Toyota C-HR recalls
There are 6 safety recalls on record for the Toyota C-HR, covering 87,626 vehicles in total across all the models in each campaign. Newest first.
Toyota C-HR recalls by model year
All recalls
Electrical system: propulsion system
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 C-HR battery electric vehicles. A software programming error may cause the electric drive system battery to become overcharged under certain driving conditions, which can shut down the electric drive system and result in a loss of drive power.
- Risk
- An unexpected loss of drive power increases the risk of a crash.
- Remedy
- Dealers will update the battery electric vehicle electronic control unit (BEV ECU) software, free of charge. Owner notification letters were mailed October 19, 2026. Owners may contact Toyota's customer service at 1‑800‑331‑4331. Toyota's number for this recall is 26TA17.
Recall number 26V570000 · Recall details
Forward collision avoidance: sensing system: radar
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2021 C-HR vehicles. The radar sensor may not have been activated during production, making the pre-collision system (PCS) inoperative.
- Risk
- An inoperative PCS that does not provide a malfunction indicator to the driver, or braking assist as expected, can increase the risk of a crash.
- Remedy
- Dealers will inspect and activate the radar sensor as necessary, free of charge. Owner notification letters were mailed April 22, 2022. Owners may contact Toyota customer service at 1‑800‑331‑4331. Toyota's number for this recall is 22TA02.
Recall number 22V107000 · Recall details
Seat belts: rear/other: buckle assembly
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
- Risk
- In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
- Remedy
- Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1‑888‑270‑9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
Recall number 19V877000 · Recall details
Equipment: other: labels
- What is wrong
- Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
- Risk
- If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
- Remedy
- GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1‑800‑444‑1074. GST's number for this recall is 19R1.
Recall number 19V244000 · Recall details
Power train: axle hubs
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota C-HR vehicles. The rear axle hub bearing bolts may have been insufficiently tightened, causing the bolts to loosen and damage the rear brake components or cause a rear wheel to detach.
- Risk
- If the bolts loosen and damage the rear brake components, or cause a rear wheel to detach, it would increase the risk of a crash.
- Remedy
- Toyota will notify owners, and dealers will inspect the rear axle hub bearing bolts. If a bolt is found to be loose or detached, the dealer will replace the rear axle hub bearing assembly and rear axle carrier sub-assembly, free of charge. The recall began November 6, 2018. Owners may contact Toyota customer service at 1‑888‑270‑9371. Toyota's number for this recall is J0Y.
Recall number 18V710000 · Recall details
Parking brake
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota CH-R vehicles. The electronic parking brake (EPB) may not operate properly, possibly causing the parking brake not to disengage after it is applied or prevent it from being applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard FMVSS number 135, "Light Vehicle Brake Systems."
- Risk
- If the EPB cannot be applied, there is an increased risk of a vehicle rollaway if the vehicle is parked on a hill without being placed into "Park."
- Remedy
- Toyota has notified owners, and dealers will update the programming of the skid control ECU as necessary, free of charge. The recall began on November 30, 2017. Owners may contact Toyota at 1‑800‑331‑4331. Toyota's number for this recall is H0W.
Recall number 17V717000 · Recall details
Questions about the Toyota C-HR recalls
How do I check if my Toyota C-HR has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Toyota C-HR have?
6, covering electrical system, forward collision avoidance and seat belts.
VIN decoder
See the problems and recalls for an exact car
Buying a used Toyota C-HR?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history