E-one would like to make sure customers are aware of the proper aerial operating sequence when using their...
E-One technical service bulletin 2016-0894 for 2007-2016 E-One C2 and 2014, 2016 E-One Quest II.
- Bulletin number
- 2016-0894
- Component
- Equipment
- Summary
- E-one would like to make sure customers are aware of the proper aerial operating sequence when using their hp100 platforms. When setting up outriggers it is expected that the system be transferred to aerial mode after outriggers are set, even if you do not intend on using the aerial device right away. The aerial circuit has better cooling capacity and operates at a lower standby pressure than the outrigger system. The outrigger system operates on a high pressure standby system to ensure responsive and timely deployment of outriggers. If the pto is left engaged for extended periods of time, while the system is in jack mode, it could overheat. It is also expected of the customer to disengage the pto whenever the system is not used. If the outriggers are set, and the aerial device is not needed, please either turn off the pto or engage the aerial system within 10 minutes.
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used E-One C2?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history