The contact owns a 2013 Toyota Tacoma. The contact stated that the ABS activated at approximately 35 MPH while making a turn. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified about the failure. The contact stated that the failure was related to the federal safety agency Campaign Number: 14V054000 (Service Brakes, Hydraulic, Electronic Stability Control). The failure mileage was approximately 92,000.
2013 Toyota Tacoma: ABS light or ABS activating
6 of the 125 complaints about the 2013 Toyota Tacoma describe ABS light or ABS activating.
- owner complaints
- 6
- of this car's complaints
- 5%
- typical mileage
- 48,000
- recalls
- 0
ABS light or ABS activating by model year
What owners say
While driving 40 MPH, the ABS activated on its own and the vehicle started to vibrate while making a turn and the steering wheel began to pull in the opposite direction. This has happened at least 8 times since 2013.
Tl* the contact owns a 2013 toyota tacoma. While driving 40 MPH, the ABS activated on its own and the vehicle started to vibrate while making a turn. The contact was unable to determine if any instrument panel warning lights were illuminated. The contact was able to maintain control of the vehicle. The vehicle was not diagnosed or repaired. The contact has possession of vehicle. The failure mileage was 104,905.
Driving to work traveling at between 55-60 I was going around a slight curve my foot was on the accelerator and out of no where the ABS or stability control or something caused my truck to slam on the brakes causing the front to dive down and a temporary loss of control. No crash just spooked. I drive the route every day the same way never had this happen before. The skid indicator was flashing but no noticeable skid. I am sensitive to that feeling and there was none detected prior to this happening.
Tl* the contact owns 2013 toyota tacoma. The contact stated that while driving approximately 20 MPH making a right turn, the steering wheel became hard to maneuver and the tires made a dragging sound. The ABS and traction control system warning lights illuminated. The failure recurred multiple times. The vehicle was towed to the dealer. The technician was unable to locate a problem. The manufacturer was notified of the failure informed the contact that the VIN was not included in recall the federal safety agency campaign number: 14v054000 (electronic stability control, service brakes, hydraulic). The approximate failure mileage was 3,053.
This is a very commonly reported phenomenon, see the websites listed at the bottom. Reported phenomenon has occurred approximately 10 times within the previous 5000 miles. When entering a turn with no brake applied, most commonly a cloverleaf, the vehicle stability control will engage and apply the brakes in the middle of the turn. No brake lights are displayed so vehicles behind are not aware of the sudden slowing. Environmental conditions were dry, sunny, and the vehicle speed is well within a safe speed. This is very repeatable in specific locations. This problem was been reported to dublin toyota and they do not know how to fix it, but will charge me to try a zero point calibration which is not proven to resolve this known problem. ...http://www.tacomaworld.com/forum/2nd-gen-tacomas/112351-vsc-lift-interaction-how-common.html.... ...http://www.tacomaworld.com/forum/suspension/41215-lift-vsc-answer.html....... ...http://www.tacomaworld.com/forum/2nd-gen-tacomas/167922-who-has-problems-after-3-less-lift-vsc-who-doesnt.html..... ...http://www.tacomaworld.com/forum/2nd-gen-tacomas/272560-ABS-activates-occasionally-after-front-end-lift.html..... ...http://www.tacomaworld.com/forum/2nd-gen-tacomas/92474-recalibrating-vsc-why-how.html..... My truck has an aftermarket add a leaf which increases ride height by 1.5". This truck has the same components that my previous 2006 truck had with no previous occurrences. Please keep in mind that many toyota dealers offer this vehicle with up to a 3" lift.
Service bulletins that may apply
- TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a...
- TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a...
- DL: Safety Recall completion is important not only in satisfying government requirements but also as an...
- A key part to maintain the proper function and safe operation of the vehicle's braking system is to...
Related recalls
No recalls on record for this model year.
Questions about the 2013 Toyota Tacoma abs
Is ABS light or ABS activating a common problem on the 2013 Toyota Tacoma?
6 of 125 owner complaints about the 2013 Toyota Tacoma (5%) mention ABS light or ABS activating. The model year with the most reports is 2006.
Is there a recall or service bulletin for this on the 2013 Toyota Tacoma?
There are 0 recalls and 5 service bulletins for the same area of the car. Check them below with your VIN.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 Toyota Tacoma?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history