2008 Toyota Tundra: ABS light or ABS activating

Filed Aug 24, 2020 · Brakes · 124,360 miles · WI

Re 2008 tundra, the brake pedal goes almost all the way to the floor and feels "squishy" . Wilde toyota in westallis,wisconsin inspected my vehicle and purportedly installed all new brake fluid and said they did a scanning tool computerized bleed of the whole brake system including the ABS pump system bleed. They cahrged me aprox $113.00 for that service and the issue is unresolved...the brake pedal still easily goes to the floor when the vehicle is running. Wilde toyota states that this is a normal condition for this 2008 tundra as they say that they have other 2008 tundra's that do the same. They state their is no fixing of the issue and that they allege my brake pedal travel is within specifications guidelines set by the nhts.. I've searched the internet and have found other toyota owners whom has the similar issue with their brakes. When the truck is not running, the brake pedal is hard and doesn't go to the floor and that it what wilde toyota says is within specifications. But that information or specification isn't relevant when it come to safety, as what is important, is how the brakes work and operate and feel when driving the vehicle. Please look into this matter and consider modifying your specifications and requirments etc of this issue to have the specifications include the distance the brake pedal can travel when driving the vehicle. Thank you in advance for this service you offer. I have a video of me using my weaker left hand to depress the brake pedal when the truck is running,, but it appears mpg4 videos are not allowed to be uploaded with this complaint, therefore I took two screen shots of the video which I am send. One picture shows the top of the brake pedal is resting at approx 4" off the floor, and the second picture shows the top of the brake pedal is 1/2" off the floor when depressed by my left hand and the engine running.

Filed Oct 10, 2017 · Brakes · 109,000 miles · CA

The brake pedal feels "soft" when applying the brakes. Pedal travels farther than usual, must step down hard for brakes to fully engage - no air in brake lines - brake fluid reservoir is full - all brake pads/shoes w/90% life remaining. C1336 code keeps coming up referring to "zero point" calibration, and ABS pump. Condition is present during all types of driving - city - highway - turning - backing. Symptoms started in early september 2017.

Filed Apr 28, 2017 · Acceleration, Brakes · 122,482 miles · FL

Toyota dealership inspection reported on 10/05/16 that actuator assembly failed. Mileage 122,482. Disabiling, ABS brake, speedometer,odometer, cruise control,and displaying engine check lights for ABS. This occurred one day after replacing water pump, water hoses, serpentine belt, and fluids associated with service. Cost estimate $2642.78. Started engine and engine indicator lights showed engine check and ABS malfunction started moving and speedometer cruise control inop along with odometer.

Filed Sep 3, 2015 · Engine, Lights · 55,000 miles · MA

Hi: I owen a 2008 toyota tundera I am having some problems with it the vsc off lights, ABS and skidding lights keep flashing! Took it to dealer they did'nt fine any thing wrong with it.

Filed Apr 12, 2015 · Brakes · 39,460 miles · MT

Started vehicle. Would not shift out of park. Released lock manually and drove to dealer (6 miles). They replaced fusible link and found ABS controller not working. I was told to drive home and they would call 4 days later on availability of used controller ($300 vs $1953). Brakes ok but no ABS. Had same thing happen august 31, 2014. Had the tundra hauled to dealership. Tundra was at the dealership for a month waiting for replacement fusible link. Backordered - out of stock all the way to japan. Toyota had to manufacture more. More than expected demand? Both times warning lights for brake, check engine, ABS, air bag were on. Turn signals and speedometer not working. Dealership told me they had no idea of the cause. Told them low voltage caused this to happen to another vehicle I have. Makes me wonder if there are being truthful with me and if other safety systems may be compromised.

Filed Feb 4, 2015 · Brakes, Driver assistance · 80,000 miles · VA · crash

Tl* the contact owns a 2008 toyota tundra. While driving approximately 40 MPH and attempting to engagr the brakes, the brake pedal sank to the floor and the vehicle failed to stop crashing into a deer. The contact mentioned that immediately after the crash, the vehicle stability control, ab,s and 4wd warning indicators illuminated. The vehicle would no longer shift into 4wd. A police report was filed. The vehicle was taken to the dealer and diagnosed that there was an internal failure in the ABS actuator pump and a faulty speed sensor. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 80,000.

Filed Jan 18, 2015 · Acceleration, Brakes · 97,000 miles · IL

I have been having this on going problem with my 2008 tundra 5.7 4x4 the 4x4 hi/l, vsc, ABS are blinking while driving at different times. Brought truck in ran test and nothing came back. Truck also feels like it bunny hops when going out of first into 2nd gear. Toyota still said nothing is wrong.

Filed Nov 29, 2014 · Acceleration, Brakes · 74,500 miles · NM

2008 toyota tundra 5.7l double cab w/74,500 miles 4hi, 4lo, ABS, vsc lights come on and flash at random intervals. The first time this happened, the cruise was set at 65 when all four lights started flashing. All other indications are normal. The truck will not engage 4hi, 4lo or vsc until it is turned off and restarted. The same day after approximately 10 miles of driving all four lights started flashing again, this time the cruise was not engaged. Sometimes one or two days pass before it happens again. No error codes are indicated on the computer.

Filed Jul 31, 2014 · Electrical, Steering · 180,000 miles · LA

Tl* the contact owns a 2008 toyota tundra. The contact stated that while driving at 50 MPH, the drivers side air bag and the horn light illuminated. In addition, the contact stated that there was an abnormal noise coming from the steering wheel when turing left or right. The steering wheel was difficult to maneuver. The failure occurred on numerous occasions. The vehicle was taken to a private mechanic where it was diagnosed that the spiral cable needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 180,000. Updated 09/05/14*lj the consumer stated the tire warning light illuminated, the horn, ABS and cruise control were inoperative. Updated 09/09/14

Filed Mar 12, 2014 · Brakes, Transmission · 42,700 miles · IL

I started my truck and noticed that the ABS brake light was on and the vehicle stability control (vsc) light and the 4-hi and 4-lo lights were flashing as well. The parking lot I was in was mostly empty and slick, so I tried a hard breaking and sure enough the ABS system fails to operate. I tried to accelerate and the vsc failed to work as well. I tried to shift into 4 wheel drive and that failed as well. I went online and found a number of forums where others talked about having the exact same failure. Some stated that the wiring harness failed, others that it was a bad connection. I feel that a failure like this without warning can put drivers at risk. We have come to rely on these technology advances making our vehicles safer to drive, and if they fail without warning, in the middle of a hard braking situation, this could lead to disastrous situation and possible loss of life.

Filed Feb 27, 2013 · Brakes · 43,331 miles · CA

Tl* the contact owns a 2008 toyota tundra. The contact stated that the antilock brake light illuminated and the speedometer did not register current vehicle speed. The vehicle was taken to the dealer who performed a diagnostic which located the failure at the ABS actuator. The manufacturer was not made aware of the failure. The VIN was not available. The vehicle was not repaired. The failure and current mileage was 43,331.

Filed Oct 14, 2011 · Brakes, Electrical · 49,715 miles · MA

The ABS actuator failed on my 2008 toyota tundra. Which causes all my dash function to fail, no antilock brakes, no 4x4, speedometer inoperable. Cost for repairs. $2500. Trucks only three years old.