This bulletin supersedes the previously issued bulletin(s) listed below

Bulletin number

01-002-26a

Component

Engine

Summary

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 01-002/26 01/07/26 DESCRIPTION Some vehicles may exihibit a vibration in the accelerator pedal and steering wheel when accelerating during a sharp left-hand turn. An abnormal noise may also be heard from the footwell area. This may be caused by insufficient clearance between the engine mount stopper rubber and the engine mount bracket. Customer may state: Vehicle shudders/vibrates on left turns, most often when accelerating from a stop or entering a driveway. • They feel a pop or grind in the accelerator pedal when the vibration occurs. • They hear a rumbling or grinding noise, mainly from the right side, during the left-turn shudder. • NOTE: The condition does not occur at shallow steering angles or when the vehicle is stationary and the steering effort remains unchanged when the vibration and noise are present. REPAIR PROCEDURE 1. Verify the customer concern. NOTE: DO NOT use power tools in this procedure. Use hand tools only. 2. Disconnect the negative battery terminal using the procedure in [NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION]. 3. Remove the engine cover. b. Replace the stopper rubber (2) with a modified part.

Owners of these vehicles have filed 102 complaints in the engine category.