During a ride in the mountains, I started to hear a loud noise from the front end of my motorcycle. I pulled off the road to check and found that the rear portion of my front fender had broken away from its fork mounts and was rubbing against the wheel. Without the fork mounts, the fender is loose enough to bounce up into the motorcycle fairing and effect the steering. I believe the sound I was hearing was the fender hitting the fairing whenever I turned. Since the fender portion was now only being held on by two 'push fasteners' to the front portion of the fender, I immediately removed that portion for the remainder of the ride. I was very fortunate that the fender did not catch on the fairing and lock up my steering. This is the second time I have had the fender brake in the same spot. The first was about two years ago, but I caught it when it was only cracked and had not dislodged from the mounting brackets.
The worst 2010 Victory Ness Vision problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Body1
- Brakes1
- Steering1
- Wheels1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Body1
- Brakes1
- Steering1
- Wheels1
Recalls
No recalls on record for this model year.
Technical service bulletins for the 2010 Victory Ness Vision 1
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
What 2010 Victory Ness Vision owners say
Most recent owner complaints, unedited.
There is a severe problem with the rear brakes on all victory vision motorcycles from model year 2008 to 2010 that are not equipped with ABS. Air somehow gets into the system causing the rear brakes to become completely ineffective with absolutely no warning. There have be numerous complaints from many people about this issue and victory's stance remains that simply bleeding the brakes is the solution to the problem. This is nothing more than a temporary solution and does not fix the design flaw. Sooner or later this problem is going to get people killed. Victory apparently solved this problem when they switched to the newer ABS system that was an option on 2010 vision models and standard on 2011 and newer models. It seems that in their mind, the problem is solved but they are trying to sweep the problem with the older non ABS models under the rug. This is unacceptable. I can't think of a worse safety issue than frequently losing brakes with no warning on the highway. Victory needs to step up the plate and recall these affected motorcycles.
Compare the 2010 Victory Ness Vision
Other model years
20102012
Questions about the 2010 Victory Ness Vision
Is the 2010 Victory Ness Vision reliable?
Owners have filed 2 complaints about the 2010 Victory Ness Vision, close to a typical Ness Vision model year.
What is the most common problem with the 2010 Victory Ness Vision?
Body and structure, with 1 complaint. Next is brakes (1).
How many recalls does the 2010 Victory Ness Vision have?
No recalls on record.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Victory Ness Vision?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history