile/5 year warranty, went to Twin Falls Subaru with diagnostic codes P0137, and P2096 on 8/15/26 they replaced the following, the engine harness,. transmission harness, transmission pressure sensor and ecm. They said the root problem was the secondary pressure switch, Subaru of America & Twin Falls Subaru said those repairs weren’t covered under warranty and I had to pay $3000 out of pocket, SOA covered the remaining $5100. I picked it up 10/13/26, (on 10/16/26, three days later my check engine light came on along with the AT oil temp and transmission flashing on the dash, the diagnostic codes I received were P0700 P0841 P0890, Subaru Of America paid to have my vehicle towed back to the dealership where they said I needed a new transmission, but they weren’t covering it because my warranty had expired 14 days prior (on 10/2/26), during the time it was getting the first repairs done, they claimed that the two incidents had nothing to do with one another. The DPSM claims a transmission pressure switch failure that flooded the wiring harness with fluid is 'unrelated' to the transmission total collapse 72 hours later. They

Filed Aug 20, 2026 · Transmission · CO

1. The vehicle is experiencing a transmission malfunction/failure. The dealership was able to replicate the issue and confirm the malfunction, which caused the check engine light to illuminate. The vehicle is currently being evaluated by the dealership, and any failed components should be available for inspection upon request while the vehicle remains in their possession. 2.The transmission malfunction is affecting the vehicle's ability to accelerate, maintain speed, and operate predictably. This creates a potential safety risk when the vehicle loses power or experiences unexpected changes in operation while driving, particularly in traffic or at highway speeds. The concern is heightened because transmission failure can leave the vehicle unable to safely continue operating and can cause collisions with other vehicles on the road. 3.Yes. The dealership was able to reproduce the issue, which caused the check engine light to illuminate and confirmed that there is an active problem requiring further diagnosis/repair. 4.The vehicle has been inspected and evaluated by the Subaru dealership/service center. To my knowledge, it has not been inspected by police or insurance representatives. Subaru of America has reviewed my case and the repair history but has declined assistance with the repair or to open a case. 5.Yes. The dealership was able to reproduce the issue, which caused the check engine light to illuminate. The transmission problem was also associated with operation that prompted me to have the vehicle inspected. The check engine light illuminated when the dealership replicated the condition. This current transmission is a replacement transmission done by Subaru do to a previous recall of the same issue. The current transmission only has 83,000 miles on it.

Filed Aug 6, 2026 · Driver assistance, Electrical · NY

All the safety systems become disabled and check Engine light goes on because transmission fluid is being pumped Out of a faulty secondary pressure sensor part 31878aa020,( defective and replaced with 31878aa021), into the engines wiring at the car computer, transmission computer, and bulkhead connector in fuse box causing all sorts of engine codes. The setting of the engine code closes all the vehicles driver safety systems and changes the dynamic of the drivers driving experience. As the problem gets worse, it can render the car powerless on roads and highways making operation dangerous. I have my car parked in front of the house with the battery and electrical connectors unplugged. This problem is covered by one or more recalls and safety campaigns, but subaru refuses to fix mine and other peoples that I found on Facebook. Someone online listed a $6500.00 repair estimate. They just had it repossessed instead. This part causes the pressure differences that cause the jerky ride and is specifically alluded to in the recall, plus subaru even changed the part because it was defective.

Filed Jun 24, 2026 · Engine, Steering · 60,000 miles · NY

The contact owns a 2022 Subaru Ascent. The contact stated that while driving at an undisclosed speed, several unknown warning lights illuminated. The vehicle experienced a loss of power steering assist, the speedometer was inoperable, and the transmission failed to shift into gear. The vehicle was taken to an independent mechanic, who inspected the brakes and reset the check engine warning light, but the failure persisted. The vehicle was then taken to the dealer, who determined that the rear radar sensor module beneath the rear bumper had corrosion from car wash or road salt. The dealer replaced the rear radar sensor module and sealed it with silicone. The manufacturer was made aware of the failure, and a case was opened. The failure mileage was approximately 60,000.

Filed May 28, 2026 · Engine, Transmission · KY

While pulling up to a drive thru window the vehicle shuddered and the engine shut off. I lost all power steering and had to come to a stop, shift into park, then restart the engine. No check engine lights or warnings illuminated. There were no status messages to indicate what caused it to shut off. Also the driver side mirror shakes a lot, just like all the other reports say.

Filed May 10, 2026 · Transmission · KY

On 9-May, 2026, the vehicle was driven during the morning with no warning lights or indication of component failure. Vehicle was parked on the owner's driveway at approximately 13:00. Approximately 15:40 I started the Ascent’s engine, let it idle for about 60 seconds, buckled up and scanned dashboard and rearview mirror. No warning lights or any fault indication. Approximately 15:42, I put the vehicle in reverse and released the brake Approximately 15:42:30 the vehicle exited the driveway Approximately 15:43 there was a shudder on [XXX] (heading north); the dash lit up with multiple warning lights; the check engine warning illuminated and the ATOIL Temp warning light engaged. At this time, the vehicle rolled down a hill, un-commanded, and only with repeated pumping of the brake did the vehicle stop. Approximately 15:49 I was able to park the vehicle, engaging the hazard flashers and exited the vehicle. While no one was injured in this instance, had this happened on a highway there would have been insurance losses and potential injuries. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Apr 20, 2026 · Fuel system, Transmission · DC

My 2020 Subaru Ascent struggles to retain power when accelerating, especially from stopping and especially when the fuel is low. The vehicle stalls or loses some power when trying to accelerate. The check engine light is not on and there is no other indication that there is a problem with the vehicle. I have discussed it thoroughly with my mechanic and we both think it sounds like a fuel pump issue. He looked at the other Subaru recalls and thinks my vehicle should be included in the other Subaru fuel pump recall (the federal safety agency ID Number: 21V587000). Does my vehicle qualify for this fuel pump recall? Thank you.

Filed Mar 25, 2026 · Driver assistance, Engine · MN

I was driving and I got check engine light and all safety features disabled while I was in the freeway, luckily I was able to drive to nearby Subaru dealer for inspection and I found out that there was a recall on the engine for this vehicle and when I contacted the manufacturer they asked me to take it for diagnostics and I did that at a Subaru retailer, but the case manager told me that this recall is being completed for the previous owner of the vehicle and cannot help me with anything, which was never disclosed when I was buying the vehicle.

Filed Mar 10, 2026 · Transmission · NV

Vehicle: 2020 Subaru Ascent (Build Date: March 2020) Component: Power Train – Automatic Transmission – Hydraulic Pressure Sensor / Wiring Harness The vehicle developed a flashing "Transmission Service" warning and check engine light. It was inspected by a certified technician at Lithia Reno Subaru. Diagnostic scan identified multiple transmission-related codes including P0137, P0700, P2096, P1867, P0867, P2723, and P0841. The technician documented the root cause as: "Found pressure sensor leaking oil through all harnesses." According to the dealership diagnosis, the transmission hydraulic pressure sensor failed and allowed transmission fluid to migrate into the vehicle's electrical wiring harness system. Fluid traveled through the transmission harness and continued into the bulkhead and engine harnesses, contaminating multiple electrical systems. Due to the extent of contamination, the dealership determined that all three harnesses must be replaced. The repair estimate is approximately $8,933. Transmission fluid entering the wiring harness can disrupt communication between the transmission control system and other powertrain components. This electrical contamination can cause erratic transmission operation or sudden loss of propulsion while the vehicle is in motion, increasing crash risk. Subaru has issued recalls and service bulletins involving CVT transmission and hydraulic pressure sensor failures in earlier Ascent vehicles using the same drivetrain. My March 2020 vehicle appears to have experienced the same failure pattern. Despite the documented component failure and extensive wiring contamination, the manufacturer declined to fully cover the repair. I request that the federal safety agency review this failure mode to determine whether hydraulic pressure sensor seal failures allowing transmission fluid to migrate into wiring harness systems represent a broader defect affecting Subaru Ascent vehicles.

Filed Feb 23, 2026 · Transmission · TX

Component/System Failed: The vehicle’s CVT transmission and related transmission components. The transmission and associated components have been replaced multiple times by authorized Subaru dealerships. The vehicle is available for inspection upon request. Description of the Failure and Safety Risk: The vehicle has experienced repeated, intermittent transmission malfunctions, including warning lights, loss of power during acceleration, and sudden harsh re-engagement. Most recently, while accelerating through an intersection from a stop, the vehicle briefly lost power and then abruptly surged forward, causing a pronounced lurch strong enough to chirp the tires. This created a serious safety concern. A hesitation or loss of motive power in an active intersection exposes me to potential cross-traffic collisions, while the sudden re-engagement creates unpredictable acceleration and possible loss of control. The intermittent nature of the malfunction makes it impossible to anticipate when it will occur. Dealer/Manufacturer Involvement: The issue has been reported to and inspected by authorized Subaru dealerships multiple times. Because the malfunction is intermittent, dealers have stated they cannot fully diagnose the issue unless warning lights are active at the time of inspection. Subaru corporate customer advocacy has been involved in reviewing the case. Warning Lamps / Prior Symptoms: Intermittent transmission and check engine warning lights have appeared repeatedly over several months. The lights often illuminate while driving and then turn off after restarting the vehicle, despite the underlying issue not being resolved.