This Preliminary Information communication provides information to the technician how to diagnose and...
Chevrolet technical service bulletin PIP5130B for 2014 Chevrolet Silverado 1500, 2014 GMC Sierra 1500 and 2014 Chevrolet Corvette and others.
- Bulletin number
- PIP5130B
- Component
- Fuel system, gasoline
- Summary
- This Preliminary Information communication provides information to the technician how to diagnose and repair vehicles with an engine that runs with an intermittent crank no start with a Diagnostic Trouble Code P0011 or P00C6 current or history. Technician will need to use Global Diagnostic System 2 to actuate the cam phaser solenoid 4 or 5 times then try starting the vehicle. Then disable the ignition and fuel system. After the ignition and fuel system are disabled try to start the engine. Technician can now unplug the camshaft actuator to perform the following. Install a 20A fused jumper wire between the terminal 2 and 12V. Tickle/tap the low reference terminal 1 to ground on the cam actuator magnet, while cranking the engine over. When the engine starts and runs the cam actuator or oil control valve does not need to be replaced.
Vehicles covered
- Chevrolet Silverado 1500 2014 2014
- GMC Sierra 1500 2014 2014
- Chevrolet Corvette 2014 2014
- Chevrolet Silverado 2500 2014 2014
- GMC Sierra 2500 2014 2014
VIN decoder
See the problems and recalls for an exact car
Buying a used Chevrolet Silverado 1500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history