2001 Volvo VNM problems

What is wrong

Volvo trucks is recalling certain model year 2001-2006 vnl and vnm trucks manufactured with a trw sealed drag links. Certain factors can exist, which if left untreated may result in a ball socket separation.

Risk

Ball socket separation at the drag link results in complete loss of steering, and therefore can result in a vehicle crash.

Remedy

Dealers will inspect and repair the ball socket or the drag link as required if necessary. As parts are limited, volvo trucks mailed an interim owner letter on september 2, 2010. The safety recall began on february 14, 2011. Owners may contact volvo trucks at 1‑800‑528‑6586.

Recall number 10V282000 · Recall details

What is wrong

Volvo trucks is recalling 127,764 my 2001-2008 vhd, vnl, vnm, and my 2005-2008 vt trucks. A seal may fail allowing water and contaminants to seep into the windshield wiper motor.

Risk

If this happens a short circuit may occur, which over time could possibly lead to a vehicle fire.

Remedy

Volvo will replace the wiper motor free of charge. Since this recall involves a large number of vehicles, volvo will release the recall in stages as parts are received. Priority will be given to the vehicles located in the regions/states that have a corrosive environment. The recall began on september 30, 2009. Owners may contact volvo trucks at 1‑800‑528‑6586.

Recall number 09V173000 · Recall details

What is wrong

On certain heavy-duty class trucks, salt and other highway snow and ice removal chemicals are getting under the protective caps of the chassis mounted emergency start studs and corroding them. This condition deteriorates the studs and the connections.

Risk

Over time the studs may loosen sufficiently to cause an electrical short.

Remedy

Dealers will install new chassis mounted emergency start studs and associated battery cables. Owner notification is expected to begin during november 2003. Owners should contact volvo at 1‑800‑528‑6586.

Recall number 03V381000 · Recall details

What is wrong

On certain heavy duty trucks equipped with jost international jsk 37u series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.

Risk

If left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.

Remedy

Dealers will replace the bracket pins and repair instructions free of charge. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact jost international at 616‑846‑7700 or by email to [email protected] or volvo truck at 800‑528‑6586.

Recall number 03V204000 · Recall details

What is wrong

On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.

Risk

Seizure of the bearings can cause wheel separation or wheel end fire.

Remedy

Dealers will replace all front axle hubs. An interim notice to owners was mailed on june 25, 2003. Final owner notification began on october 6, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo at 1‑800‑528‑6586.

Recall number 03V199000 · Recall details

What is wrong

Certain heavy duty class 8 trucks fail to comply with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." the two tail lamps, back-up lamp,and license tag lamp were mounted on insufficiently rigid mounts.

Risk

It may not allow the driver of a rearward approaching vehicle to have full view of the lamps.

Remedy

Dealers will attach the two tail lamps, back-up lamp, and the license tap lamp on stiffer brackets. Owner notification began october 31, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.

Recall number 02V238000 · Recall details

What is wrong

Certain heavy duty class 8 vehicles fail to comply with federal motor vehicle safety standard no. 121, "air brake systems", s5.1.6.3, "antilock power for towed vehicles." electrical power for the trailer anti-lock braking system (ABS) can be disrupted when a switch located on the vehicle instrument panel is activated to control lighting within the trailer.

Risk

If this condition occurs, the driver can lose of the towed vehicle, possibly resulting in a vehicle crash.

Remedy

Dealers will install a wiring harness which will provide continuous electrical power to the trailer ABS whenever the ignition switch is in the on or run position. Owner notification began april 29, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.

Recall number 02V110000 · Recall details

What is wrong

On certain heavy duty trucks equipped with meritor wabco pneumatic anitlock brake system (ABS) valve packages, the assembly bolts on these valve packages were not tightened correctly.

Risk

Bolts torqued below specification will not reliably prevent air leakage at the affected ABS valve package interface joints once the component begins normal vehicle operation. If air leaks develop at any of the ABS valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash.

Remedy

Dealers will tighten the fasteners to the proper specification. Owner notification began february 27, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.

Recall number 02V018003 · Recall details

What is wrong

Certain heavy duty class 8 trucks fail to comply with the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment." two reflectors are missing from the end of the frame crossmember.

Risk

At night, in a bob-tailed (no trailer) condition, the rear of the truck may not be as visible to vehicles following the truck, increasing the risk of a crash.

Remedy

Dealers will install the two missing reflectors. Owner notification began december 12, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.

Recall number 02V014000 · Recall details

The companies involved in this matter are: skf (hub mfr), arvinmeritor (front axle mfr), and volvo (manufacturer of class viii tractor/trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvinmeritor.as a result, arvinmeritor notified volvo of axles supplied with possible defective front hub assemblies.as a result of that notification, 433 trucks are being recalled by volvo for defective front axle wheel bearings which may fail in such a way that a wheel separation or wheel bearing fire occurs.see attached summary report for additional details.

PE02095