This is a Technical Journal: "BLIS service required" may be displayed in DIM(Drivers Information Module)...
Volvo technical service bulletin TJ25252.7.0-2016 for 2005-2013 Volvo XC90, 2011-2013 Volvo S60 and 2007-2013 Volvo S80 and others.
- Bulletin number
- TJ25252.7.0-2016
- Component
- Equipment adaptive/mobility
- Summary
- This is a Technical Journal: "BLIS service required" may be displayed in DIM(Drivers Information Module) intermittently during start, without any corresponding DTC's set. This may occur if the BLIS camera heating element is broken due to a hot spot, or if the lead cable for the heater element has become loose due to a bad soldering. Start the engine and make sure that the ambient temperature is below 28ºC (82ºF) to activate the heater function. Test the heater element function by touching the BLIS camera lens with your finger, or spray ice spray to see if the ice disappear. If there is no heat detected, then remove the mirror from the car and access the heater element for inspection. If there is a visible hot-spot on the heater element, or a loose lead cable, replace the heating element according to VIDA instructions.
Vehicles covered
- Volvo XC90 2005-2013 20062007200820092010201120122013
- Volvo S60 2011-2013 201120122013
- Volvo S80 2007-2013 2007200820092010201120122013
- Volvo V70 2008-2010 200820092010
- Volvo XC60 2010-2013 2010201120122013
- Volvo S40 2007-2012 200720082009201020112012
- Volvo XC70 2008-2013 200820092010201120122013
- Volvo C70 2007-2013 2007200820092010201120122013
- Volvo C30 2007-2013 2007200820092010201120122013
- Volvo V50 2007-2012 200720082009201020112012
VIN decoder
See the problems and recalls for an exact car
Buying a used Volvo XC90?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history