Some 2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated MIL on with DTC...
Ford technical service bulletin SSM 47158 for 2018 Ford Escape.
- Bulletin number
- SSM 47158
- Component
- Engine and engine cooling: cooling system: hoses/lines/piping/fittings
- Summary
- Some 2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated MIL on with DTC P051B. This DTC sets when the PCM detects a sensor offset greater than a calibrated threshold just prior to engine cranking or if it detects crankcase pressure outside of the calibrated limit during low engine air flows. If DTC P051B is set with any other codes, diagnose and repair those DTCs first. If DTC P051B is the only DTC, remove and inspect the crankcase ventilation tube and sensor for ice/water. If any ice/water is found, replace the sensor and tube assembly. If no ice or water is found, follow Pin Point Test HG for the crankcase ventilation sensor and note that step HG4 should be performed KOEO only. Engineering is currently investigating. Monitor OASIS for updates.
Owners of these vehicles have filed 1,455 complaints in the engine category.
Vehicles covered
- Ford Escape 2018 2018
VIN decoder
See the problems and recalls for an exact car
Buying a used Ford Escape?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history